Abstract:Purpose: A promising approach to enable FLASH conformal proton therapy is to passively degrade a single energy layer using a patient-specific range modulator. We propose an innovative method to directly optimize the geometrical characteristics of the range modulator and the treatment plan with respect to user defined constraints, similarly to state-of-the-art IMPT inverse planning. Methods: The kind of range modulators proposed in this study is a voxelized object which can be placed in the CT for dose computation, which simplifies the simulation pipeline. Both the geometrical characteristics of the range modulator and the weights of the PBS spots were directly optimized with respect to constraints on the dose using a first-order method. A modified Monte Carlo dose engine was used to provide an estimate of the gradient of the relaxed constraints with respect to the elevation values of the range modulator. Results: Assessed on a head and neck case, dose conformity logically appeared to be significantly degraded compared to IMPT. We then demonstrated that this degradation came mainly from the use of a large range shifter and therefore from physical limitations inherent in the passive degradation of beam energy. The geometry of the range modulator, on the other hand, was shown to be very close to being optimal. PBS dose rates were computed and discussed with respect to FLASH objectives. Conclusions: The voxelized range modulators optimized with the proposed method were proven to be optimal on a head and neck case characterized by two rather large volumes, with irregular contours and variable depths. The optimized geometry differed from conventional ridge filters as it was arbitrarily set by the optimizer. This kind of range modulators can be directly added in the CT for dose computation and is well suited for 3D printing.

Energy degrader optimization for medical beam lines

Numerical Simulations to Evaluate and Compare the Performances of Existing and Novel Degrader Materials for Proton Therapy

On the accuracy of Monte Carlo based beam dynamics models for the degrader in proton therapy facilities

Beam Energy Considerations for Gold Nano-Particle Enhanced Radiation Treatment

Optimization of LANSCE Proton Beam Performance for Isotope Production

Optimization of X-Ray Spectra in Medical Sterilization Accelerator through MCNP

Dealing with megawatt beams

Optimization Of Low-Energy Electron Beam Production For Superficial Cancer Treatments By Monte Carlo Code

Design of a large energy acceptance beamline using Fixed Field Accelerator optics

Concept and performance evaluation of two 3 GHz buncher units optimizing the dose rate of a novel preclinical proton minibeam irradiation facility

The optimization for the conceptual design of a 300 MeV proton synchrotron

Physical Design of A 10 Mev Linac for Polymer Radiation Processing

Beam Optics Analysis for the 120-keV Multiaperture Accelerator of Neutral Beam Injector

Fast Output Energy Regulation in a Medical Proton Linac

Pulse Parameter Optimization Method for Ultra High Dose Rate Electron Treatment

Start-to-end Modeling and Transmission Efficiency Optimization for a Cyclotron-Based Proton Therapy Beamline

Optimization of the Multi-turn Injection Efficiency for Medical Synchrotron

Optimizing linear energy transfer distribution in intensity-modulated proton therapy using the alternating direction method of multipliers

Design Optimization of Permanent-Magnet Based Compact Transport Systems for Laser-Driven Proton Beams

Optimization of patient-specific range modulators for conformal FLASH proton therapy

A Parallel General Purpose Multi-Objective Optimization Framework, with Application to Beam Dynamics