Abstract:We have developed a photoacoustic (PA) sensor using a low-power, continuous- wave laser and a kHz-range microphone. The sensor is simple, flexible, cost-effective, and compatible with commercial optical microscopes. The sensor enables noncontact PA measurements through air, whereas most current existing PA techniques require an acoustic coupling liquid for detection. The PA sensor has three main components: one is the chamber that holds the sample, the second is a resonator column used to amplify the weak PA signals generated within the sample chamber, and the third is a microphone at the end of the resonator column to detect the amplified signals. The chamber size was designed to be 8 mm × 3 mm as the thermal diffusion length and viscous-thermal damping of air at room pressure and temperature are 2 and 1 mm, respectively. We numerically and experimentally examined the effect of the resonator column size on the frequency response of the PA sensor. The quality factor decreased significantly when the sample chamber size was reduced from 4 mm × 3 mm to 2 mm × 3 mm due to thermos-viscous damping of the air. The quality factor decreased by 27%, demonstrating the need for optimal design for the sample chamber and resonator column size. The system exhibited noise equivalent molecular sensitivity (NEM) per unit bandwidth (NEM / √ Δf) of ∼19,966 Hz - 1/2 or 33 × 10 - 21 mol or 33 zeptomol, which is an improvement of 2.2 times compared to the previous system design. This PA sensor has the potential for noncontact high-resolution PA imaging of materials without the need for coupling fluids. .

A high-performance infrared photoacoustic sensor with improved low-frequency response microphone

Research of high sensitive resonant infraredphoto-acoustic gas sensor

Experimental design and numerical investigation of a photoacoustic sensor for a low-power, continuous-wave, laser-based frequency-domain photoacoustic microscopy.

New silicon-based micro-electro-mechanical systems for photo-acoustic trace-gas detection

Acoustic Microresonator Based In-Plane Quartz-Enhanced Photoacoustic Spectroscopy Sensor with a Line Interaction Mode

Photoacoustic Imaging Based on AlN MF-PMUT with Broadened Bandwidth

Active noise reduction for a differential Helmholtz photoacoustic sensor excited by an intensity-modulated light source

Highly Sensitive Capacitive MEMS for Photoacoustic Gas Trace Detection

Trace gas sensor based on quartz tuning fork enhanced laser photoacoustic spectroscopy

Photoacoustic Detection of CO2 Based on Mid-Infrared LED

Integrated near-infrared fiber-optic photoacoustic sensing demodulator for ultra-high sensitivity gas detection

A Sensitive Carbon Monoxide Sensor Based On Photoacoustic Spectroscopy With A 2.3 Mu M Mid-Infrared High-Power Laser And Enhanced Gas Absorption

Photoacoustic Mesoscopy with Lower Cost: Using Photothermal Tunable Fabry-Perot Interferometric Ultrasound Sensor

A Gas Medium Approach to Sensitivity Improvement of MEMS-Based Thermal Acoustic Particle Velocity Sensors

Trace Gas Detection Based On Off-Beam Quartz Enhanced Photoacoustic Spectroscopy: Optimization And Performance Evaluation

Highly Sensitive Photoacoustic Gas Sensor with Micro-Embedded Acoustic Resonator for Gas Leakage Detection.

T-Type Photoacoustic Sensor Based on Multiple Reflection of Light Beams

Reflection-Mode Optical-Resolution Photoacoustic Microscopy With High Detection Sensitivity By Using A Perforated Acoustic Mirror

Highly sensitive broadband differential infrared photoacoustic spectroscopy with wavelet denoising algorithm for trace gas detection

Fiber-Optic Photoacoustic Gas Microsensor Dual Enhanced by Helmholtz Resonator and Interferometric Cantilever

T-shape microresonator-based high sensitivity quartz-enhanced photoacoustic spectroscopy sensor