Progress of Large-Bandwidth Optical Signal Measurement Technology(Invited)
Li Lun,Liu Saiyang,Gong Yitian,Zhang Chi,Zhang Xinliang
DOI: https://doi.org/10.3788/aos232000
2024-01-01
Acta Optica Sinica
Abstract:Significance In recent years,with the development of broadband network applications such as real-time video calls and virtualized data centers,network traffic capacity has increased exponentially.Cloud service providers and hyperscale data center operators are gradually moving from 400 Gigabit Ethernet to 800 Gigabit Ethernet to meet the growing network capacity needs.Meanwhile,with the development of ultrafast laser technology,the pulse width has reached femtosecond or even attosecond levels.The trend of optical communications and the ultra-short optical pulses indicate that the optical signal bandwidth has exceeded 1 THz.The widespread applications of advanced modulation formats and multi-dimensional multiplexing technology in optical communications have analyzed high-speed signals more complex,putting forward higher requirements for measurement technology's bandwidth,speed,and detection information dimension.Currently,the available largest bandwidth real-time oscilloscope is developed by Keysight(UXR1104A),with an analog bandwidth of 110 GHz.Due to the electronic bottleneck limitations,making more significant progress in the bandwidth of time-domain detection technology is challenging.Meanwhile,the applications under advanced modulation format measurement scenarios are hard to realize due to square rate detection and lack of signal phase information. Progress The bandwidth of direct time-domain measurement methods is limited by electrical bottlenecks.To expand the measurement bandwidth,we propose a multi-channel coherent synthesis solution to achieve an equivalent real-time bandwidth of 160 GHz,but the system is complex and expensive.Additionally,asynchronous sampling solutions can significantly increase measurement bandwidth but are only suitable for repetitive periodic signals,such as commercial communication signal analyzers or eye diagram analyzers,which are usually employed for optical performance monitoring.Meanwhile,the sampling scheme cannot achieve synchronous WDM signal observation.Methods based on the time-lens have been proposed to detect non-repetitive and large-bandwidth signals and thus significantly relax the bandwidth limitation by magnifying the time axis.However,it is mainly limited by the signal degradation caused by the time-lens generation process,generally with the difficulty of observing the phase information of the signal.To overcome the bandwidth limitations of temporal schemes,researchers look to the signal's frequency domain.FROG can retrieve the full-field spectrum and achieve a temporal resolution of several femtoseconds over a window of tens of picoseconds.However,the involved mechanical scanning and iterative algorithms are too time-consuming(kHz frame rate)to observe ultrafast telecommunication data.On the other hand,the optical Fourier transform based on the dispersive Fourier transform or time-lens can realize time-to-frequency mapping and obtain the ultrafast temporal waveform by optical spectrum analyzers or the inverse Fourier transform of the large-bandwidth spectrum.Although this method can achieve 220 fs resolution,it cannot obtain phase information.With the help of spectral interferometry technology,spectral amplitude and phase information can be obtained simultaneously.The temporal full-field waveform with 400 fs resolution can be reconstructed,although fewer phase ambiguity still exists without phase diversity.Our group employs the chirped LO coherent detection technology to further reduce the phase ambiguity via phase diversity to achieve real-time full-field spectrum and temporal waveform measurement of arbitrary optical signals and yield a measurement bandwidth of 3 THz. Conclusions and Prospects Large-bandwidth optical signal measurement is currently a bottleneck in optical communications,especially the limitation of electrical bandwidth,which has restricted our country's development in advanced optical communications.Especially with the bandwidth improvement of high-speed communication devices and the development of multiplexing technology,the further enhancement of communication capacity has also posed challenges to optical performance monitoring.Therefore,further expanding the bandwidth of the measurement system is a key technology to be solved urgently.We review large-bandwidth measurement methods,analyze each technology's advantages and application scenarios,and illustrate a representative real-time large-bandwidth vector oscilloscope scheme.In addition to its applications in optical communications,this real-time full-field measurement system can facilitate the characterization of some transient phenomena,such as the microresonator dissipative Kerr solitons dynamics and terahertz waves over an optical carrier.Finally,this optical real-time vector oscilloscope provides a promising scientific and industrial tool for advanced optical communication systems and ultrafast optical measurement.