Abstract:Abstract: Today's high-performance processor is built with arithmetic logic units that add and subtract key components. Design considerations related to low power and high performance digital VLSI circuits have become more prevalent in today's world. In order to develop low-power and high-performance processors, the designers need to design their adder circuits with the required speed and power dissipation for their applications. This topic introduces the concept of a adder using MGDI Technique. The Exact Speculative Carry Look Ahead Adder the use of the Modified-GDI (Modified-Gate Diffusion Input) is cautioned in this work. The delay, location and energy trade off performs a integral role in VLSI. We already comprehend that designs which are of CMOS fashion occupy extra area might also eat extra strength consumption. The switching conduct of the circuit reason the heating up of integrated circuits affects the working stipulations of the purposeful unit. The adders are the most important parts of countless applications such as microprocessors, microcontrollers and digital signal processors and additionally in actual time applications. Hence it is necessary to minimize the adder blocks to format a perfect processor. This work is proposed on a 16 bit carry seem to be in advance adder is designed through using MGDI gate and 4T XOR gates and a speculator blocks. The proposed MGDI raise Look Ahead adder occupies 68% much less region and the strength consumption and the propagation extend additionally considerably reduces when in contrast to the traditional carry Look Ahead adder why because the variety transistors extensively reduces from 1448 (Conventional) to 456 (Proposed CLA). The simulation consequences of the proposed format carried out in Xilinx. Keywords: Delay, power dissipation, voltage, transistor sizing.

A delay efficient hybrid parallel prefix variable latency CSKA based multi-operand adder with optimized 5:2 compressor and skip logic

Design of Delay Efficient Hybrid Adder for High Speed Applications

Design of High-Speed Area-Efficient VLSI Architecture of 32-Bit Three-Operand Binary Adder

A New Implementation of 16-bit Parallel Prefix Adder for High Speed and Low Area.

Design Of Variable Latency Adder Based On Present And Transitional States Prediction

Optimized Carry Lookahead Adders with Direct Feeding

Low power, less area, and highly efficient hybrid 1-bit full adder

A High-Speed Carry-Select Adder with Optimized Block Sizes

Design of Synchronous Section-Carry Based Carry Lookahead Adders with Improved Figure of Merit

A New Carry Look-Ahead Adder Architecture Optimized for Speed and Energy

An Algorithmic Approach for Generic Parallel Adders

Efficient modular hybrid adders and Radix-4 booth multipliers for DSP applications

Fast Prefix Adders for Non-Uniform Input Arrival Times

APPAs: fast and efficient approximate parallel prefix adders and multipliers

4-bit Carry Look Ahead Adder Using MGDI Technique

8×8 Bit Pipelined Dadda Multiplier in CMOS

Asynchronous Early Output Section-Carry Based Carry Lookahead Adder with Alias Carry Logic

Design of efficient binary multiplier architecture using hybrid compressor with FPGA implementation

Design of Low Power 64-Bit Hybrid Full Adder

Speed and Energy Optimised Quasi-Delay-Insensitive Block Carry Lookahead Adder

Design of multi-stage latency adders using detection and sequence-dependence between successive calculations