Abstract:Cu-SSZ-13 and Zr-modified Cu-SSZ-13 catalysts with different Zr/Cu mass ratios were prepared by ion-exchange and impregnation methods, respectively. The NH3-SCR performance tests were performed using the catalyst performance evaluation device to investigate the effects of different Zr/Cu mass ratios on the catalyst ammonia-selective catalytic reduction (NH3-SCR) performance. X-ray diffraction, ICP-OES, BET, NH3 temperature-programed desorption (NH3-TPD), H2 temperature-programmed reduction (H2-TPR), X-ray photoelectron spectrometry, and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) were used to characterize the catalysts. The results show that the prepared Cu-SSZ-13 catalyst had good catalytic activity. Zr introduction was carried out on this basis. The results showed that proper Zr doping improved the catalytic activity at low temperatures and widened the high-temperature stage, with an optimal activity stage at a Zr/Cu mass ratio of 0.2. The NO x conversion efficiency was close to 100% at 200 °C and over 80% at 450 °C. The active species were well dispersed on the catalyst surface, and the metal modification did not change the crystal structure of the zeolite. The NH3-TPD results showed that the Zr-modified catalyst had more abundant acid sites, and the H2-TPR results indicated that the Cu species on the catalyst had excellent reducibility at low temperatures. The interaction between Cu and Zr could regulate the Cu+ and Cu2+ proportion on the catalyst surface, which facilitated the increase in the Cu+ for fast SCR reaction at low temperatures. With abundant acid sites and both SCR reactions following the Eley-Rideal (E-R) and Langmuir-Hinshelwood (L-H) mechanism on the catalyst surface at a low temperature of 150 °C, more abundant acid sites and reaction paths created favorable conditions for NH3-SCR reactions at low temperatures.

Correction: Exploring the optimal ratio of elemental components of the Cu/SSZ-13 framework: the reformation of NH 3 -SCR properties

Exploring the optimal ratio of elemental components of the Cu/SSZ-13 framework: the reformation of NH 3 -SCR properties

Correction: Promotional mechanism of enhanced denitration activity with Cu modification in a Ce/TiO 2 –ZrO 2 catalyst for a low temperature NH 3 -SCR system

Correction: A two-dimensional MXene-supported CuRu catalyst for efficient electrochemical nitrate reduction to ammonia

Optimizing the distribution and proportion of various active sites for better NH3-SCR property over Cu/SSZ-13

Correction: Additive-mediated intercalation and surface modification of MXenes

Correction: Bimetallic CeZr 5 -UiO-66 as a highly efficient photocatalyst for the nitrogen reduction reaction

Redistributing Cu species in Cu-SSZ-13 zeolite as NH3-SCR catalyst via a simple ion-exchange

Correction: Promoting nitrate electroreduction to ammonia over A-site deficient cobalt-based perovskite oxides

Correction: Nitride MXenes as sulfur hosts for thermodynamic and kinetic suppression of polysulfide shuttling: a computational study

Correction: f-Element heavy pnictogen chemistry

Correction: Comparative environmental assessment of zeolites synthesized from chemicals and natural minerals

Basic understanding of Cu‐SSZ‐13 in catalyzing low‐temperature selective catalytic reduction of NOx by ammonia

Correction: Porous RuO 2 -Co 3 O 4 /C nanocubes as high-performance trifunctional electrocatalysts for zinc–air batteries and overall water splitting

Unraveling the NH3-SCR-DeNOx Mechanism of Cu-SSZ-13 Variants by Spectroscopic and Transient Techniques

A controllable zeolite framework stability of Cu/SAPO-34 via adjusting the copper coordination environment for NH 3 -SCR under hydrothermal condition

The Comparative Study of Reaction Mechanisms and Catalytic Performances of Cu–SSZ-13 and Fe–SSZ-13 for the NH3-SCR Reaction

Correction: Synthesis of heteroleptic phosphine–copper( i ) complexes: fluorescence sensing and catalytic properties

Study on the Performance of the Zr-Modified Cu-SSZ-13 Catalyst for Low-Temperature NH3-SCR

Mechanistic Insights into the Enhanced Low-Temperature Activity of Cu-SSZ-13 by MnOx-CeO2 Modification for Standard SCR Reaction and Fast SCR Reactions

Correction: A highly active Z-scheme SnS/Zn2SnO4 photocatalyst fabricated for methylene blue degradation