XRD analysis of scandate cathodes

Wei Liu,Jinshu Wang,Yiman Wang,Yuntao Cui,Xizhu Zhang,Meiling Zhou

DOI: https://doi.org/10.1109/IVEC.2011.5747048

2011-01-01

Abstract:Possible chemical reaction in the scandate cathode at different temperature has been discussed in this paper.

What problem does this paper attempt to address?

Advances in Scandate Cathode

Jinshu Wang

DOI: https://doi.org/10.1109/ivecivesc60838.2024.10694867

2024-01-01

Abstract:This paper reviewed recent results on scandate cathode developed in our group, especially on the surface analysis of cathode surface and the role of active substance in the cathode. We confirmed the formation of Ba-Sc-O active layer on the scandate cathode by high temperature in-situ TEM observation.
Study of surface nano-particles of scandate cathodes

Xizhu Zhang,Yiman Wang,Jinshu Wang,Wei Liu

DOI: https://doi.org/10.1109/IVESC.2010.5644462

2010-01-01

Abstract:Scandate cathode exhibits the highest emission property among all the thermionic cathodes. Scanadia Doped Dispenser cathode (SDD cathode) is one of the promising cathodes due to its good emission property and reproducibility. The impacts of local electric field enhancement on emission capability of cathode have be considered by applying the actions of Schottky effect and electric field on semiconductor model presented by D. Wright[1]. The calculation results show that the current densities near the spherical nanoparticles are less than 2 times higher than that of the surrounding area. After operating with high current densities at high temperatures for a relative long time, this function was reduced due to the loss of the nanoparticles.
Development of scandate cathode and its prospect_ a review

Yiman Wang,Jinshu Wang,Wei Liu

DOI: https://doi.org/10.1109/IVESC.2012.6264158

2012-01-01

Abstract:Summary form only given. High current density scandate cathodes have aroused great interest in recent years. In this paper the emission performances of scandate cathodes and the possible chemical and physical processes occurred during cathode manufacturing and operation are summarized. Emission mechanisms are further discussed. The major problems of this kind of cathode and its application prospects are reviewed.
Characterization of Scandate Cathode Emission

Xizhu Zhang,Yiman Wang,Jinshu Wang,Wei Liu

DOI: https://doi.org/10.1109/ivelec.2009.5193584

2009-01-01

Abstract:Characterization of emission properties of scandia doped dispenser (SDD) cathodes with Longo-Vaughan equation has been discussed in this paper.
Surface characteristics of scandate dispenser cathodes during life

Jinshu Wang,Yiman Wang,Xi Wang,Xizhu Zhang

DOI: https://doi.org/10.1109/IVEC.2013.6571168

2013-01-01

Abstract:To find the changes of surface compositions during life time of the Scandia-doped impregnated dispenser cathodes, two cathodes have been tested at an activation temperature of 1150°CB-Mo and an operation temperature of 1000°CB-Mo , respectively, in an AES system up to more than 7,000 hours. Surface compositions were monitored in-situ at intervals. The tested results have been reported and discussed in this paper.
A Study of Scandia-Doped Pressed Cathodes

Jinshu Wang,Wei Liu,Lili Li,Yanchun Wang,Yiman Wang,Meiling Zhou

DOI: https://doi.org/10.1109/TED.2009.2015423

IF: 3.1

2009-01-01

IEEE Transactions on Electron Devices

Abstract:Scandia (Sc)-doped pressed cathodes were prepared by different methods, including mixing of scandium oxide and barium-calcium aluminates with tungsten by manual mechanical mixing, high-energy ball-milling, and liquid-liquid doping. The surface behavior of the active substance, microstructure, and emission properties of the cathodes has been studied by auger electron spectroscopy, scanning electron...
A review on scandia doped tungsten matrix scandate cathode

Jinshu Wang,Yunfei Yang,Yiman Wang,Wei Liu,Meiling Zhou,Tieyong Zuo

DOI: https://doi.org/10.1007/s42864-019-00007-8

2019-01-01

Tungsten

Abstract:As the cathode with the highest electron emission capability in the thermionic cathode, the scandate cathode has attracted more and more attention in recent years, especially the scandia doped tungsten matrix scandate cathode. Experimental studies show that scandia doped tungsten matrix scandate cathodes with submicron microstructures exhibit excellent emission capacity, and the pulse emission current density in the space-charge region can be over 35 A cm −2 at 850 °C b . In the direct current (DC) condition with temperature compensation, the emission current density could reach 25 A cm −2 at 850 °C b . The device lifetime is over 3700 h after operating at 950 °C b with the DC loading of 40 A cm −2 . The emission mechanism of the scandate cathode including the effect of the surface structure and composition on the work function of the cathode are systematically reviewed.
Preparation and Surface Characteristics of Re3W Matrix Scandate Cathode: an Experimental and Theoretical Study

Chen Lai,Jinshu Wang,Fan Zhou,Wei Liu,Peng Hu,Changhao Wang,Ruzhi Wang,Naihua Miao

DOI: https://doi.org/10.1016/j.apsusc.2018.01.169

IF: 6.7

2018-01-01

Applied Surface Science

Abstract:The Scandia doped thermionic cathodes have received great attention owing to their high electron emission density in past two decades. Here, Scandia doped Re3W matrix scandate (RS) cathodes are fabricated by using Sc2O3 doped Re3W powders that prepared by spray drying method. The micromorphology, surface composition and chemical states of RS cathode are investigated with various modern technologies. It reveals that the reduction temperature of RS powders is dramatically increased by Sc2O3. On the surface of RS cathode, a certain amount of Sc2O3 nanoparticles and barium salt submicron particles are observed. According to the in situ Auger electron spectroscopy analysis, the concentration ratio of Ba:Sc:O is determined to be 2.9:1.1:2.7. The X-ray photoelectron spectroscopy data indicates that low oxidation state of Sc is clearly observed in scandate cathodes. The high atomic ratio of Ba on RS cathode surface is suggested due to the high adsorption of Re3W to Ba. Moreover, RS cathode shows better adsorption to Sc by comparison with conventional tungsten matrix scandate cathode. For RS cathode, the main depletion of Sc is suggested to -OSc desorbing from RS cathode surface. RS cathode is expected to be an impressive thermionic cathode with good emission properties and ion anti-bombarding insensitivity. (C) 2018 Elsevier B.V. All rights reserved.
Study on Sc-type cathodes doped tungsten

Jinshu Wang,Siwu Tao,Yiman Wang,Hongyi Li,Jiuxing Zhang,Meiling Zhou

DOI: https://doi.org/10.3321/j.issn:1002-185x.2004.03.025

2004-01-01

Rare Metal Materials and Engineering

Abstract:Scandium oxide bodies doped tungsten have been made by both mechanical mixing scandium oxide with tungsten powder and scandate aqueous solution doping tungsten oxide. The distribution of scandium in the bodies and the anti-ion bombarding property of the Sc-type cathode have been studied by SEM and In Situ AES. For bodies made by aqueous solution-solid doping method, Sc2O3 distributed uniformly in the body. This structure is beneficial for diffusion and supplement of scandate to the suface. In Situ AES ion bombarding experimental results show that this kind of body has better anti-ionbombing property at high temperature.
Correlation Between Emission Behavior and Surface Features of Scandate Cathodes

Yiman Wang,Jinshu Wang,Wei Liu,Lili Li,Yanchun Wang,Xizhu Zhang

DOI: https://doi.org/10.1109/ted.2009.2015619

IF: 3.1

2009-01-01

IEEE Transactions on Electron Devices

Abstract:Special emission behaviors have been observed historically and recently on scandate cathodes. For a better understanding of the phenomena, we investigated the correlation between emission properties of scandia-doped dispenser cathodes and their surface features. The influence of external electric fields on the semiconductor layer of the cathodes is suggested to be mainly responsible for the special emission characteristics.
Investigation of Influence of Surface Activator Element on Scandate Cathodes Work Function

Xizhu Zhang,Jinshu Wang,Yiman Wang,Wei Liu

DOI: https://doi.org/10.1109/ivesc.2012.6264177

2012-01-01

Abstract:The surface analysis of scandate cathodes has revealed that active substances of Ba, Sc and O formed a layer on the surface of the cathodes. By using First-principles calculation method, the W and Ba-Sc-O-W systems were calculated to study the effect of active elements on the work function of the cathode.
A Review of Sc-containing "Scandate" Thermionic Cathodes

Mujan N. Seif,Qunfei Zhou,Xiaotao Liu,T. John Balk,Matthew J. Beck

DOI: https://doi.org/10.48550/arXiv.2202.04745

2022-02-09

Materials Science

Abstract:Although thermionic emission has been studied for more than 100 years, recent interest in novel electron devices for military and civilian use has led to a surge in demand for cathodes with enhanced emission properties (e.g. higher current density, more uniform emission, lower operating temperatures, or extended in-service longevity). Sc-containing "scandate" cathodes have been widely reported to exhibit superior emission properties compared to previous-generation thermionic cathodes, including oxide, B-, and M-type cathodes. Despite extensive study spanning several decades, the mechanism by which the addition of Sc enhances cathode emission remains ambiguous, and certain limitations -- non-uniform emission, low reproducibility, inconsistent longevity -- continue to prevent widespread commercial integration of scandate cathodes into electron devices. This review attempts to survey the literature to-date addressing the fabrication, structure, and properties of scandate cathodes, with particular attention to studies addressing the role of Sc in enhancing emission.
High current density Scandate doped pressed cathode fabrication

Cui, Y.T.,Wang, J.S.,Liu, W.,Wang, Y.M.

DOI: https://doi.org/10.1109/IVESC.2010.5644403

2010-01-01

Abstract:In this paper, scandate doped pressed (SDP) cathodes were prepared by a new method of spray drying combined with two-step hydrogen reduction, instead of traditional mechanical mixing of scandium oxide and barium-calcium aluminates with tungsten. The microstructure, element distribution, and emission properties of the cathodes have been characterized by scanning electron microscope, energy dispersive spectrometer, and an emission test system, respectively.
Emission Mechanism of High Current Density Scandia-Doped Dispenser Cathodes

Yiman Wang,Jinshu Wang,Wei Liu,Xizhu Zhang,Lili Li

DOI: https://doi.org/10.1116/1.3609251

2011-01-01

Abstract:The emission mechanism of scandia-doped dispenser (SDD) cathodes is characterized based on systematic investigation of microstructure, surface behavior, evaporation, and emission. High current density SDD cathodes have been developed in recent years to meet the requirements of advanced vacuum electron devices. Space charge limited current densities of over 100 A/cm2 have been reliably reached at a temperature of 950 °Cb. SDD cathodes are composed of a tungsten matrix with submicron structure and uniformly dispersed materials containing Sc, Ba, Ca, Al, and O as nanosized particulates in the matrix. The authors conclude that the copious electron emission from this cathode type results from a layer of Ba–Sc–O on W formed after activation on top of the matrix. This layer is about 100 nm thick and maintains a stable composition over its lifespan. Its emission can be explained in terms of a semiconductor layer with characteristics that differ from a metal-like emission model. The Ba–Sc–O layer is formed by codiffusion of Sc, Ba, and O (generated inside the W-matrix) to the surface of the W-matrix during activation. Furthermore, this layer guarantees a low evaporation rate of emission-relevant materials and thus enables a longer lifespan.
Scandia-doped Tungsten Bodies for Sc-type Cathodes

JS Wang,YM Wang,SW Tao,HY Li,JC Yang,ML Zhou

DOI: https://doi.org/10.1016/s0169-4332(03)00322-2

IF: 6.7

2003-01-01

Applied Surface Science

Abstract:We systematically investigated scandium oxide-doped (and with small amount of rhenium-doped) tungsten bodies for Scandate-type cathodes. Homogeneous microstructure and uniform distribution of scandia were found in these bodies. Sub-micron granular porous bodies with greatly uniformly dispersed scandia are obtained by sintering Sc2O3 and Re doped tungsten powder. Such bodies are thought to be beneficial for emission uniformity.For Scandate-type cathodes with such bodies, a slight decrease of scandia was observed by "in situ" AES analysis after ion sputtering, but it recovers completely on reheating. It is assumed that film-like Sc2O3 coating over tungsten grains but leaving porous areas for diffusion of barium to the surface leads to good emission properties and high resistance to ion bombardment. Reprocucibility has been proved for the body manufactering process. This offers the possibility of improving the performance of these cathodes in applications such as CRT's. (C) 2003 Published by Elsevier Science B.V.
Investigation on the Impact of Sr on Emission Property of Scandate Cathodes

Ruoqi Zhang,Xiaoxia Wang,Feng Ren,Shengyi Yin

DOI: https://doi.org/10.1109/ted.2024.3355380

IF: 3.1

2024-03-06

IEEE Transactions on Electron Devices

Abstract:Scandate cathodes have received widespread attention due to the high emission current density, existing results have shown that the content of strontium in impregnant has a certain degree of impact on the emission property of scandate cathodes. In this work, the mechanism by how strontium affects the emission property was investigated through experiments and theoretical analysis. Five precursor powders with different strontium element contents were prepared by freeze-drying method, and the impregnant was obtained after sintering. Then composition analysis was conducted on the impregnant and prepared experimental cathodes for emission performance testing, also the surface emission structure of cathode was established for density functional theory (DFT) calculations. The experimental results indicated that the variation in strontium content can alter the material composition of the impregnant and have impact on cathode emission performance. During the process of increasing strontium content from 0 to 12 atom%, the emission performance of the experimental cathodes increased first and then decreased. Under a testing temperature of 1100 , the cathodes with 6 atom% Sr have the highest emission current density of 34.9 A/cm2 at 260 V dc and 523.2 A/cm2 at 2000 V pulse voltage among the five experimental cathodes, and this cathode exhibits good emission uniformity. DFT results indicate that strontium does not directly participate in reducing the work function of cathode surface. It can be considered that strontium has a promoting effect on the formation of active substance, an appropriate amount of strontium promotes the formation of emitting active substance Ba2ScAl5 during the preparation process of the impregnant, thus promoting the improvement of cathode emission performance; while excessive strontium can lead to the generation of impurities that lower the emission performance of cathodes.

engineering, electrical & electronic,physics, applied
Performance of High Current Density Cathodes with Scandia Doped Tungsten Powders

Jinshu Wang,Yiman Wang,Wei Liu,Ke Zhang,Ji Li

DOI: https://doi.org/10.1109/IVELEC.2006.1666180

2006-01-01

Abstract:Development and performance of high current density cathodes with sub-micron scandia doped tungsten powders have been described in this paper
The Study of Thin Film High–voltage Li-Ion Cathodes to Reveal Surface Reactions and Coating Performance

Juchuan Li,Yoongu Kim,Chengdu Liang,Nancy J Dudney

DOI: https://doi.org/10.1149/ma2013-02/13/930

2013-01-01

ECS Meeting Abstracts

Abstract:The performance of high-voltage lithium intercalati on cathodes are limited because of reactions with the standard LiPF6 carbonate electrolytes and possibly changes in the crystalline lattice when charged to voltages above about 4.3V versus lithium. By using thin film s of the cathode materials, prepared by sputter depositi on processing, it becomes feasible to identify and stu dy reaction and degradation processes that are specifi c to the cathode compound. Further, the performance of vari ous protective coatings can be investigated with good c ntrol and variation of the coating thickness and coverage at the interface.
Investigation on Scadium Thin Films on Dispenser Cathodes

Junhao Sun,Junyan Gao,Yunfei Yang,Ruimin Zhang,Hexiong Liu,Jinshu Wang

DOI: https://doi.org/10.1109/ivec56627.2023.10157942

2023-01-01

Abstract:The emission performance and mechanism of Ba-W cathode coated with Sc film were studied. Results show that the cathode coated with Sc layer 200 nm in thickness shows better performance. After heat treatment at $\boldsymbol{1500 \ ^{\circ}} \mathbf{C}$ in hydrogen, the cathode could provide an emission current density of $\boldsymbol{21.07}\mathbf{A}/\mathbf{cm^{2}}$ at $\boldsymbol{1150\ ^{\circ}}\mathbf{C}_{\mathbf{b}}$ . The surface analysis shows that Sc is partially oxidized during heat treatment, indicating that oxidation improves performance. The experiment results are consistent with the DFT calculated results, where the work function of 25% O-25% Ba adsorbed on the Sc surface is the lowest, which is 1.4877 eV, 1.8228 eV and 1.8210 eV on the Sc (002), Sc (100) and Sc (101) respectively.
Growth and Faceting of Tungsten and Oxides in Scandate Cathode Particles during In Situ Heating in the Scanning Electron Microscope

Huanhuan Bai,Thomas John Balk

DOI: https://doi.org/10.3390/cryst14100840

IF: 2.7

2024-09-27

Crystals

Abstract:Tungsten-based scandate dispenser cathodes are promising next-generation thermionic electron sources for vacuum electron devices, due to their excellent emission performance at temperatures lower than those required for conventional cathodes. There has been a significant recent effort to understand scandate cathode performance and to characterize the tungsten and other materials on the emitting surface, primarily via the study of cathodes before and after emission testing. Moreover, these scandate cathodes have typically been characterized at room temperature only. In situ observations of scandate cathodes is challenging, as these devices are thermionic emitters that operate in a high-vacuum environment, and because the sizes of relevant material features range from the micron (2.0 μm) to the nanometer (<50 nm diameter) length scales. In the current study, a series of in situ heating experiments was conducted on un-activated impregnated scandate cathode fragments, utilizing a micro-electro-mechanical system-based heater chip in a scanning electron microscope, enabling the real-time observation of cathode material evolution at elevated temperature (up to 1200 °C) under a pressure of 10−6 to 10−7 mbar. This study revealed how impregnant materials grow and migrate within the cathode matrix at elevated temperatures, and these observations are key to a thorough understanding of the behavior of scandate cathode materials. It also enabled direct observation of the incipient faceting of tungsten surfaces at high temperature while surrounded by impregnant materials. These are the first in situ observations of scandate cathode material evolution in relevant environmental conditions and at sufficiently high resolution to provide insights into the morphological and phase changes that occur in the near-surface regions of scandate cathodes.

materials science, multidisciplinary,crystallography

XRD analysis of scandate cathodes

Advances in Scandate Cathode

Study of surface nano-particles of scandate cathodes

Development of scandate cathode and its prospect_ a review

Characterization of Scandate Cathode Emission

Surface characteristics of scandate dispenser cathodes during life

A Study of Scandia-Doped Pressed Cathodes

A review on scandia doped tungsten matrix scandate cathode

Preparation and Surface Characteristics of Re3W Matrix Scandate Cathode: an Experimental and Theoretical Study

Study on Sc-type cathodes doped tungsten

Correlation Between Emission Behavior and Surface Features of Scandate Cathodes

Investigation of Influence of Surface Activator Element on Scandate Cathodes Work Function

A Review of Sc-containing "Scandate" Thermionic Cathodes

High current density Scandate doped pressed cathode fabrication

Emission Mechanism of High Current Density Scandia-Doped Dispenser Cathodes

Scandia-doped Tungsten Bodies for Sc-type Cathodes

Investigation on the Impact of Sr on Emission Property of Scandate Cathodes

Performance of High Current Density Cathodes with Scandia Doped Tungsten Powders

The Study of Thin Film High–voltage Li-Ion Cathodes to Reveal Surface Reactions and Coating Performance

Investigation on Scadium Thin Films on Dispenser Cathodes

Growth and Faceting of Tungsten and Oxides in Scandate Cathode Particles during In Situ Heating in the Scanning Electron Microscope