Abstract:Local temperature non-uniformity is a critical limit to power in large-area semiconductor lasers, playing a larger role than the conversion efficiency and temperature sensitivity in the most efficient modern devices. For the specific case of kilowatt-level edge-emitting diode laser bars, we demonstrate that laterally re-distributing current locally within each emitter using a customized micro-structuring of the electrical contact can flatten the thermal profile, based on the thermal design using COMSOL. The concept is demonstrated experimentally in adapted bars that contain eight broad-area emitters, each having wide (∼1100 μm) stripes and a 4 mm long resonator. Each emitter in the laser bar has an electrical contact layer that is electrically structured into parallel sub-contacts using implantation, essential to prevent lateral lasing, implemented here with a period of 29 μm. The width of the individual sub-contacts is narrowed in the device center and then monotonically increased toward the emitter edges to collect a higher proportion of heat at the edges, for a fivefold reduction in the thermal lens, despite a significant (20%) overall increase in electrical and thermal resistance. Two performance benefits are observed. First, the slope varies more slowly with average temperature, recovering (here) around half of the efficiency penalty from in-stripe temperature non-uniformity, and hence increasing the power conversion efficiency at 800 W optical output power by around 5%. Second, the lateral far field (95% power content) is narrowed by around 2° at 800 W optical output power, corresponding to a reduction of around half of the thermal contribution.

10 kW rectangular laser beam generation with incoherent space combiner

Finite Element Thermal Analysis of Optical Elements in a Laser Incoherent Space Beam Combiner

Space-Incoherent Beam Combining of Rectangular Spot Using 18 Fiber-Transmitted Semiconductor-Laser Beams

Coherent Combining of Two Pulsed Solid State Lasers

A Binary Beam-Splitter For Lidar Beam-Shaping In Laser Imaging Application - Art. No. 66241j

High-robustness good-beam-quality 3×1 signal combiner device for 10-kW all-fiber laser combining applications

All-fiber cascaded combiners for high-power adjustable-ring mode laser beam with a flattop central beam

Novel 3 × 1 signal combiner with high-power fiber laser output of high beam quality

High power ring spot adjustable fiber combiner based on (6 + 3) × 1 structure

High Power Semiconductor Laser Beam Combining Technology and Its Applications

A Hybrid Incoherent Sequence Combining of Pulsed Lasers Based on Refraction-Displacement-Pulsed-Combining and Polarization Beam Combining

Analysis of far-field characteristics of spatial coherent beam combining fiber lasers

Tapered Fused Fiber Bundle Coupler Capable of 1 Kw Laser Combining and 300 W Laser Splitting

High power signal combiner for fiber lasers

Coherent Beam Combination of Ultrafast Fiber Lasers

Scalable structure of coherent polarization beam combining based on tapered diode laser amplifiers

Micro-structured lateral thermal lens for increased output power and narrowed beam divergence in kilowatt-class 9xx nm diode laser bars

Combined Supercontinuum Source with >200 W Power Using a 3 × 1 Broadband Fiber Power Combiner.

High power mid-infrared side-pump combiner with good thermal stability based on the point-by-point fusion splicing technique

End-pump silica-fluoride fiber combiner utilizing tapering and assembling technique for mid-infrared laser systems

Experimental Investigation of Laser Power Addition with Composite Four-Mirror Cavity