Abstract:Carbon nanotube/continuous carbon fiber reinforced poly(ethylene terephthalate) (CNT/CCF/PET) composites are prepared by melt impregnating. The effects of CF and CNT content on the mechanical properties, melt and crystallization behaviors, and submicroscopic morphology of CNT/CCF/PET composites are studied. The tensile test results show that the increase of CF and the addition of appropriate amount of CNT improved the tensile strength and tensile modulus of the composites. When the content of CNT is 1.0 wt% and the content of CF is 56 wt%, the properties of the composites are the best, with tensile strength of 1728.7 MPa and tensile modulus of 25.1 GPa, which is much higher than that of traditional resin matrix composites. The results of dynamic mechanical analysis (DMA) show that the storage modulus of the composites increased with the increase of CF and CNT content. In particular, the addition of CNT greatly reduced the loss modulus of the composites. Morphological analysis show that the addition of CNT improved the fiber–matrix interface of the composite, which changes from fiber pull-out and fracture failure to fiber matrix fracture failure, and the fiber matrix interface is firmly bonded. In addition, there are polymer coated CNT protrusions on the surface of the fiber was observed. The results of differential scanning calorimetry (DSC) show that the melting temperature and crystallization temperature of the composites increased with the increase of CF content. The addition of CNT had little effect on the melting temperature of the composites, but it further improved the crystallization temperature of the composites. The effect of CNT content on the crystallization kinetics of the composites is studied. The non-isothermal crystallization kinetics of the composites is described by Jeziorny's improved Avrami equation. The results show that CNT has a great influence on the crystallization type of the composites. As a nucleating agent, CNT has obvious heterogeneous nucleation effect in the composites, which improves the crystallization rate of PET.

Processing and Property Study of MWCNT/Thermotropic Liquid Crystal Polymer Composite

Liquid Crystalline Pet/60hba-Mwnts Composite: Synthesis, Characterization, and Properties

Nanocomposites of Poly(vinylidene Fluoride) with Multiwalled Carbon Nanotubes

Stability of dielectric elastomer/carbon nanotube composites coupling electrostriction and polarization

Preparation and characterization of organic modified montmorillonite/polylactic acid nanocomposites

Effect of the selective localization of carbon nanotubes and phase domain in immiscible blends on tunable microwave dielectric properties

Melt extrudate swell behavior of multi‐walled carbon nanotubes filled‐polypropylene composites

Synthesis and Characterization of Nanostructured Copolymer-Grafted Multiwalled Carbon Nanotube Composite Thermoplastic Elastomers Toward Unique Morphology and Strongly Enhanced Mechanical Properties

Influence of a Liquid-Like MWCNT Reinforcement on Interfacial and Mechanical Properties of Carbon Fiber Filament Winding Composites

Poly(p-phenylene terephthalamide)/carbon nanotube composite membrane: Preparation via polyanion solution method and mechanical property enhancement

Effect of Multi-Walled Carbon Nanotubes on the Properties of Polyoxymethylene

Processing, Structure, and Properties of Multiwalled Carbon Nanotube/poly(hydroxybutyrate‐co‐valerate) Biopolymer Nanocomposites

Mechanical Properties, Melting and Crystallization Behaviors, and Morphology of Carbon Nanotubes/Continuous Carbon Fiber Reinforced Polyethylene Terephthalate Composites

Processing and characterization of thermoplastic nanocomposite fibers of hot melt copolyamide and carbon nanotubes

Fabrication and Characterization of PMMA/MWCNTs Composite Materials

Preparation and Properties of Cyclic Olefin Copolymers Multiwalled Carbon Nanotube Nanocomposites

Study on preparation and phase transition temperature of liquid crystal copolyester/clay nanocomposites

Preparation and Properties of MWCNT/poly(glycerol-sebacate-citrate) Elastomer Composite

The Study on the Microstructures and High Performances of Melt Blending Polyurethane/Multiwalled Carbon Nanotubes Composites

Enhanced thermomechanical properties of epoxy-multiwalled CNT nano-composites

Microstructure-mechanical property relationships of polymer nanocomposite reinforced with lyophilized montmorillonite/carbon nanotubes hybrid particles