Abstract:A novel quasi-continuous network reinforced structure that consists of borides and carbides in B4C/TiAl matrix composites was innovatively designed for the strengthening at high temperatures. Simultaneously, impacts of such reinforced structures on microstructures and mechanical properties of the composites have been unveiled. TiAl matrix units in B4C/TiAl composites are duplex microstructures which are composed of (alpha 2+gamma) colonies and gamma grains. The ascent of B4C contents triggers off the formation of network reinforced structures in the layers of TiAl matrix units. With B4C contents increasing to 0.1 wt%, elasticity modulus and ultimate compressive strengths of B4C/TiAl composites are upgraded from 10.944 GPa and 723.10 MPa to 16.052 GPa and 774.611 MPa. As B4C contents reach at 5.0 wt%, elasticity modulus and ultimate compressive strengths further soar to 17.244 GPa and 799.19 MPa. Borides and carbides within the quasi-continuous network reinforced structures are unfolded as stripe and needle shaped TiB with B27 structure and Ti2AlC particles with MAX structure. Parts of Ti2AlC particles take TiB as cores to nucleate and grow. Moreover, TiC phases usually act as the cores for the nucleation of Ti2AlC particles. The orientation relationships of such reinforcements represent as [011]TiC// [010]TiB, (1-11)[011]TiC//(0006) [-2110]Ti2AlC, [100]TiB//[0001]Ti2AlC, [010]TiB//[-2110]Ti2AlC and [001]TiB// [01-10]Ti2AlC. The fractures of TiB are usually along or perpendicular to [010]TiB direction. Meanwhile, the fracture surfaces of TiB are always parallel to (100)TiB or (010)TiB planes. Additionally, dislocations slip through Ti2AlC particles and lead to separation and sliding of staking planes (0001)Ti2AlC within Ti2AlC lattices. TiB and Ti2AlC with alternative distribution can stabilize the network reinforced structures and upgrade properties of B4C/TiAl composites.

Novel strategy of planting nano-TiB fibers with ultra-fine network distribution into Ti-composite powder and its thermal transition mechanism

Tailoring A Novel Network Reinforcement Architecture Exploiting Superior Tensile Properties of in Situ Tibw/Ti Composites

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

Towards High Strengthening Efficiency by In-Situ Planting Nano-Tib Networks into Titanium Matrix Composites

Simultaneously improving the strength and ductility of the as-sintered (TiB+La2O3)/Ti composites by in-situ planting ultra-fine networks into the composite powder

Network formation and mechanical property of additive manufactured TiB/Ti composites

Formation mechanism of TiB2 nanoparticles and development of TiB2p/6201 nanocomposites as a neoteric conducting material

Enhancing strength-ductility synergy in nano-sized TiB 2 /Al composite via rapid solidification and thermo-mechanical processing

Enhanced high temperature performance of two-scale network-structured (TiB+Ti5Si3)/TA15 composites by simultaneous adjustment of matrix and nano-scaled Ti5Si3

Novel Composite Powders with Uniform Tib2 Nano-Particle Distribution for 3d Printing

Microstructure evolution of Ti64-TiBw composites via electron beam powder bed fusion using as-prepared composite powder as feedstock

High-performance Titanium-Based Composite Strengthened with Heterogeneous Network Structure

Embedding Boron into Ti Powder for Direct Laser Deposited Titanium Matrix Composite: Microstructure Evolution and the Role of Nano-Tib Network Structure

Controllable Two-Scale Network Architecture and Enhanced Mechanical Properties of (ti 5 Si 3 +tibw)/ti6al4v Composites

Effects of Nanosized Particles on Microstructure and Mechanical Properties of an Aged In-Situ TiB2/Al-Cu-Li Composite

Microstructures and Mechanical Properties of TiAl Matrix Composites with Multi-Precipitates Quasi-Continuous Network Reinforced Structures

Effects of Ti5Si3 characteristics adjustment on microstructure and tensile properties of in-situ (Ti5Si3+TiBw)/Ti6Al4V composites with two-scale network architecture

Preparation and Characterization of TiB2/Al3Ti/Al2O3 Composite Nano-powder

Fabrication of (Tib/ti)-Tial Composites with a Controlled Laminated Architecture and Enhanced Mechanical Properties

Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Properties at Elevated Temperatures

Tailoring martensitic transformation and mechanical properties of Ti–Ni composite reinforced by network structure of in-situ TiB and La2O3 phase