Abstract:Microelectromechanical system resonant sensors are widely used in high precision applications. Frequency measurement plays an important role in such frequency readout sensors. This paper proposed an improved modified frequency measurement method based on the multi-phase clock (MPC), which can effectively improve the measurement accuracy but does not reduce the output rate. Innovative claims include (1) building a model of measurement error for MPC in which the probability of triggering error under different conditions is calculated, (2) improving the accuracy of the MPC measurement by phase reverse, and (3) proposing an algorithm to eliminate jitters of the measured signal. We compared the measurement results of this optimized MPC realized by the field programmable gate array (FPGA) device with those of the conventional MPC, spectral measurement, and equal precision measurement implemented with the National Instruments acquisition equipment PXI-4461 and USB-6366, respectively. The results show that the bias instability of the adopted method is ∼10 µHz obtained by Allan variance analysis, which is better than that of the other three methods. It can meet the accuracy requirements for the resonant frequency measurement of state-of-the-art resonant accelerometers. In addition, an algorithm running in FPGA is proposed to eliminate jitters caused by the noise of the measured signal for enhancing the robust of optimized MPC. The results demonstrate that the optimized MPC has features of high accuracy and anti-interference capability and can be easily transferred to the application specific integrated circuit in the future due to its full digital circuit version.

Frequency-Modulated Signal Measurement Using Closed-Loop Methodology

JLHS: A Joint Linear Frequency Modulation and Hyperbolic Frequency Modulation Approach for Speed Measurement.

Ultra-broadband multi-tone frequency measurement based on the recirculating frequency shift of a frequency modulated continuous wave

High-precision Frequency Measurement System Based on Different Frequency Quantization Phase Comparison

Study of measurement circuit based on IFM

Study on Error Measurement Method for Actuator Frequency Characteristic Test System

A Novel Amplitude and Frequency Demodulation Algorithm for Frequency-Modulation Atomic Force Microscope

High-Resolution Multi-Channel Frequency Standard Comparator Using Digital Frequency Measurement

High-precision Frequency Measurement for Microresonant Sensors Based on Improved Modified Multi-Phase Clock Method.

New Measurement of Digital Frequency Based on Auto-Adapted and Equal-Precision Technique

Microwave Frequency Measurement System Using Fixed Low Frequency Detection Based on Photonic Assisted Brillouin Technique

Dynamic Distance Measurement Based on a Fast Frequency-Swept Interferometry

A High-Precision and Wideband Fundamental Frequency Measurement Method for Synchronous Sampling Used in the Power Analyzer

Design and Analysis of Wideband Digital Frequency Measurement Based on Optical Sub-Sampling

Research on a method of high precision frequency measurement based on coordinate rotation digital computer algorithm and Kalman filter

A High Precision Fundamental Frequency Measurement Method Based On Fpga

High Precision Antenna Far-Field Measurement System Based On Pulse Trigger And Closed Loop Control Technology

The Research On Absolute Distance Measurement Based On Large-Bandwidth Reverse-Synchronous Dynamic Frequency Scanning Interference

A High-precision Frequency Stability Meter Based on Frequency-offset Locked Loop Beat Method

High-Precision Photonics-Assisted Two-Step Microwave Frequency Measurement Combining Time and Power Mapping Method

Error Analysis and Improvement of Equal Precision Frequency Measurement