Abstract:Titanium matrix composites (TMC) have potential applications in the aerospace industry because of their excellent performance. The comprehensive performance of TMC mainly depends on the matrix, reinforcement and interface characteristics. Hence, this study discussed the knowledge of microstructure-property relationships in detail. Crack-free high-mass-proportion TiCp/Ti6Al4Vcomposites were successfully prepared by directed energy deposition (DED). As the TiCp mass fraction increasing from 0 to 50%, the quantity of primary TiC and unmelted TiC (UMT) increased. Meanwhile, the refined α-Ti in the composites had a relatively weak texture. In addition, the interface between primary TiC and α-Ti was a semi-coherent interface, exhibiting a <math>112-0</math> α-Ti // [110]TiC, <math>1-100</math> α-Ti // <math>1-11</math> TiC orientation relationship, which facilitated the heterogeneous nucleation of Ti and improved bonding of primary TiC with the matrix. With the increase in microhardness taking the form of a cubic function, the wear mechanism was found to transform from abrasive wear to slight delamination wear. Due to the fact that both UMT and primary TiC bonded well with Ti64 matrix, they shared partial friction to protect matrix from severe abrasion, resulting in an excellent wear resistance of composites. Moreover, the thermal conductivity of 50% TiCp/Ti6Al4V was 9.063 <math>W∙m-1∙K-1</math>, which was nearly 26.5% higher than that of Ti6Al4V. Owing to the premature cracking of brittle UMT and dendritic TiC, the tensile strength and elongation of the composite with 50% TiCp were 515.5 MPa and 1.83%, which decreased by 45.8% and 78.8%, respectively. Adding a high proportion of TiCp can significantly improve the hardness and wear resistance of TMC, whereas it is detrimental to the tensile performance of TMC. The study have significant implications for the design of novel TMC, particularly for the aerospace industrial applications.

Studies on hardness, elastic modulus and high temperature oxidation resistance of TiC and TiB 2 dispersed titanium aluminide (Ti45Al5Nb0.5Si) composites developed by laser direct energy deposition

Microstructure and Wear-resistant Properties of in situ TiB-TiC Reinforced Titanium Matrix Composites by Laser Deposition Manufacturing

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

Microstructure evolution and underlying thermal behavior of high-content TiC reinforced titanium matrix composites fabricated by laser directed energy deposition

In Situ Fabrication of TiC/Ti–Matrix Composites by Laser Directed Energy Deposition

Laser directed energy deposited Ti-48Al-2Cr-2Nb alloy: An investigation of high temperature oxidation behavior

Investigations of the microstructure and performance of TiCp/Ti6Al4V composites prepared by directed laser deposition

Graded microstructure and properties of TiCp/Ti6Al4V composites manufactured by laser melting deposition

Microstructure Evaluation and High-Temperature Wear Performance of Hard Protective Layer Deposited on Titanium Alloy via Laser Metal Deposition

New insights into the microstructural evolution and properties of (TiB+TiC)/Ti–6Al–4V composite via laser directed energy deposition using B 4 C nanoparticles

Fabrication of a TiC-Ti Matrix Composite Coating Using Ultrasonic Vibration-Assisted Laser Directed Energy Deposition: The Effects of Ultrasonic Vibration and TiC Content

Microstructure and tensile properties of TiCp/Ti6Al4V composites by laser melting deposition with different dissolving degrees of TiC

In-situ TiB2-TiC reinforced Fe-Al composite coating on 6061 aluminum alloy by laser surface modification

Laser metal deposition of TiB/Ti6Al4V composites with first-scale network microstructure

Investigation of TiB distribution characteristics on the microstructure of in situ TiB/Ti6Al4V-ELI manufactured by laser metal deposition

Formability, densification behavior and hierarchical grain structure of laser-directed energy deposition of TiB reinforced titanium matrix composites

Microstructure and high-temperature oxidation behavior of Ti3AlC 2/W composites

Investigation of Ti2AlNb-Added TiAl Composite Prepared by Direct Laser Deposition

High-temperature oxidation behaviour of Ti65 titanium alloy fabricated by laser direct energy deposition

High-temperature Oxidation Performance and Its Mechanism of TiC/Inconel 625 Composites Prepared by Laser Metal Deposition Additive Manufacturing

High-mass-proportion TiCp/Ti6Al4V titanium matrix composites prepared by directed energy deposition