Abstract:Promoting grain growth and optimizing microstructure are valid strategies for enhancing gyromagnetic and microwave dielectric properties of low-temperature sintered ferrite materials. Here, a modified low-temperature sintering technique was attempted for the synthesis of LiZnTi ferrites that have compact microstructure and improved performances. Trace amounts of CuO-Bi2O3 mixtures (0.50 wt%) were adopted as sintering additives to promote grain growth and to reduce the sintering temperature. Meanwhile, Li0.42Zn0.27Ti0.11Fe2.2O4 nanoparticles (∼21.9 nm) were synthesized using a sol-gel auto-combustion method and were used to optimize the microstructure and to restrain abnormal grain growth. XRD Rietveld refinement and SEM images revealed that uniform and dense LiZnTi ferrites with single-phase spinel structure were obtained. Results demonstrated that co-doping of Li0.42Zn0.27Ti0.11Fe2.2O4 nanoparticles and CuO-Bi2O3 mixtures allows low-temperature sintering (900 °C) to be achieved and also promotes grain growth and densification. In particular, LiZnTi ferrites that were modified with 5.00 wt% Li0.42Zn0.27Ti0.11Fe2.2O4 nanoparticles and 0.50 wt% CuO-Bi2O3 sintering additives exhibited narrow ferromagnetic resonance linewidth (ΔH, ∼145 Oe) and low dielectric loss tangent (tanδ ε, ∼2.45 × 10−4) at ∼9.50 GHz, high saturation flux density (B s, ∼364 mT), and high squareness ratio (B r/B s, ∼0.89). Such a modified sintering technique at a low sintering temperature, as reported in this work, provides a reference for other advanced ferrites.

Low temperature sintered MnZn ferrites for power applications at the frequency of 1 MHz

Development of Mn-Zn power ferrite with low losses over a broad temperature range for applications in the high frequency region of 0.5-3 MHz

Magnetic and dielectric properties of low‐loss MnZn ferrites with wide temperature stability

Low power loss manganese ferrites with the addition of Ta2O5 for MHz applications

Low-temperature Sintered Li-Ferrites and Their Frequency Properties

Development of High-Temperature High-Permeability MnZn Power Ferrites for MHz Application by Nb2O5 and TiO2 Co-Doping

Microstructure, magnetic, and power loss characteristics of low‐sintered NiCuZn ferrites with La2O3‐Bi2O3 additives

Correlating the microstructure and magnetic properties of MnZn power ferrites via Co2O3 and MoO3 co-doping for MHz applications

High frequency properties of Ba3CO2-xZnxFe24O41 ceramics sintered at low temperature

Co2O3 and SnO2 Doped MnZn Ferrites for Applications at 3–5 MHz Frequencies

Low-temperature sintered hexaferrites for high-frequency multilayer chip inductors

Magnetic and Electrical Properties of Low-Temperature Sintered Mn-doped NiCuZn Ferrites

High frequency properties of Ba3Co2-xZn xFe24O41 Ceramics sintered at low temperature

MnZn power ferrite with high Bs and low core loss

Effect of Bi2O3 and Co2O3 co-doping on power loss characteristics of low-temperature-fired NiCuZn ferrites

Investigation on the Micro-Structure and Magnetic Properties of LMZBS-Bi2O3 Doped Low-Temperature Sintered NiCuZn Ferrites

Synergy effects between Li0.42Zn0.27Ti0.11Fe2.2O4 nanoparticles and CuO-Bi2O3 mixtures in low-temperature sintered LiZnTi ferrites with enhanced gyromagnetic and microwave dielectric properties

Grain refinement and high-frequency properties of spark plasma sintered MnZn ferrite

Effect of Sintering Temperature on Magnetic Core-Loss Properties of a NiCuZn Ferrite for High-Frequency Power Converters

Low-temperature-sintering of Co2Z ferrite materials via Dy3+ ion doping for use in high-frequency applications

Low-T Sintering, Low-Dielectric Materials for High Frequency Multilayer Chip Inductors