Abstract:Abstract: Adders are one of the most widely used digital components in digital integrated circuit design. With the advances in technology, the design that offers either high speed, low power consumption, less area, or a combination of them is designed. There are various processes performed by the digital circuits among which arithmetic operations are prominent. Three-operand binary adder is the basic functional unit to perform the modular arithmetic in various cryptography and pseudorandom bit generator (PRBG) algorithms. Carry save adder (CS3A) is the widely used technique to perform the three-operand addition. However, the ripple carry stage in the CS3A leads to a high propagation delay. Moreover, a parallel prefix two-operand adder such as Han-Carlson (HCA) can also be used for three-operand addition, significantly reducing the critical path delay at the cost of additional hardware. Hence, a new high-speed and area-efficient adder architecture is designed using pre-compute bitwise addition followed by carry prefix computation logic to perform the three-operand binary addition that consumes substantially less area, low power, and drastically reduces the adder delay. To design a faster computing system with less hardware we require some other architecture. The proposed architecture will reduce the area as well as the delay by replacing the Han-Carlson adder with the Ladner fisher adder in a Highspeed area-efficient three-operand binary adder. The proposed architecture is synthesized with the zynq-7000 library. The proposed architecture reduces the LUT count and delay by 20 and 0.4 nanoseconds respectively. By using these synthesis results, we noted the performance parameters like the number of LUTs and delay. We compared the adders in terms of LUTs (represents area) and delay value

Optimal Design of Carry-select Compound Adder in Floating-point ALU

A High-Speed Carry-Select Adder with Optimized Block Sizes

Design of Adder Based on Abacus Algorithm

An Improvement on Carry Chain of Conditional Carry Selection

Modular design of QCA carry flow adders and multiplier with reduced wire crossing and number of logic gates

Optimized Carry Lookahead Adders with Direct Feeding

A delay efficient hybrid parallel prefix variable latency CSKA based multi-operand adder with optimized 5:2 compressor and skip logic

Design of a high-efficient MSD adder

An Algorithmic Approach for Generic Parallel Adders

Design of Synchronous Section-Carry Based Carry Lookahead Adders with Improved Figure of Merit

Architecture Optimization of ALU

Design of multi-stage latency adders using detection and sequence-dependence between successive calculations

A parallel feedback carry adder based on half adder

Design of High-Speed Area-Efficient VLSI Architecture of 32-Bit Three-Operand Binary Adder

Design Of Variable Latency Adder Based On Present And Transitional States Prediction

Design of low power CMOS ternary 4-input full adder and its application

Design of low-power and high-speed multiplier

Design of Delay Efficient Hybrid Adder for High Speed Applications

Performance Analysis of High Speed and Low Power Binary Adders

Field Programmable Gate Array Prototyping of End-Around Carry Parallel Prefix Tree Architectures

Design and analysis of sum-prediction adder