Abstract:Laser Thomson scattering (LTS) is a minimally invasive measurement technique used for determining electron properties in plasma systems. Sheath model closure validation requires minimally invasive measurements of the electron properties that traverse the boundaries between the bulk plasma, the presheath, and the plasma sheath. Several studies have probed the radial properties along the surface of discharge electrodes with laser-based diagnostics and electrostatic probes. These measurements provide valuable insight into the electron properties in this dynamic region. However, sheath model calibration requires plasma property measurements perpendicular to plasma bounding surfaces, in this case, along the electrode normal vector between discharge electrodes. This work presents the development of a discharge plasma cell and laser Thomson scattering system with a measurement volume step of 1 mm normal to plasma bounding surfaces. The laser Thomson scattering measurements are made between a set of discharge electrodes separated by ∼25 mm that are used to generate a pulsed argon plasma. The spatial distribution of electron temperature and density is measured at several discharge voltages between 8 and 20 kV at a pressure of 8 Torr-Ar. It is determined that the system is statistically stationary and resembles a classic DC discharge plasma. The results are some of the first laser diagnostic-based “between electrode” measurements made along the plasma bounding electrode normal vector. A one-dimensional sheath model is applied to determine the near cathode electron properties, and it is determined that the edge of the presheath is probed in the high-voltage cases. As the lengths of the presheath and sheath decrease with decreasing voltage, the region recedes below the closest probed point to the cathode. To improve the performance of the diagnostic, the step size of the interrogation volume should decrease by an order of magnitude from 1 mm to less than 100 μm, and the data acquisition strategy should be revised to increase the signal-to-noise ratio.

ITER Core Plasma Thomson Scattering diagnostic design

Microwave Diagnostics System in the HL-2A Tokamak

Progress and challenges in the design of ITER's polarimetric Thomson scattering diagnostic system

Design of a Thomson scattering diagnostic for the SMART tokamak

Conceptual Study of a Collective Thomson Scattering Diagnostic for SPARC

Set of Thomson Scattering Diagnostics for TRT

An incoherent Thomson scattering system for measurements near plasma boundaries

Feasibility of a collective Thomson scattering diagnostic for burning plasma control on DEMO

Development of a thermal diagnostic system for the SPARC tokamak

Thomson scattering diagnostics at the Globus M2 tokamak

CO2 Laser Collective Thomson Scattering Diagnostics on the HT-7 Tokamak

Calibration and Test of CsI Scintillator Ion Detection System for Tokamak Magnetic Field Diagnosis Based on Laser-Driven Ion-Beam Trace Probe (LITP)

Core ion measurements with collective Thomson scattering for DEMO burn control

Design of a Thomson scattering diagnostic for the SMall Aspect Ratio Tokamak (SMART)

A thorough experimental assessment of THz-TDS plasma diagnostic techniques for nuclear fusion applications

Laser and microwave instrumentation for ITER and future reactors

Real Time Measurement of Electron Temperature using Coupled Center Tapped Emissive and Langmuir Probe (CCTELP)

Multi-delay coherence imaging spectroscopy optimized for ion temperature measurements in the divertor plasma of the Wendelstein 7-X stellarator

Detecting Neoclassical Tearing Modes in high-temperature ITER plasma scenarios with the ITER prototype Electron Cyclotron Emission Diagnostic

Concept of a Diagnostic System for Measuring the Electron Temperature Profile of Plasma from the Intensity of Electron Cyclotron Emission for the TRT Facility

Design and development of a single-laser 2D Thomson scattering measurement system for TS-6 merging tokamak/magnetic reconnection experiments