Abstract:In order to study the ultimate span of a concrete-filled steel tube (CFST) arch bridge, taking the structural strength, stiffness, and stability as the limiting conditions, the finite element analysis method is adopted to carry out research on the influence law of a single parameter of the pipe diameter, wall thickness, and cross-section height on the ultimate span of the arch axial shape. The result is used as a sample point to determine the ultimate span of the CFST arch bridge under multifactor coupling based on the response surface method. The finite element method is used to check the strength, stiffness, stability, number of segments and maximum lifting weight, steel content rate, and steel pipe concrete constraint effect coefficient of the CFST arch bridge under the ultimate span diameter. The results show that, when analyzed using a single parameter, the ultimate span diameter of the CFST arch bridge increases with the increase in the steel pipe diameter and the cross-section height, and then decreases. Moreover, it increases with the increase in the wall thickness of the steel pipe, and the CFST arch bridge reaches the ultimate span with the increase in the steel pipe wall thickness. When the pipe diameter is 1.38 m, the CFST arch bridge reaches the ultimate span; according to a multi-parameter coupling analysis, when the pipe diameter is 1.49 m, wall thickness is 37 mm, and cross-section height is 17 m, the CFST arch bridge reaches the ultimate span of 821 m, which meets all of the limiting conditions, and, at this point, the arch axial coefficient is 1.2. The results of the finite element calculation show that the structural strength, prior to the stiffness, stability, and other limitations, just reaches the critical value of the limiting conditions.

Ultimate Load Carrying Capacity of Long-Span Steel Arch Bridges

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

Test Study on Bearing Capacity of a New Steel-concrete Composite Arch

Ultimate behavior of long-span steel arch bridges

Study on FE Models in Elasto-Plastic Seismic Performance Evaluation of Steel Arch Bridge

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Study on Space Stress Characteristic and Carrying Capacity of Butterfly Arch

Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Damage Characteristics of Thin-Walled Steel Arch Bridges Subjected to In-Plane Earthquake Action

Parametric Study of In-Plane Ultimate Bearing Capacity of CFST Truss Rib Arch Bridge

State and Development of Ultimate Load Carrying Capacity of Arch Bridges

STUDY FOR IN-PLANE ULTIMATE STRENGTH OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORTS

Ultimate Load Carrying Capacity of the Lupu Steel Arch Bridge under Static Wind Loads

A Study on the Ultimate Span of a Concrete-Filled Steel Tube Arch Bridge

Wind-induced Load Capacity Analysis and Parametric Study of a Long-Span Steel Arch Bridge under Construction

Stress Performance Analysis of Special-shaped Arch Bridge with Longitudinal Linkage

Study on Ultra‐low Cycle Fatigue Fracture of Thick‐walled Steel Bridge Piers

A Long-span Network Arch Bridge for Road and Rail Traffic

The Analysis of the Bearing Capacity of Hoisting Stand Used in Long-Span Steel Truss Arched Bridge

Analysis on ultimate load-bearing capacity of large-span half-through CFST arch bridge