Abstract:High -strength concrete (HSC) suffers severe shrinkage, which deteriorates the structural safety of buildings over time. Therefore, this study aims to search for indexes that could reflect the development of early drying shrinkage in HSC with different types/quantities of minerals. The influences of minerals on the internal pore structure and water evaporation of HSC were investigated by experimental work, whose correlation with early drying shrinkage was clarified. The results indicated that pore size distribution (PSD) and water evaporation of HSC should be taken into account simultaneously, facilitating the proposal of a two -factor parameter, rs, and a smaller rs was accompanied by greater drying shrinkage of samples. In addition, only partial mesopore lost water that led to drying shrinkage of HSC instead of water in all mesopores. Finally, an early drying shrinkage model of HSC based on rs was established correspondingly, which was in line with the experimental data, showing great accuracy, suitability and values in practice in reflecting early drying shrinkage behaviors of the HSC selected in this study. However, the current model is based on pore structure parameters obtained from mercury intrusion porosimetry (MIP). The backscattered electron image analysis (BSE-IA) measurement of pore structure indicates that MIP underestimates the content of pores larger than 200 nm. Therefore, the actual parameter rs should be greater than the currently calculated value. In the future, with the development of pore structure testing techniques, a more accurate rs value that closely represents the true value should be obtained, and a more universal model that considers several factors should be established.

Computational Modeling of Drying Shrinkage in Early‐Age Concrete

Identification of Indexes That Could Reflect Early Drying Shrinkage of High Strength Concrete with Minerals

Is Early Drying Shrinkage Still Determined by the Mesopore Content? A Case Study of Cement Paste with Minerals

Modeling of Thermochemomechanical Couplings of Concrete at Early Ages

Micromechanical Modeling on Autogenous and Drying Shrinkages of Concrete

Numerical Analysis of Drying Shrinkage in Long Reinforced Concrete Structure

A Coupled Hygro-Thermal Model of Early-Age Concrete Based on Micro-Pore Structure Evolution

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

An implicit consideration of fluid flow in the calculation of drying shrinkage of porous materials: Case of saturated concrete in low humidity environment

Multiphasic model of early stage hydration in concrete using the theory of porous media

Modeling on Shrinkage Stress in Early-Age Concrete Pavements

Integrative Studies on Autogenous and Drying Shrinkages of Concrete at Early-Age

Moisture Movement in Early-Age Concrete under Cement Hydration and Environmental Drying

Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures

A new method for predicting compressive strength of cement-based materials

Calculation of Moisture Distribution in Early-Age Concrete

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Shrinkage And Interior Humidity Of Concrete Under Dry-Wet Cycles

Theoretical Modeling and Verification of Concrete Moisture Diffusion Surface Factor

Early Age Properties and Cracking Control of Concrete

Calculation of shrinkage strain in early-age concrete structures---an example with concrete pavements