Abstract:In order to clarify the effect of particle coagulation on the heat transfer properties, the governing equations of nanofluid together with the equation for nanoparticles in the SiO2/water nanofluid flowing through a turbulent tube are solved numerically in the range of Reynolds number 3000 <= Re <= 16,000 and particle volume fraction 0.005 <= phi <= 0.04. Some results are validated by comparing with the experimental results. The effect of particle convection, diffusion, and coagulation on the pressure drop increment P, particle distribution, and heat transfer of nanofluid are analyzed. The main innovation is that it gives the effect of particle coagulation on the pressure drop, particle distribution, and heat transfer. The results showed that increment P increases with the increase in Re and phi. When inlet velocity is small, the increase in increment P caused by adding particles is relatively large, and increment P increases most obviously compared with the case of pure water when the inlet velocity is 0.589 m/s and phi is 0.004. Particle number concentration M-0 decreases along the flow direction, and M-0 near the wall is decreased to the original 2% and decreased by about 90% in the central area. M-0 increases with increasing Re but with decreasing phi, and basically presents a uniform distribution in the core area of the tube. The geometric mean diameter of particle GMD increases with increasing phi, but with decreasing Re. GMD is the minimum in the inlet area, and gradually increases along the flow direction. The geometric standard deviation of particle diameter GSD increases sharply at the inlet and decreases in the inlet area, remains almost unchanged in the whole tube, and finally decreases rapidly again at the outlet. The effects of Re and phi on the variation in GSD along the flow direction are insignificant. The values of convective heat transfer coefficient h and Nusselt number Nu are larger for nanofluids than that for pure water. h and Nu increase with the increase in Re and phi. Interestingly, the variation in phi from 0.005 to 0.04 has little effect on h and Nu.

Heat transfer performance of a vapor–liquid–solid three-phase circulating fluidized bed evaporation system with different concentrations of Na2SO4 solutions

Performance of a new vapor–liquid–solid three-phase circulating fluidized bed evaporator

FLOW BOILING HEAT TRANSFER IN A NEW VAPOR-LIQUID-SOLID THREE-PHASE CIRCULATING FLUIDIZED BED EVAPORATOR

Effect of particle collision behavior on heat transfer performance in a down-flow circulating fluidized bed evaporator

HEAT TRANSFER CHARACTERISTICS AND BUBBLE BEHAVIORS DURING NUCLEATE FLOW BOILING FOR SODIUM CHLORIDE SOLUTION

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

Study of the Natural Circulation Flow Boiling Heat Transfer Based On Partially Superhydrophilic Surface Modification

Particle Distribution and Heat Transfer of SiO<sub>2</sub>/Water Nanofluid in the Turbulent Tube Flow

Experimental study on forced convection heat transfer of KNO3–Ca(NO3)2 + SiO2 molten salt nanofluid in circular tube

Nanofluid Heat Capacities

An experimental investigation into the effect of sodium salts on quartz particle agglomeration and bed defluidisation in a bubbling fluidised bed

Experimental Study of Heat Transfer and Bubble Behaviors of NaCl Solutions During Nucleate Flow Boiling

Evaporating Temperature Uniformity of the Pulsating Heat Pipe with Surfactant Solutions at Different Concentrations

Investigation on the thermal performances of [Na(TX-7)]SCN/NH3 absorption systems based on physical properties measurement of the working fluid

Heat Transfer Study from a Salty Droplet Film on a Horizontal Tube in Mechanical Vapor Recompression Crystallization System

Experimental and Numerical Study of Nucleate Pool Boiling Heat Transfer and Bubble Dynamics in Saline Solution

Pool boiling heat transfer mechanism of nano-particle suspensions

Experimental study on gas–liquid interfacial area and mass transfer coefficient in three-phase circulating fluidized beds

Molecular dynamics study of the wettability effect on the evaporation of thin liquid sodium film

Distribution of heat transfer coefficient in the vertical tube of falling film evaporator treating saline wastewater based on micro flow and experimental verification

Numerical investigation on improvement in pool boiling heat transfer characteristics using different nanofluid concentrations