Abstract:A high ratio (winding ratio of 1:80) pulse transformer with a modular ferrite core was developed for a repetitive resonant charging system. The magnetic core is constructed from 68 small blocks of ferrites, glued together by epoxy resin. This allows a high degree of freedom in choosing core shape and size. Critical issues related to this modular design are the size tolerance of the individual ferrite blocks, the unavoidable air gap between the blocks, and the saturation of the core. To evaluate the swing of the flux density inside the core during the charging process, an equivalent circuit model was introduced. It was found that when a transformer is used in a resonant charging circuit, the minimal required volume of the magnetic material to keep the core unsaturated depends on the coupling coefficient of the transformer and is independent of the number of turns of the primary winding. Along the flux path, 17 small air gaps are present due to the inevitable joints between the ferrite blocks. The total air gap distance is about 0.67 mm. The primary and secondary windings have 16 turns and 1280 turns, respectively, and the actually obtained ratio is about 1:75.4. A coupling coefficient of 99.6% was obtained. Experimental results are in good agreement with the model, and the modular ferrite core works well. Using this transformer, the high-voltage capacitors can be charged up to more than 70 kV from a low-voltage capacitor with an initial charging voltage of about 965 V. With 26.9 J energy transfer, the increased flux density inside the core was about 0.23 T, and the core remains unsaturated. The energy transfer efficiency from the primary to the secondary was around 92%.

Design of a cascade planar transformer for electrostatic precipitator use

A High-Voltage Pulse Transformer with a Modular Ferrite Core.

A novel PCB winding transformer with controllable leakage integration for a 6.6kW 500kHz high efficiency high density bi-directional on-board charger

High-Frequency High-Density Bidirectional EV Charger

High Power Density 48–12 V DCX with 3-D PCB Winding Transformer

A High Power Density 48V-12V DCX with 3-D PCB Winding Transformer

A WBG based three phase 12.5 kW 500 kHz CLLC resonant converter with integrated PCB winding transformer

Design and Optimization of High Insulation Voltage Planar Transformer for DC-DC Converters

Design of Compact Transmission Line Transformer for High Voltage Nanosecond Pulses

Effects of high-voltage power sources on fine particle collection efficiency with an industrial electrostatic precipitator

A Symmetrical Resonant Converter and PCB Transformer Structure for Common Mode Noise Reduction

Design of a High-Voltage-Insulation and High-Efficiency Medium Frequency Transformer

Modeling and Design of a Medium Frequency Transformer with High Isolation and High Power-Density

Analysis and Comparison of Integrated Planar Transformers for 22-kW On-Board Chargers

High Efficiency High Power Density Cellular 1mhz 380V-12V DCX for Future Data Centers

Optimizing Design and Simulation of Planar Transformers Based on Integrated Software Platform

A 1.8kw/in3 Power Density Cellular 380V-12V DCX with 98.4% Peak Efficiency Using Low NFoM Devices and Resonant Drive Transformer

Analysis and enhancement of high voltage insulation for planar transformer

High-Density Planar Integrated Magnetics with Two-Sided Merged Inductor Windings and Integrated Cores for Resonant DC/DC Converter

Development of Multi-Domain Design Tool for Medium Voltage High Frequency Power Transformers

Design and Electromagnetic Analysis of Hybrid Megawatt High Temperature Superconducting Transformer