Abstract:An anisotropic elastic-damage coupled constitutive model for plain concrete is developed, which describes the concrete performance degradation. The damage variable, related to the surface density of micro-cracks and micro-voids, and represented by a second order tensor, is governed by the principal tension strain components. For adequately describing the partial crack opening closure effect under tension and compression for concrete, a new suitable thermodynamic potential is proposed to express the state equations for modeling the mechanical behaviors. Within the framework of thermodynamic potential, concrete strain mechanisms are identified in the proposed anisotropic damage model while each state variable is physically explained and justified. The strain equivalence hypothesis is used for deriving the constitutive equations, which leads to the development of a decoupled algorithm for effective stress computation and damage evolution. Additionally, a detailed numerical algorithm is described and the simulations are shown for uni-axial compression, tension and multi-axial loadings. For verifying the numerical results, a series of experiments on concrete were carried out. Reasonably good agreement between experimental results and the predicted values was observed. The proposed constitutive model can be used to accurately model the concrete behaviors under uni-axial compression, tension and multiaxial loadings. Additionally, the presented work is expected to be very useful in the nonlinear finite element analysis of large-scale concrete structures.

Modeling of degradation processes in historical mortars

Meso-scale mechanical model for mortar deformation under freeze thaw cycles

A stochastic damage model for evaluating the internal deterioration of concrete due to freeze–thaw action

Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures

Mesoscale Simulation of Deformation for Mortar and Concrete under Cyclic Freezing and Thawing Stress

Degradation Mechanisms of Mortar and Plaster Layers

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Mesoscale Simulation of Concrete Behavior with Non-Uniform Frost Damage with Verification by CT Imaging

Computational Modeling of Drying Shrinkage in Early‐Age Concrete

Modeling of Thermochemomechanical Couplings of Concrete at Early Ages

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Numerical Modelling of Connections Between Stones in Foundations of Historical Buildings

Meso-Scale Mechanical Deterioration Of Mortar Subjected To Freeze Thaw Cycles And Sodium Chloride Attack

Hygro-thermo-mechanical analysis of spalling in concrete walls at high temperatures as a moving boundary problem

Microstructural modeling of moisture-thermal and mechanical behavior within concrete during drying at elevated temperatures

A novel multi-scale model for predicting the thermal damage of hybrid fiber-reinforced concrete

Material degradation due to moisture and temperature. Part 1: Mathematical model, analysis, and analytical solutions

Two‐dimensional Rigid Body Spring Method Based Micro‐mesoscale Study of Mechanical Strengthening/damaging Effects to Concrete by Frost Action

Model of Chloride Penetration into Cracked Concrete Subject to Drying–wetting Cycles

Hygrothermal Degradation of Epoxy Electrical Insulating Material-Testing and Mathematical Modeling

Micromechanics-Based Simulations of Compressive and Tensile Testing on Lime-Based Mortars