Abstract:We present a new asynchronous quasi-delay-insensitive (QDI) block carry lookahead adder with redundancy carry (BCLARC) realized using delay-insensitive dual-rail data encoding and 4-phase return-to-zero (RTZ) and 4-phase return-to-one (RTO) handshaking. The proposed QDI BCLARC is found to be faster and energy-efficient than the existing asynchronous adders which are QDI and non-QDI (i.e., relative-timed). Compared to existing asynchronous adders corresponding to various architectures such as ripple carry adder (RCA), conventional carry lookahead adder (CCLA), carry select adder (CSLA), BCLARC, and hybrid BCLARC-RCA, the proposed BCLARC is found to be faster and more energy-optimised. The cycle time (CT), which is the sum of forward and reverse latencies, governs the speed; and the product of average power dissipation and cycle time viz. the power-cycle time product (PCTP) defines the low power/energy efficiency. For a 32-bit addition, the proposed QDI BCLARC achieves the following average reductions in design metrics over its counterparts when considering RTZ and RTO handshaking: i) 20.5% and 19.6% reductions in CT and PCTP respectively compared to an optimum QDI early output RCA, ii) 16.5% and 15.8% reductions in CT and PCTP respectively compared to an optimum relative-timed RCA, iii) 32.9% and 35.9% reductions in CT and PCTP respectively compared to an optimum uniform input-partitioned QDI early output CSLA, iv) 47.5% and 47.2% reductions in CT and PCTP respectively compared to an optimum QDI early output CCLA, v) 14.2% and 27.3% reductions in CT and PCTP respectively compared to an optimum QDI early output BCLARC, and vi) 12.2% and 11.6% reductions in CT and PCTP respectively compared to an optimum QDI early output hybrid BCLARC-RCA. The adders were implemented using a 32/28nm CMOS technology.

High-Performance Carry Select Adder Using Fast All-One Finding Logic

A High-Speed Carry-Select Adder with Optimized Block Sizes

Optimal Design of Carry-select Compound Adder in Floating-point ALU

Efficient VLSI Design of Modulo 2N-1 Adder Using Hybrid Carry Selection

Performance Analysis of High Speed and Low Power Binary Adders

A New Carry Look-Ahead Adder Architecture Optimized for Speed and Energy

Optimized Design on Carry Look-ahead Adder

Fast Bipartitioned Hybrid Adder Utilizing Carry Select and Carry Lookahead Logic

Design of multi-stage latency adders using detection and sequence-dependence between successive calculations

Design and analysis of 1-bit hybrid full adder cells for fast computation

Low power, less area, and highly efficient hybrid 1-bit full adder

Speed and Energy Optimised Quasi-Delay-Insensitive Block Carry Lookahead Adder

Efficient quantum-dot adder optimisation and analysis for future circuits

A Novel Implementation of 4-Bit Carry Look-Ahead Adder

A delay efficient hybrid parallel prefix variable latency CSKA based multi-operand adder with optimized 5:2 compressor and skip logic

Performance Comparison of some Synchronous Adders

Optimized Carry Lookahead Adders with Direct Feeding

A parallel feedback carry adder based on half adder

Modular design of QCA carry flow adders and multiplier with reduced wire crossing and number of logic gates

Area/latency optimized early output asynchronous full adders and relative-timed ripple carry adders

A New Adder Theory Based on Half Adder and Implementation in COMS Gates