Abstract:The onboard fuel in an advanced aero engine can be used to cool the highly compressed hot air in a heat exchanger to restore the air's cooling capacity. In the process, the high fuel temperature leads to thermal oxidative reactions and surface coking. Large eddy simulations have been conducted in this paper to study the combined effects of buoyant and centrifugal forces on heat transfer and thermal oxidative coking of the aviation kerosene, RP-3, in vertical U-bend tubes at a supercritical pressure of 4 MPa. Numerical re-sults indicate that buoyancy exerts its impact on fluid flows and heat transfer mainly in vertical straight sections of the tube, promoting turbulence generation in the downward flow and suppressing turbulence in the upward flow. This causes differences of the heat transfer and surface coking rate in the up-down and down-up cases. Centrifugal force plays an important role in fluid flows and heat transfer in the U -bend section. Strong secondary flows driven by the centrifugal effect significantly enhance heat transfer in the outer region but weaken heat transfer in the inner region of the U-bend section, resulting in up to 300 K circumferential wall temperature difference in the present cases. The large wall temperature gradient and high wall temperature lead to significant thermal oxidative coking inside the tube near the entrance and in the inner region near the exit of the U-bend section. Results herein provide fundamen-tal understanding and have practical implication for the design and safe operation of an air-fuel heat exchanger in aerospace applications.(c) 2022 Elsevier Ltd. All rights reserved.

Enhanced flow and heat transfer of aviation kerosene in porous media microchannels

Asymmetric Heating and Buoyancy Effects on Heat Transfer of Hydrocarbon Fuel in a Horizontal Square Channel at Supercritical Pressures

Large Eddy Simulations of Heat Transfer and Thermal Oxidative Coking of Aviation Kerosene in Vertical U-Tube at a Supercritical Pressure

Numerical Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Consideration of Fuel Pyrolysis and Surface Coking at Supercritical Pressures

Modeling and Simulation of Supercritical-Pressure Turbulent Heat Transfer of Aviation Kerosene with Detailed Pyrolytic Chemical Reactions

Heat Transfer Characteristics of Aviation Kerosene Flowing in Enhanced Tubes at Supercritical Pressure

Numerical Study on Flow and Heat Transfer of Supercritical Hydrocarbon Fuel in Curved Cooling Channel

Conjugate Heat Transfer, Endothermic Fuel Pyrolysis and Surface Coking of Aviation Kerosene in Ribbed Tube at Supercritical Pressure

Computational Study of Heat Exchange and Thermal Oxidative Coking of Supercritical-Pressure Kerosene with Compressed Air in Counterflows

Heat Transfer Characteristics Of Aviation Kerosene In Vertical Upward High Flux Tubes At Supercritical Pressure

Model Validation and Parametric Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Endothermic Pyrolysis at Supercritical Pressure

Numerical Investigation of Convective Heat Transfer of Supercritical Hydrocarbon Fuel in a Tube Filled With Porous Media

Heat Transfer Characteristics of Supercritical Aviation Kerosene at Different Tube Diameters

Numerical heat transfer analysis of transcritical hydrocarbon fuel flow in a tube partially filled with porous media

Heat Transfer Performance of Aviation Kerosene RP-3 Flowing in a Vertical Helical Tube at Supercritical Pressure

Experiments on Heat Transfer of Supercritical Pressure Kerosene in Mini Tube under Ultra-High Heat Fluxes

Flow and Heat Transfer Characteristics of Coal-Based Rocket Kerosene in Mini-Tube with Ultra-High Parameters

Heat transfer performance of RP-3 aviation kerosene at supercritical pressure within a rotating U-shaped channel

Convection Heat-Transfer Characteristics of Supercritical Pressure RP-3 in Horizontal Microchannels

Heat Transfer of Aviation Kerosene at Supercritical Conditions

Flow and Mass Transfer of Pyrolytic Aviation Kerosene in Curved Channel