Abstract:To study the evolution of stress on the ring and segment interfaces during the construction process of the concrete encapsulation of the main arch ring in a rigid-frame arch bridge, alongside its impact on the ultimate load-bearing capacity of the main arch ring, a 1:10 scale model experiment was conducted by taking the 600 m Tian'e Longtan Bridge as the prototype. The key cross-section concrete strain data were collected during the entire construction process of the main arch ring via fiber-optic strain sensors, which were used to investigate the stress evolution at ring and segment interfaces. ANSYS APDL was employed to simulate the ultimate bearing capacity under various loading conditions of two different finite element models, which were, respectively, formed segmentally and by single pouring. The results revealed that (1) after the closure of the concrete encapsulation of the main arch ring, the concrete stress in the cross-section exhibits significant stress disparities. At the same cross-section, the level of the web concrete stress can reach 76% of the floor concrete stress, while the roof concrete stress level is less than 20% of the floor concrete stress. (2) At the junction of two adjacent work planes, there are considerable differences in the stress levels of the concrete on both sides. After the closure of the main arch ring, the intersegment stress ratios of the floor, web, and roof concrete are 60~70%, 40~60%, and 0~5%, respectively. (3) Loading conditions remarkably affected the ultimate bearing capacity of the main arch ring. Under mid-span loading and 1/4 span symmetrical loading conditions, compared to single-pour concrete encapsulation, the ultimate bearing capacity of the main arch ring with concrete encapsulated by segmented and ring-divided pouring decreased by 19.16% and 5.23%, respectively, compared to single-pour concrete encapsulation. This suggests that the non-uniformity of stress distribution in the concrete sheath can lead to reductions in the ultimate bearing capacity of the arch ring.

State and Development of Ultimate Load Carrying Capacity of Arch Bridges

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

Study on Space Stress Characteristic and Carrying Capacity of Butterfly Arch

Ultimate Load Carrying Capacity of Long-Span Steel Arch Bridges

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Ultimate behavior of long-span steel arch bridges

STUDY FOR IN-PLANE ULTIMATE STRENGTH OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORTS

THEORETICAL STUDY ON THE IMPACT FACTOR OF CRESCENT-SHAPED MULTI-RIB CONCRETE FILLED STEEL TUBE TRUSS ARCH BRIDGES

Multi-rib Arch Bridge Strengthened by Stayed-Cable and Field Test

Reinforced Concrete Multi-Rib Arch Bridge Strengthened by Changing Structural System

Maintenance strategy and method of concrete arch bridges in life cycle i: performance levels and performance requirements

Stress Performance Analysis of Special-shaped Arch Bridge with Longitudinal Linkage

Analysis of the Existing Reinforced Concrete Rigid Frame Arch Bridge Strengthened with Arch and Cable System

A Long-span Network Arch Bridge for Road and Rail Traffic

Ultimate Load Carrying Capacity of the Lupu Steel Arch Bridge under Static Wind Loads

Research on Hanger Force and Main Arch Stability of Long-Span Concrete-Filled Steel Tube Arch Bridge

Maintenance strategy and method of concrete arch bridges in life cycle ii: performance degradation analysis and repair reinforcement methods

A Study on the Ultimate Span of a Concrete-Filled Steel Tube Arch Bridge

Evolution Law of Concrete Interface Stress of Rigid-Frame Arch under Construction and Its Impact on Ultimate Load-Bearing Capacity

Study and Analysis of Strengthening Double-arched Stone Spandrel Arch Bridge by Composite Main Arch Circle Method

CONSTRUCTION VERIFICATION OF UNDER-BEARING ARCH BRIDGE BASED ON CONSTRUCTION MONITORING AND TEST