Abstract:Laser Thomson scattering (LTS) is a minimally invasive measurement technique used for determining electron properties in plasma systems. Sheath model closure validation requires minimally invasive measurements of the electron properties that traverse the boundaries between the bulk plasma, the presheath, and the plasma sheath. Several studies have probed the radial properties along the surface of discharge electrodes with laser-based diagnostics and electrostatic probes. These measurements provide valuable insight into the electron properties in this dynamic region. However, sheath model calibration requires plasma property measurements perpendicular to plasma bounding surfaces, in this case, along the electrode normal vector between discharge electrodes. This work presents the development of a discharge plasma cell and laser Thomson scattering system with a measurement volume step of 1 mm normal to plasma bounding surfaces. The laser Thomson scattering measurements are made between a set of discharge electrodes separated by ∼25 mm that are used to generate a pulsed argon plasma. The spatial distribution of electron temperature and density is measured at several discharge voltages between 8 and 20 kV at a pressure of 8 Torr-Ar. It is determined that the system is statistically stationary and resembles a classic DC discharge plasma. The results are some of the first laser diagnostic-based “between electrode” measurements made along the plasma bounding electrode normal vector. A one-dimensional sheath model is applied to determine the near cathode electron properties, and it is determined that the edge of the presheath is probed in the high-voltage cases. As the lengths of the presheath and sheath decrease with decreasing voltage, the region recedes below the closest probed point to the cathode. To improve the performance of the diagnostic, the step size of the interrogation volume should decrease by an order of magnitude from 1 mm to less than 100 μm, and the data acquisition strategy should be revised to increase the signal-to-noise ratio.

Design of a Thomson scattering diagnostic for the SMall Aspect Ratio Tokamak (SMART)

Design of a Thomson scattering diagnostic for the SMART tokamak

Radiated power and soft x-ray diagnostics in the SMART tokamak

Design, characterization, and modeling of the Charge eXchange Recombination Spectroscopy (CXRS) suite at the SMall Aspect Ratio Tokamak (SMART)

Conceptual Study of a Collective Thomson Scattering Diagnostic for SPARC

Design and development of the magnetic diagnostic systems for the first operational phase of the SMART tokamak

Performance prediction applying different reduced turbulence models to the SMART tokamak

Thomson scattering diagnostics at the Globus M2 tokamak

Set of Thomson Scattering Diagnostics for TRT

NBI optimization on SMART and implications for scenario development

Development of a thermal diagnostic system for the SPARC tokamak

Design and development of a single-laser 2D Thomson scattering measurement system for TS-6 merging tokamak/magnetic reconnection experiments

ITER Core Plasma Thomson Scattering diagnostic design

Feasibility of a collective Thomson scattering diagnostic for burning plasma control on DEMO

Progress and challenges in the design of ITER's polarimetric Thomson scattering diagnostic system

A thorough experimental assessment of THz-TDS plasma diagnostic techniques for nuclear fusion applications

Collection optics of JT-60SA edge Thomson scattering diagnostic

MHD stability analysis against pressure and current-driven modes in the SMall Aspect Ratio Tokamak

Thomson scattering measurements in the krypton plume of a lanthanum hexaboride hollow cathode in a large vacuum test facility

Advanced Self-Passivating Alloys for an Application under Extreme Conditions

An incoherent Thomson scattering system for measurements near plasma boundaries