Abstract:Boron is commonly added to superalloys in small amounts to enhance creep resistance, but can lead to cracking at high concentrations, especially during the additive manufacturing process. Two variants of CoNi-based GammaPrint®-700 superalloy with different B contents (0.08 at% vs 0.16 at%) were printed via laser powder bed fusion (LPBF) with the same printing parameters, with only the high B alloy exhibiting solidification cracking. Atom probe tomography (APT) revealed stronger segregation behaviors in the high B alloy compared to the low B alloy at both the inter-dendritic regions and grain boundaries (GBs). The segregation behavior at inter-dendritic regions was well captured with Scheil simulation and can correlate with the existing cracking susceptibility index (CSI) on cracking tendencies, although high angle GBs are where cracking occurs according to electron backscatter diffraction (EBSD) measurements. Additionally, the extent of GB segregation was compared between the high B and low B alloy. Higher B additions led to significantly more GB B segregation in the high B alloy compared to the low B alloy. For the high B alloy, the cracked region of one GB exhibited higher levels of B compared to the uncracked region of the same GB. However, much higher B contents were also found in two other uncracked GBs in the high B alloy, which demonstrates that higher GB B concentrations are not fully responsible for the cracking. A much larger variance in GB B segregation content was found in the high B alloy compared to the low B alloy. These phenomena were explained with a solidification model with the GB segregation content expressed explicitly by a modified Langmuir-McLean equation. This model linked the GB segregation content with solidification undercooling, which can be used as quantitative cracking criteria for future builds.

Interphase boundary segregation in IN738 manufactured via electron-beam powder bed fusion

Grain boundary network evolution in electron-beam powder bed fusion nickel-based superalloy Inconel 738

Multiple Preheating Processes for Suppressing Liquefaction Cracks in IN738LC Superalloy Fabricated by Electron Beam Powder Bed Fusion (EB-PBF)

Interfacial Segregation and Precipitates Behavior in the Ultrafine Grained Al-based Metal Matrix Composites

Microstructure, mechanical properties and strengthening mechanisms of IN738LC alloy produced by Electron Beam Selective Melting

Segregation-assisted phase transformation and anti-phase boundary formation during creep of a γ′-strengthened Co-based superalloy at high temperatures

Characterization of Interfacial Transition Zone of Functionally Graded Materials with Graded Composition from a Single Material in Electron Beam Powder Bed Fusion

Phase Field Simulation of Grain Boundary Segregation and Radiation-Enhanced Segregation in Fe-Cr Alloys

Precipitation of δ phase in Inconel 718 superalloy: The role of grain boundary and plastic deformation

Precipitate-free zones formation at grain boundaries in γ/γ′ Ni-based superalloys

Quantitative Characterization of Elemental Segregation in Inconel 718 Superalloy by Micro-Beam X-ray Fluorescence Spectroscopy and Its Correlation Study

Computational approach to grain boundary segregation engineering of nickel-base superalloys

Al2O3 Grain Boundary Segregation in a Thermal Barrier Coating on a Ni-Based Superalloy

On the tungsten segregation at γ/γ′ interface in a Ni-based single-crystal superalloy

Microsegregation behavior of Inconel 718 superalloy prepared by electron beam smelting layered solidification technology

Effect of dual phase structure induced by chemical segregation on hot tearing reduction in additive manufacturing

Elemental Segregation on Stacking Faults and γ″ Formation During Creep in 718plus Superalloy

Improve the ductility of a nickel based superalloy by optimizing secondary phase distribution through grain boundary engineering

Understanding the influence of boron in additively manufactured GammaPrint®-700 CoNi-based superalloy

Grain boundary engineering during the laser powder bed fusion of TiC/316L stainless steel composites: New mechanism for forming TiC-induced special grain boundaries

Non-equilibrium solidification behavior associated with powder characteristics during electron beam additive manufacturing