Abstract:Rotating heat pipe has a broad application prospect for the heat dissipation of high-speed rotation machineries. In order to realize the numerical simulation of a loop rotating heat pipe with two bended structure, which aims to cool the shaft of the high-speed motorized spindle, the Volume of Fluid (VOF) method combined with the Lee phase change model is adopted and the conjugate heat transfer between the fluid and the solid region is considered in this paper. The effects of heating power and rotation speed on flow behavior and heat transfer characteristics have been studied. Detailed evaporation and condensation phenomena are captured by simulation results. The results show that the centrifugal force has an inhibition effect on bubbles growth. Meanwhile, the increase of rotation speed enhances the convective heat transfer in the evaporator and speeds up the reflux of the condensing film and reduces the liquid film thickness in the condenser. The thermal performance of the loop rotating heat pipe is improved with the increase of rotation speed. When the rotation speed increases from 2000 rpm to 6000 rpm and 10,000 rpm, the overall thermal resistance is reduced by 30.0% and 36.8%, respectively. The overall thermal resistance is also reduced with the increase of heating power. When the heating power increases from 30 W to 120 W and 200 W, the overall thermal resistance is reduced by 31.0% and 37.0%, respectively. However, the temperature difference between the evaporator and the condenser increases with the increase of heating power while it decreases with the increase of rotation speed.

Numerical Study on Viscous Heating of Oil Flow in a Spool Valve

An Investigation of the Temperature Distributions Inside A Spool Valve Owing to A Viscous Heating Effect

Numerical Study On Temperature Field And Spool Deformation Of Throttle Slide Valve With V-Notches

Evaluation of the Viscous Heating Induced Jam Fault of Valve Spool by Fluid–structure Coupled Simulations

Numerical Investigation of Cavitation Flow Inside Spool Valve with Large Pressure Drop

Numerical simulation of 3-D turbulent flows in a cut-off valve and analysis of flow characteristics in pipe

Numerical Study on the Axial Flow Force of a Spool Valve

Numerical simulation of flow and heat transfer in journal bearing lubrication

Investigation into pressure distribution of spool value with notches

Noise Properties in Spool Valves with Cavitating Flow

Numerical investigations of the influences of valve spool structure on the eccentric jet flow characteristic in high-pressure angle valves

NUMERICAL AND EXPERIMENTAL INVESTIGATION OF CAVITATING FLOW IN OIL

The Acoustics Of Cavitation In Spool Valve With U-Notches

Study on Steady Flow Force of Inlet Throttling Spool Valve Based on CFD

Numerical Simulation on Fluid Dynamic Behavior of High-pressure Safety Valves

Numerical simulation of the temperature rise and cavitation flow in a hydraulic slide valve

Numerical study on two-phase flow and heat transfer characteristics of loop rotating heat pipe for cooling motorized spindle

Two-phase flow-based numerical investigation of the temperature maps of sodium-cooled exhaust valves in a turbocharged engine

Numerical Investigation of Flow and Heat Transfer Characteristics of Subcooled Boiling in a Single Rod Channel With/without Spacer Grid

Cfd Investigating the Effects of Different Mixing Vane Designs on the Localized Thermal-Hydraulic Characteristics in the Rod Bundles with Grid Spacer

Numerical Investigation On The Flow And Heat Transfer Characteristics Of The Superheated Steam In The Wedge Duct With Pin-Fins