Abstract:Microelectromechanical system resonant sensors are widely used in high precision applications. Frequency measurement plays an important role in such frequency readout sensors. This paper proposed an improved modified frequency measurement method based on the multi-phase clock (MPC), which can effectively improve the measurement accuracy but does not reduce the output rate. Innovative claims include (1) building a model of measurement error for MPC in which the probability of triggering error under different conditions is calculated, (2) improving the accuracy of the MPC measurement by phase reverse, and (3) proposing an algorithm to eliminate jitters of the measured signal. We compared the measurement results of this optimized MPC realized by the field programmable gate array (FPGA) device with those of the conventional MPC, spectral measurement, and equal precision measurement implemented with the National Instruments acquisition equipment PXI-4461 and USB-6366, respectively. The results show that the bias instability of the adopted method is ∼10 µHz obtained by Allan variance analysis, which is better than that of the other three methods. It can meet the accuracy requirements for the resonant frequency measurement of state-of-the-art resonant accelerometers. In addition, an algorithm running in FPGA is proposed to eliminate jitters caused by the noise of the measured signal for enhancing the robust of optimized MPC. The results demonstrate that the optimized MPC has features of high accuracy and anti-interference capability and can be easily transferred to the application specific integrated circuit in the future due to its full digital circuit version.

Frequency Detector with Self-Adjusted Detecting Time Based on a Resemble-State Machine Controller

Design of A Programmable Multi Frequency Detector

Non-Sequential Linear Cmos Phase Detector for Cdr Applications

Design Of A Low Power Wide-Band High Resolution Programmable Frequency Divider

An Intermittent Frequency Synthesizer with Accurate Frequency Detection for Fast Duty-Cycled Receivers

A Design of Tri-state Phase-Frequency Detector

High-precision Frequency Measurement for Microresonant Sensors Based on Improved Modified Multi-Phase Clock Method.

A Low-Power and High-Frequency Phase Frequency Detector for a 3.33-GHz Delay Locked Loop

Design of 0.5 V low-voltage phase and frequency detector for frequency synthesizer in wireless sensor networks

Robust CMOS phase frequency detector for high speed and low jitter charge pump PLL

Automatic Frequency Detection Circuit for First Intermediate Frequency of DRM/DAB Receivers

An SEU/SET-Tolerant Phase Frequency Detector with Double-Loop Self-Sampling Technology for Clock Data Recovery

A Novel Configurable No Dead-Zone Digital Phase Detector Design

Frequency-Modulated Signal Measurement Using Closed-Loop Methodology

FLC-EDC: A Fast Low-Cost Error Detection and Correction Scheme for AVFS System Based on Flip-Flops Resampling in 28-Nm CMOS

Adaptable Frequency Counter With Phase Filtering for Resonance Frequency Monitoring in Nanomechanical Sensing

Prospective Phase Frequency Detector Design Architectures for RF Transceiver Applications

Simplified version of frequency detector derived from the maximum-likelihood principle

Design and Research on a Novel UFLS Device Based on MCF52235

Frequency-fixed Vehicle Detector Based on FPGA

Design of Phase Frequency Detector with Low Jitter