Abstract:In this article, a reconfigurable 1 $\times $ 4 filtering beamforming network (FBFN), which is capable of generating reconfigurable progressive phase difference and amplitude distribution, is presented for the first time. It simply consists of one standard Wilkinson power divider and two identical reconfigurable filtering power dividers (FPDs), where the FPD is constructed by four mutually coupled resonators and three nonresonating nodes. By controlling the nonresonating nodes, the coupling coefficients and the resonant frequencies of resonators, arbitrary progressive phase difference, and reconfigurable amplitude distribution can be easily obtained, demonstrating highly flexible reconfigurability. Meanwhile, since the proposed FBFN does not require any individual phase shifter or crossover, it also exhibits a more compact size compared to the conventional beamforming networks based on the Butler matrix. The detailed theoretical analysis of the FBFN is presented and design equations for determining its circuit parameters are deduced. To experimentally demonstrate the proposed concept, a 1 $\times $ 4 FBFN prototype is fabricated and measured. Experimental results show that, within a center frequency tuning range from 1.01 to 1.1 GHz, the designed FBFN successfully achieves full reconfigurability, including: 1) continuously tunable progressive phase difference in full 360 $^{\circ}$ ; 2) reconfigurable amplitude distribution; and 3) reconfigurable numbers of output ports. Furthermore, a four-element linear antenna array is designed to validate the performance of the FBFN for beam steering. It is shown that, when applied in a phased array, the proposed FBFN is able to perform continuous beam scanning and effective sidelobe level control while maintaining a reasonable filtering performance.

Analytical Design Method and Implementation of Broadband 4 × 4 Nolen Matrix

Wideband 4 × 4 Nolen Matrix with 360° Continuously Tuned Differential Phase and Low In-Band Phase Deviation Error

Dimension Expansion Method and Implementation of Broadband Planar 2-D 3 × 3 Nolen Matrix

Design of a 64-Element Dual-Polarized Planar Receive Phased Array with Four Concurrent Reconfigurable Beams for Ka-Band SATCOM

A Ka-Band 64-Element Four-Beam Phased Array Receiver with Inter-Beam Interference Cancellation

An Ultra Broadband Passive Vector Modulator Phase Shifter

Design of Extended Nolen Matrix with Enhanced Beam Controllability and Widened Spatial Coverage

A Broadband Bidirectional Four-Element Four-Beam Beamformer with Compact Floorplan in a 65nm CMOS Technology

A 4-Element 4-Beam Ka-Band Phased-Array Receiver Using Mesh Topology in 65 Nm CMOS

Numerical Study and Experimental Validation of a Four-Way Feeding Network with 45 Deg Broadband Phase Shifts for Antenna Array Applications

Design and Implementation of a Multibeam Filtering Antenna Array Using Compact 3 × 3 Nolen Matrix Aided by Grey Wolf Algorithm

High-Capacity Multiple-Input Multiple-Output Communication for Internet-of-Things Applications Using 3D Steering Nolen Beamforming Array

A novel 4 × 4 butler matrix with continuously tunable phase covering 360° range and application for 1‐D and 2‐D beam scanning array

A Compact Broadside Coupled Stripline 2-D Beamforming Network and Its Application to a 2-D Beam Scanning Array Antenna Using Panasonic Megtron 6 Substrate

Design of a Multimode Beamforming Network Based on the Scattering Matrix Analysis

A Low Complexity $16\times16$ Butler Matrix Design Using Eight-Port Hybrids

Deterministic Solutions to Improved Generalized Joined Coupler Matrix for Multibeam Antennas

A Fully Reconfigurable 1 $\times $ 4 Filtering Beamforming Network With Continuous Phase and Amplitude Control

Uniplanar Beam-Forming Network Employing Eight-Port Hybrid Couplers and Crossovers for 2-D Multibeam Array Antennas

Broadband 1×8 Optical Beamforming Network Based on Anti-resonant Microring Delay Lines

Compact, Ultra-Wideband Butler Matrix Beamformers for the Advanced 5G Band FR3—Part I