Abstract:In recent years, the construction of a CFST arch bridge has developed rapidly; however, as a kind of structural system dominated by compression, with the increase of material strength and span, the stability of the main arch of the CFST arch bridge has become more and more important. In this paper, the finite element method is used to analyze the hanger force and the main arch stability of the long-span CFST arch bridge. Combined with the Shenzhen Rainbow Bridge project, the axial force of the hanger, the internal force, and stability of the main arch of the arch bridge are studied. In the establishment of the finite element model, considering the actual operation of the arch bridge, the model simulates the interaction between steel pipe and concrete, it studies the large deformation of CFST arch bridges, and the stress distribution and overall stability of the arch bridge are analyzed. The results show that the main deformation of the CFST arch bridge is the vertical displacement of the deck, and the axial force of most members of the upper arch ribs is greater than that of the lower arch ribs. The axial force and bending moment of the lower arch rib near the arch foot are larger, and the compressive stress of the arch foot is greater than that of other positions. The axial force of the suspender of the arch bridge is the largest at both ends of the hanger and the middle hanger, and the axial force of the other hanger is close to each other, and the axial force changes little under the same case. The buckling modes of the arch are mainly the lateral buckling or flexural buckling of the arch rib outside the plane, which indicates that the vertical stiffness of the arch bridge structure is larger than that of the transverse stiffness. The research results make the load-bearing mechanism of the CFST arch bridge more clear and also provide a certain reference for the design and construction of the CFST arch bridge.

Study on Space Stress Characteristic and Carrying Capacity of Butterfly Arch

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Damage Characteristics of Thin-Walled Steel Arch Bridges Subjected to In-Plane Earthquake Action

Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

Comparison Study on Stability Behavior Between Steel Pipe Arch Bridge and CFST Truss Arch Bridge

Impact Factor Characteristics Of Double Parabolic Arch Ribs In A Cfst Arch Bridge Due To Vehicle Loads

STUDY FOR IN-PLANE ULTIMATE STRENGTH OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORTS

Parametric Study of In-Plane Ultimate Bearing Capacity of CFST Truss Rib Arch Bridge

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

THEORETICAL STUDY ON THE IMPACT FACTOR OF CRESCENT-SHAPED MULTI-RIB CONCRETE FILLED STEEL TUBE TRUSS ARCH BRIDGES

Elastic-plastic Stability of Shear-Deformable Circular Arches

IN-PLANE ELASTIC BUCKLING OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORT

Stress Performance Analysis of Special-shaped Arch Bridge with Longitudinal Linkage

Elastic and Inelastic Stability of a Steel Arch Subjected to a Crown Point Load under an Elevated Fire Environment

Research on Hanger Force and Main Arch Stability of Long-Span Concrete-Filled Steel Tube Arch Bridge

Research on the Mechanical Performance of a Mountainous Long-Span Steel Truss Arch Bridge with High and Low Arch Seats

Experimental Study on In-Plane Stability of Welded I-section Steel Parabolic Arches

Static and dynamic evaluation of a butterfly-shaped concrete-filled steel tube arch bridge through numerical analysis and field tests

Model Experiment and Finite Element Analysis for the Stresses on the Structure of Arch Foot