Abstract:This study aimed to investigate the mechanical behavior of an environmentally friendly granulated blast furnace slag-based geopolymer matrix reinforced with modified multi-walled carbon nanotubes (MWCNTs). The modified MWCNTs were obtained using a modification method combining nitric acid and sulfuric acid and were then dispersed using sodium dodecylsulfate (SDS) as a dispersant. Two types and three concentrations of MWCNTs were mixed directly into the aqueous solution, sonicated, and then mechanically mixed with waste granulated blast furnace slag to form the geopolymer matrix. Raman and Fourier transform infrared (FT-IR) spectroscopy were used to evaluate the ordered structure and crystallization degree of the modified MWCNTs. Then, the dispersity of the modified MWCNTs was characterized using transmission electron microscopy (TEM). The compressive and bending strengths were measured to evaluate the mechanical behavior of specimens. Moreover, the polycondensation products, polycondensation degree, pore structure, and microscopic morphology of the geopolymer matrix were analyzed using X-ray diffraction (XRD), FT-IR spectroscopy, nuclear magnetic resonance (NMR), mercury intrusion porosimetry (MIP), and field emission scanning electron microscopy with energy dispersive X-ray spectroscopy (FESEM-EDS). The experimental results showed that the incorporation of 0.1% functionalized MWCNTs had an optimal influence on the fluidity and mechanical behavior. The slump diameters of geopolymers with 0.1% functionalized MWCNTs with and without SDS were increased by 16.3% and 23.5%, respectively, compared with the reference geopolymer matrix. For geopolymer matrix samples at a curing age of 28 d, the compressive strength of geopolymers with 0.1% functionalized MWCNTs with and without SDS were increased by 16.3% and 17.6%, respectively. For the bending strength, the corresponding increases were 17.6% and 18.7%, respectively. It was found that functionalized MWCNTs could increase the degree of polycondensation, leading to a more traditional amorphous N-A-S-H phase, a finer C–S–H phase, more Q4 (2Al) and Q4 (3Al), and lower porosity. In addition, the propagation of micro-cracks in the geopolymers was inhibited by the incorporation of functionalized MWCNTs.

Preparation and Properties of MWCNT/poly(glycerol-sebacate-citrate) Elastomer Composite

Liquid Crystalline Pet/60hba-Mwnts Composite: Synthesis, Characterization, and Properties

Characterization of chemical structure and morphology of MCS graft terpolymer

Effects of Chemical Functionalization of MWCNTs on the Structural and Physical Properties of Elastomeric Copolyetherester-based Composite Fibers

Novel Nanocomposite Of Poly(Acrylonitrile-Co-Glycidyl Methacrylate) Crosslinked With Jeffamine-Functionalized Multiwalled Carbon Nanotubes As Gel Polymer Electrolytes

Preparation and Properties of Gluten/calcium Carbonate Composites

Synthesis and Characterization of Nanostructured Copolymer-Grafted Multiwalled Carbon Nanotube Composite Thermoplastic Elastomers Toward Unique Morphology and Strongly Enhanced Mechanical Properties

Processing and Property Study of MWCNT/Thermotropic Liquid Crystal Polymer Composite

Rheology, Crystallization Behaviors, and Thermal Stabilities of Poly(Butylene Succinate)/Pristine Multiwalled Carbon Nanotube Composites Obtained by Melt Compounding

Investigation on Physical Behavior, Impermeability and Micromechanism of Engineering Geopolymer Composites Modified with MWCNTs

Influence of a Liquid-Like MWCNT Reinforcement on Interfacial and Mechanical Properties of Carbon Fiber Filament Winding Composites

From Soft to Strong Elastomers: the Role of Additional Crosslinkings in Copolymer-Grafted Multiwalled Carbon Nanotube Composite Thermoplastic Elastomers

Rheological behaviors of the multi-wall carbon nanotubes/polyethylene composites prepared by a master batch method

Development of MWCNTs@PDMS nanocomposites with enhanced hydrophobicity and thermo-oxidative stability

Preparation and characterization of polyurethane/multiwalled carbon nanotube composites

PGMA-grafted MWCNTs: correlation between molecular weight of grafted PGMA and dispersion state of MWCNTs–PGMA in an epoxy matrix

Effect of multi-walled carbon nanotubes on durability of high-strength slag-based geopolymer

Influence of modified multi-walled carbon nanotubes on the mechanical behavior and toughening mechanism of an environmentally friendly granulated blast furnace slag-based geopolymer matrix

Preparation and Properties of Waterborne Polysiloxaneurethane/Clay Nanocomposite

Electrical Resistivity, Crystallization and Mechanical Properties of Polypropylene/Multi-Walled Carbon Nanotube/Calcium Carbonate Composites Prepared by Melt Mixing

Poly(vinyl Pyrrolidone) Wrapped Multi-Walled Carbon Nanotube/poly(vinyl Alcohol) Composite Hydrogels