Abstract:Greenhouse effect has become a huge challenge for the sustainable development of the world. It is well known that CO2 is the major greenhouse gas that contributes to global warming more than 60%, resulting in the urgent demand to reduce the CO2 emission. Currently, post-combustion CO2 capture is a promising choice in the near-to middle-term, since it can be retrofitted to the existing power plants. Chemical absorption is generally recognized as the most mature technology for industrial application, and monoethanolamine (MEA) is the most widely used absorbent. Conventional MEA absorption process suffers from high energy consumption due to its immense steam consumption in the regeneration process, leading to the extremely high operating cost for industrial application. To reduce the high cost of chemical absorption, researches tried to improve the typical CO2 absorption process in several aspects like exploring new absorbents, improving absorbing equipment and strengthening the process. Numerous studies have been carried out on the improvement of MEA absorption in packed columns and a vast number of meaningful conclusions have been obtained. But it is not yet fully developed for application and may not be economically competitive. Packed columns generally suffer from high gas-phase pressure drop, liquid channeling and flooding, deposition onto the packing material and so on. To avoid these problems, researchers proposed a type of spray towers with no solid packing material inside and the absorbing solution is sprayed as fine droplets for absorption. Since the spray towers are empty columns, there will be a lower pressure drop for the gas flow and a wider range of gas to liquid loading ratios compared to the traditional packed columns. In addition, with the simpler structure compared with typical packed columns, the spray towers cost less for construction and maintenance. The application of spray towers for CO2 capture is a development trend in recent years. However, most of the previous jobs were conducted in a cylindrical tower by using a single spray nozzle, whose configuration and performance is not good enough for industrial application. Furthermore,

Experimental studies on CO2 capture in a spray scrubber using NaOH solution

Experimental Studies on Removal of Carbon Dioxide by Aqueous Ammonia Fine Spray

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

Experimental Study on Absorption of Carbon Dioxide in Flue Gas by Monoethanolamine Fine Spray

Comparison of Removal Efficiencies of Carbon Dioxide Between Aqueous Ammonia and NaOH Solution in a Fine Spray Column

Performance and mechanism of CO2 absorption during the simultaneous removal of SO2 and NO by wet scrubbing process

Experimental Study on Volumetric Mass Transfer Coefficients for CO2 Removel from Polluted Air into Aqueous Solution of NaOH in a Rotating-stream-tray Scrubber

Experimental study on the influence of SO2 on the CO2 capture process

Experimental Investigation of Nitric Oxide Removal from Flue Gas Using Hexamminecobalt(ii) Solution Scrubbing in a Pilot-Scale Facility

Research Progress of Aqueous Amine Solution for CO2 Capture: A Review

Experimental study of CO 2 absorption in a diameter-varying spray tower

Experimental and Numerical Study on CO2 Absorption Mass Transfer Enhancement for a Diameter-Varying Spray Tower

Experimental Study on the Temperature Impacts on the CO2 & SO2 Removing Efficiency by Ammonia Gas Scrubbing

Experimental Studies And Rate-Based Process Simulations Of Co2 Absorption With Aqueous Ammonia Solutions

The use of nanoparticles for high-efficiency CO2 capture by methanol

Comparison of Capture Efficiencies of Carbon Dioxide by Fine Spray of Aqueous Ammonia and MEA Solution

Co2 Absorption/Desorption Enhanced By Nanoparticles In Post-Combustion Co2 Capture

Experimental Studies on Absorption and Regeneration Performance of Compound Amine Sulphone Solvents on CO2, SO2 and NOx Capture

A novel ionic liquids-based scrubbing process for efficient CO 2 capture

CFD investigation of post-combustion CO 2 capture using an industrial spray tower: Regulation effects of spray schemes

Numerical Studies for the Co2 Capture Process in A Fluidized-Bed Absorber