Abstract:The fermi-level pinning effect caused by low-order contact interface influences the performance of carbon nanotube (CNT) network field-effect transistors (FETs). In this paper, ambipolar CNT network FETs subjected to van der Waals (vdW) contact are demonstrated with the negligible Fermi-level pinning effect by using a physical transfer approach. The vdW contact method allows for the metal and CNT network to retain their intrinsic states without direct chemical bonding and interface interactions, leading to low injection barrier and contact resistance (Rc). Therefore, the field-effect mobilities of vdW metal-semiconductor (MS) contact devices in regions of dominance of the holes (μp) and electrons (μn) were 18.71 and 2.4 cm2 V−1 s−1 and yielded enhancements 2 and 10 times, respectively, beyond those of devices with typically evaporated electrodes. In addition, to develop ambipolar devices with balanced output capability, two-dimensional materials (h-BN and graphene) were inserted into the MS interface to tune the injection barrier. Because the metal work function was effectively reduced by inserting the h-BN layer, devices with h-BN inserted obtained values of μp and μn of 15.85 and 5.1 cm2 V−1 s−1, respectively. For devices with graphene, because of its field-modulated band alignment capability, μn improved to 8.38 cm2 V−1 s−1, while μp dropped slightly to 17.5 cm2 V−1 s−1. Therefore, the vdW contact method is a highly efficient integration strategy for high-performance CNT network FETs, and the different insertion layers can efficiently tune the ambipolar transportation of CNT network FETs rather than using different contact metals. This research provides an avenue for the design of future CNT network-based electronics.

Effect of Quasi-One-Dimensional Properties on Source/Drain Contacts in Vertical Nanowire Field-Effect Transistors (VNWFETs)

Fringing Field Effects on Electrical Resistivity of Semiconductor Nanowire-Metal Contacts

Comparative study on the characteristics among few-walled carbon nanotube array field-effect transistors

Deep Insight into Channel Engineering of Sub-3 Nm-Node P-Type Nanosheet Transistors with a Quantum Transport Model

Comprehensive Insights into Effect of Van Der Waals Contact on Carbon Nanotube Network Field-Effect Transistors

A Resonant Tunneling Nanowire Field Effect Transistor with Physical Contractions: A Negative Differential Resistance Device for Low Power Very Large Scale Integration Applications

Contact Properties of Field-Effect Transistors Based on Indium Arsenide Nanowires Thinner Than 16 Nm

A Non-Quasi-static Model for Nanowire Gate-All-around Tunneling Field-Effect Transistors

Impact of Gate Dielectric Geometry on the Nanowire MOSFETs Performance and Scaling

Two-Dimensional Vertical Transistor with One-Dimensional van der Waals Contact

Effects of Quantized Energy Levels of QDs Confined in Asymmetric Barriers Within Silicon Nanowire Transistor

Effect of Improved Contact on Reliability of Sub-60 Nm Carbon Nanotube Vias.

Operating regimes and contact resistance of side-bonded contacts to thin heavily doped semiconductor nanowires

Quantum simulation investigation of work-function variation in nanowire tunnel FETs

Numerical Investigation on the Junctionless Nanowire FET

Suppressing the Excess OFF-state Current of Short-Channel InAs Nanowire Field-Effect Transistors by Nanoscale Partial-Gate

Challenges from quantum capacitance in process of high performance Carbon Nanotube-FETs design

2D Structural Variation Impact on Electrostatic Performance of Sub-5um Nanosheet Transistors Subject to Strong Quantum Confinement

Electrical Characteristics Of Field-Effect Transistors Based On Indium Arsenide Nanowire Thinner Than 10nm

One-dimensional semimetal contacts to two-dimensional semiconductors

Performance Limit of Gate-All-Around Si Nanowire Field-Effect Transistors: an Ab Initio Quantum Transport Simulation