A Compact Broadside Coupled Stripline 2-D Beamforming Network and Its Application to a 2-D Beam Scanning Array Antenna Using Panasonic Megtron 6 Substrate

Jean Temga,Takashi Shiba,Noriharu Suematsu

DOI: https://doi.org/10.3390/s24020714

IF: 3.9

2024-01-23

Sensors

Abstract:This article presents a 4-way 2-D butler matrix (BM)-based beamforming network (BFN) using a multilayer substrate broadside coupled stripline (BCS). To achieve the characteristics of a compact, wide-bandwidth, high-gain phased array, a BCS coupler is implemented using the Megtron 6 substrate. The compact 2-D BFN is formed by combining planarly two horizontal BCS couplers and two vertical BCS couplers. The BFN is proposed without a crossover and without a phase shifter, generating phase responses of ±90° in the x- and y-directions, respectively. The proposed BFN exhibits a wide operating band of 66.7% (3–7 GHz) and a compact physical area of just 0.25 λ0 × 0.25 λ0 × 0.04 λ0. The planar 2-D BFN is easily integrated with the patch antenna radiation elements to construct a 2-D multibeam array antenna that generates four fixed beams, one in each quadrant, at an elevation angle of 30° from the broadside to the array axis when the element separation is 0.6 λ0. The physical area of the 2-D multibeam array antenna is just 0.8 λ0 × 0.8 λ0 × 0.04 λ0. The prototypes of the BCS coupler, the 2-D BFN, and the 2-D multibeam array antenna were fabricated and measured. The measured and simulated results were in good agreement. A gain of 9.1 to 9.9 dBi was measured.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation

What problem does this paper attempt to address?

This paper mainly addresses the design of a compact and wideband 2-D beamforming network (BFN) and its application to the 2-D beam-scanning array antenna using Panasonic Megtron 6 substrate. Traditional 2-D BFNs are usually bulky and require cross-connectors and phase shifters, which increase complexity and size. The paper proposes a 4-port 2-D Butler Matrix BFN without cross-connectors and phase shifters, based on wideband edge-coupled stripline (BCS) multilayer technology. The designed 2-D BFN has an operating bandwidth of 66.7% within the frequency range of 3-7 GHz and a physical size of only 0.25 λ0×0.25λ0×0.04λ0.

In the paper, the authors construct the 2-D BFN by combining two horizontal BCS couplers and two vertical BCS couplers, achieving ±90 degrees phase response. This design simplifies the structure, reduces losses, and allows easy integration with patch antenna radiating elements, building a 2-D multi-beam array antenna that generates four fixed beams. The physical size of the array antenna is only 0.8 λ0×0.8λ0×0.04λ0.

The experimental results show good agreement with the simulation results, and the antenna gain ranges from 9.1 to 9.9 dBi. The paper also discusses the advantages of using Panasonic Megtron 6 substrate, such as low transmission loss, thick layers, and high-density interconnects, which make the design more compact, wideband, and improve overall performance. Comparatively, this design is superior to other techniques in terms of size, bandwidth, and losses, making it suitable for 5G mobile communication systems.