Abstract:Conventional binding materials, such as silicate cement and lime, present high energy consumption, pollution, and carbon emissions. Therefore, we utilize crushed stone as a stabilization material. Magnesium oxychloride cement (MOC) is modified and used as an inorganic admixture owing to its eco-friendly nature and low carbon content. We analysed the control indicators of an integrated design of MOC-stabilized crushed stone by conducting unconfined compressive strength and water-resistance tests. The optimum mixing composition of the MOC-stabilized crushed stone was determined through the response surface methodology. We determined the best approach and dosage for improving the water resistance of MOC-stabilized crushed stone by comparing the effects of four modification methods: fly ash, citric acid + silica fume, phosphoric acid + waterborne polyurethane, and dihydrogen phosphate potassium salt. We also perform a comparison with 5% ordinary silicate cement-stabilized crushed stone. The results indicate that the MOC-stabilized crushed stone exhibits a rapid increase in strength in the early stage, but this rate reduces after 28 days. The mixing design employs the 4-day unconfined compressive strength and 1-day water resistance coefficient as the technical indicators. The best mixing composition includes a 4.27% MOC dosage and a molar ratio of MgO/MgCl 2 of 5.85. We use 1% citric acid + 10% silica fume in equal amounts to replace the MOC dopant method for composite modification of the MOC stabilized crushed stone. Consequently, the 1-day water resistance coefficient before water immersion is significantly increased from 0.78 to 0.91 and its 4-day unconfined compressive strength is only reduced by 0.10 MPa. This significantly improves the water resistance of the MOC-stabilized crushed stone and ensures that its strength remains unaffected, which is the optimal modification method. However, this method must ensure that a small amount of citric acid and silica fume are uniformly distributed in the MOC-stabilized crushed stone, which increases the construction difficulty of the road base.

Macroscopic properties and microscopic characterisation of an optimally designed anti-cracking stone base course filled with cement stabilised macadam

Systematical Calibration and Validation of Discrete Element Models for Fiber Reinforced Cement Treated Aggregates

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Predicting Fatigue Damage Growth in Cement-Treated Base Layer Built with Construction and Demolition Waste

Investigation of Mechanical and Shrinkage Performance for Large-Size Cement-Stabilized Aggregates

Investigation of Preparation and Shrinkage Characteristics of Multi-Source Solid Waste-Based Cementitious Materials

Properties of Macadam Stabilized with Cement and Asphalt Emulsion

Experimental Investigation into the Shakedown State of Unsaturated Road Base Aggregate at Various Fine Contents and Matric Suctions

Experimental study on strength and abrasion-resistance enhancement admixture

Mechanical Properties and Numerical Analyses of Basalt Fiber Crumb Rubber Mortars in Soft Rock Roadways

Macro- and Microscale Properties of Vibration Mixing Cement-Stabilized Macadam: Laboratory and Field Investigation

Mix Design and Field Detection of Large-Particle-Size Graded Crushed Stone Mixtures for Pavement Reconstruction

Characteristics of Cement-Stabilized Macadam Containing Surface-Treated Recycled Aggregates

Investigating on the Pavement Performance of Multi-Source Solid Wastes by Cement and Fly Ash

Fatigue characteristics of cement-stabilized steel slag base course for asphalt pavement structure considering different paving methods

Preparation and Performance Improvement Mechanism Investigation of High-Performance Cementitious Grout Material for Semi-Flexible Pavement

Experimental Study on Mechanical Properties of RAP Fiber Cement Stabilized Macadam

Microcracking treatment mechanism of semi-rigid base asphalt pavement with discrete-continuous coupling simulation

Research on Design Indicators for Graded Crushed Stone Mixture Based on Vibration Molding Method

Mixture composition design of magnesium oxychloride cement-stabilized crushed stone materials applied as a pavement base