Abstract:Simple and reliable mass production of platinum-based alloy catalysts with excellent activity and stability is an enormous challenge for the wide commercialization of proton-exchange membrane fuel cells (PEMFC), especially those with ultralow loading of Pt. Herein, an economical, highly durable, and efficient catalyst consisting of structurally ordered intermetallic Pt3Co alloy nanoparticles with ultralow Pt loading (1.4 wt %) supported on hierarchically porous carbon structure (three-dimensional, 3D Pt3Co/C) were synthesized with large-scale production by the NaCl-template-assisted approach. The obtained best sample, 3D Pt3Co/C#1, exhibited mass activities of 11.56 and 0.70 A mgPt–1 for oxygen reduction reactions (ORRs) in alkaline and acidic electrolytes, which are 60.8 and 6.4 times those of commercial Pt/C, respectively. Furthermore, the 3D Pt3Co/C#1 exhibited excellent stability both in acidic and alkaline electrolytes, with almost no decay of the half-wave potential after 5000 potential cycles. This work proposes a new high-yielding, simple, and environmentally friendly method to fabricate excellent Pt-based alloy electrocatalysts with ultralow loading of Pt, which opens up new hopes for the development of PEMFC.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c08839.SEM image of the sample 3D Pt3Co/C#1 after freeze-drying (Figure S1); XRD patterns of 3D Pt3Co/C#1 and 3D Pt/C (Figure S2); deconvoluted Pt 4f XPS spectra of 3D Pt3Co/C#2 and 3D Pt3Co/C#3 (Figure S3); deconvoluted Pt 4f XPS spectra of Pt3Co/C and 3D Pt/C (Figure S4); deconvolution of Pt 4f XPS spectra for all samples (Table S1); cyclic voltammograms in an N2-saturated 0.1 M HClO4 solution for 3D Pt3Co/C#1 and Pt/C (Figure S5); LSV curves of 3D Pt3Co/C#1 in O2-saturated 0.1 KOH and 0.1 M HClO4 electrolytes at room temperature under different rotating rates. The scan rate is 10 mV s–1 (Figure S6); Tafel plots of 3D Pt3Co/C#1 and 3D Pt/C (Figure S7); the number of transferred electrons of 3D Pt3Co/C#1 and Pt/C (Figure S8); the stability comparison of 3D Pt3Co/C#1 and the commercial Pt/C in O2-saturated 0.1 KOH and 0.1 M HClO4 electrolytes after 5000 cycles of ADT (Figure S9); SEM images of the sample 3D Pt3Co/C#1 after ADT (Figure S10); TEM image of the sample 3D Pt3Co/C#1 after ADT and the size distribution (Figure S11); XRD patterns of 3D Pt3Co/C#1 and after ADT (Figure S12); SEM images of the 3D Pt3Co/C-2 (Figure S13); LSV curves of 3D Pt3Co/C-2 recorded 0.1 M KOH and 0.1 M HClO4 electrolytes (Figure S14); the stability comparison of 3D Pt3Co/C#1 and the commercial Pt/C after 10 000 cycles of ADT (Figure S15); and comparison of ORR mass activities of the synthesized sample 3D Pt3Co/C#1 with reported precious catalysts (Table S2) (PDF)This article has not yet been cited by other publications.

Crystal Orientation in Pt-Based Alloys Induced by W(CO) 6 : Driving Oxygen Electroreduction Catalysis

Designing Highly-Efficient Oxygen Evolution Reaction FeCoNiCrMnOx Electrocatalyst Via Coexisted Crystalline and Amorphous Phases: Experiment and Theory

Crystal Facet Induced Single-Atom Pd/CoxOyon a Tunable Metal-Support Interface for Low Temperature Catalytic Oxidation

Unveiling enhanced oxygen reduction activity in PtCo bimetallic solid solutions through controlled crystal strain

Local tetragonal distortion of Pt alloy catalysts for enhanced oxygen reduction reaction efficiency

Catalytic Performance Comparison of Shape-Dependent Nanocrystals and Oriented Ultrathin Films of Pt4Cu Alloy in the Formic Acid Oxidation Process

Leaching- and Sintering-Resistant Hollow or Structurally Ordered Intermetallic PtFe Alloy Catalysts for Oxygen Reduction Reactions

Efficient and Superiorly Durable Pt-Lean Electrocatalysts of Pt−W Alloys for the Oxygen Reduction Reaction

Dynamic Surface Dealloying for Pt3Co/C Catalysts with a Pt-Enriched Surface for the Oxygen Reduction Reaction

Synergistic Ni‐W Dimer Sites Induced Stable Compressive Strain for Boosting the Performance of Pt as Electrocatalyst for the Oxygen Reduction Reaction

Efficient synthesis of Pt3Co/NC alloy catalysts with enhanced durability and activity for the oxygen reduction reaction

Alloying Matters for Ordering: Synthesis of Highly Ordered PtCo Intermetallic Catalysts for Fuel Cells

Low-Pt Octahedral PtCuCo Nanoalloys: "One Stone, Four Birds" for Oxygen Reduction and Methanol Oxidation Reactions

Versatile Synthesis of Pd−M (M=Cr, Mo, W) Alloy Nanosheets Flower‐like Superstructures for Efficient Oxygen Reduction Electrocatalysis

Ligand carbonization in-situ derived ultrathin carbon shells enable high-temperature confinement synthesis of PtCo alloy catalysts for high-efficiency fuel cells

Crystalline-Amorphous Heterophase PdMoCrW Tetrametallene: Highly Efficient Oxygen Reduction Electrocatalysts for a Long-Term Zn-Air Battery

Enhancing electron interaction between Pt and support for superior electrochemical performance through atomic layer deposition of tungsten oxide

Templated-Assisted Synthesis of Structurally Ordered Intermetallic Pt 3 Co with Ultralow Loading Supported on 3D Porous Carbon for Oxygen Reduction Reaction

Optimizing the Synergy Between Alloy and Alloy-Oxide Interface for CO Oxidation in Bimetallic Catalysts.

Facet-dependent electronic state of Pt single atoms anchoring on CeO2 nanocrystal for CO (preferential) oxidation

Direct Thermal Annealing Synthesis of Ordered Pt Alloy Nanoparticles Coated with a Thin N-Doped Carbon Shell for the Oxygen Reduction Reaction