Abstract:The heat partition coefficient between two finite thickness contact discs during long-time sliding is studied with a coupled finite element method. Results show that the heat partition coefficient varies from its initial value to another steady state value rapidly instead of being a constant all the time. An analytical solution of the temperature field under invariant heat flux input is deduced, which tells that there exists a unique critical thickness ratio between the contact discs that keeps the heat partition coefficient a constant. An equivalent method for single-material contact bodies is proposed that is capable of calculating the steady state heat partition coefficient for any thickness ratio. It reveals that the steady state heat partition coefficient only has relationship with the mass density and the heat capacity of the materials and the thickness ratio. Based on this method, a two-step material equivalent method is further proposed for the contact discs that have friction linings on them. The solution shows that the steady state heat partition coefficient in this situation is also only determined by the material properties and the layer thicknesses. A test bench of multi-disc clutch is set up and a series of sliding experiments are conducted to validate the proposed equivalent methods and solutions of steady state heat partition coefficient. The measured experimental temperature variations show that the temperature level of the separator disc in the clutch is overestimated with the constant heat partition coefficient of semi-infinite model, while it is close to those calculated results with steady state heat partition coefficient. Therefore, the temperature fields of the contact discs during long-time sliding with constant speed can be figured out efficiently using the steady state heat partition coefficient with only small error, and these equivalent methods benefit the multi-disc clutch design and temperature estimation in practical applications.

Finite Element Analysis of Temperature Field of Clutch in Tunnel Boring Machine

Finite Element Analysis for Temperature Field of Clutches Based on B-spline Wavelet

Prediction of the Temperature on AMT Clutch-disc Surface Based on LS-SVM

Heat Analysis of Sliding Abrasive Particle Micro Contact Process by Finite Element Method

Numerical and Experimental Research on Engagement Process of Wet Multi-Plate Friction Clutches with Groove Consideration

Finite Element Analysis of Spindle Thermal Character Based on Thermal Contact Resistance

Influence upon temperature field distribution with straight grooves parameters of clutch friction disk

FINITE ELEMENT ANALYSIS OF THE THERMAL BEHAVIOUR OF SINGLE-DISC CLUTCHES DURING REPEATED ENGAGEMENTS

Transient temperature characteristics of friction clutch disc considering thermal contact conductance under sliding conditions

Temperature Field Characteristics of Limited Slip Clutch under Various Condition Parameters

Simulation of the Friction Temperature Field for Disc Brake

Investigation of thermal behavior of a novel multi-conical friction pair during wet clutch's engagement based on finite difference method

Analytical Model and Material Equivalent Methods for Steady State Heat Partition Coefficient Between Two Contact Discs in Multi-Disc Clutch

Tribo-thermal simulation study of AMT dry clutch assembly under the continuous sliding grinding condition

Temperature Analysis of Wet Clutch' Friction Pair Considering Axial Pressure Attenuation Effect

A temperature field model based on energy flow analysis of wet clutch sliding interface

An Analysis on the Thermoelastic Instability of Wet Multi-disc Clutch

A Simulation Study of the Temperature Field of A DCT Under the Frequent Shifting Condition

The performance of Cu-based friction material in dry clutch engagement

Sliding State Analysis of Fractal Rough Interface Based on the Finite Element Method

FINITE ELEMENT ANALYSIS OF HYDRATION HEAT TEMPERATURE FIELD IN CONCRETE FOUNDATION OF TONGBAI POWER STATION