Abstract:Nanocomposite permanent magnets can achieve excellent magnetic properties due to the hardening of a soft phase by hard phase within the length of exchange coupling. The performance of exchange coupling nano-composite magnets can be optimized through the design of appropriate microstructure by micromagnetic modeling. In this study, we performed a micromagnetic simulation for isotropic exchange coupling nano-composite Nd2Fe14B/alpha-Fe permanent magnet in which grain sizes and volume fractions of magnetically hard Nd2Fe14B phase and soft alpha-Fe phase vary independently, ranging in grain size from 5 nm to 40 nm and in the volume fraction of alpha-Fe from 10% to 60%. When the grain size of the hard phase is 5 nm, and that of the soft phase is 10 nm, respectively, with the volume fraction of the soft phase of 30%, the highest (BH)(max) of 197 kJ/m(3) can be reached. Furthermore, considering the effects of the grain sizes of the hard and soft phases, we suggest that the grain size of the hard phase plays a more critical role in enhancing maximum energy product (BH)(max). The micromagnetic modeling with the variation of grain size and volume faction has been performed with a grain boundary (GB) phase. It was found that when the thickness of the GB phase is very small (similar to 1nm), there is little difference between the simulated results with the GB phase and without GB phase. On the other hand, the coercivities and (BH)(max) decrease significantly due to the increase of soft phase when the thickness of GB phase is 5 nm.

Exchange Coupled Nd2Fe14B/α-Fe Nanocomposite Magnets with Fine Α-Fe Grains

Exchange coupled Nd2Fe14B/alpha-Fe nanocomposite magnets with fine alpha-Fe grains obtained by low wheel speed spinning

Fe65B22Nd9Mo4 bulk nanocomposite permanent magnets produced by crystallizing amorphous precursors

Novel Exchange-Coupled SmFe3/α-Fe Nanocomposite Magnets Fabricated by Magnetic Annealing

Effect of wheel speed and subsequent annealing on the microstructure and magnetic properties of nanocomposite Pr2Fe14B/α-Fe magnets

Refinement of α-Fe and its improvement on magnetic properties of melt-spun nanocomposite Pr2Fe14B/α-Fe magnets by low wheel speed spinning

Controllable Nd2Fe14B/α-Fe Nanocomposites: Chemical Synthesis and Magnetic Properties

Enhancement of the Exchange Coupling Interaction of Nanocomposite Nd2Fe14B/α-Fe Magnets by a Small Amount of Sm Substitution for Nd

Micromagnetic Study for Magnetic Properties of Exchange Coupled Nanocomposite Magnetic Systems with Nd2Fe14B Grains Embedded in Α-Fe Matrix

Ferromagnetic/antiferromagnetic Exchange Coupling in Melt-Spun NdFeB Nanocomposites

A New Approach to Fabricate Nd2Fe14B/α-Fe Nanocomposite Precursors by Selective Removal of Nd from Nd–Fe–B Powders

Micromagnetic Simulation for Optimizing Nanocomposite Nd2Fe14B/α-Fe Permanent Magnets by Changing Grain Size and Volume Fraction

Study On The Magnetic Properties And Microstructure Of Nd-Fe-B Nanocomposite Permanent Magnets

Nd2Fe14B/α-Fe nanocrystalline two-phase composite permanent magnetic alloys

Fe64b22.8nd6.6y3.9nb2.7 Bulk Nanocomposite Magnets with Improved Size and Magnetic Properties

Fundamental Properties of Melt-Spun Stoichiometric Y2Fe14B Alloy and the Advantages of Nd Substitution

On the Cooling Rate of Strip Cast Ingots for Sintered NdFeB Magnets

Fe 14 B / aFe nanocomposites : chemical synthesis and magnetic properties †

Magnetization Reversal Behavior of Α-Fe/nd 2 Fe 1 4 B Nanocomposites Prepared by Controlled Melt Spinning

Microstructure refinement and significant improvements of magnetic properties in Pr2Fe14B/α-Fe nanocomposites

Effect of Cu and Cu–Ti additions on the microstructures and magnetic properties of Nd2Fe14B–α-Fe nanocomposite magnets