Abstract:In this paper, the Ti-6Al-4V(TC4) alloy specimens pre-coated with Ti-Cu-Al multilayer films were plasma nitrided at different temperatures (673K-823K), and their microstructure and mechanical properties were studied. Surface hardness changes induced by pre-coating combined with plasma nitriding were also analyzed and correlated with microstructural features and elemental distribution. Ti-Cu-Al multilayer films with clear interfaces on deformed TC4 alloy were fabricated. The multilayer structure survived after nitriding, and a thick gradient nitrided layer with a gradient distribution of N elements was formed. The bonded nitride on the surface provides high hardness, reaching 948HV at 723K. In addition, the nitride TC4 alloy's wear resistance exhibits a significant improvement compared with the untreated specimen, especially at 823K, the mass wear rate decreased by more than 80%. It is mainly attributed to the N/metal element gradient distribution of the thick nitride layer. The nitriding behavior of α-Ti/Cu/Al was investigated by first-principles calculations. According to the thermodynamic calculation results, N atoms preferentially occupy the octahedral interstitial sites of α-Ti and the tetrahedral interstitial sites of Al. It is worth noting that N atoms have poor thermodynamic stability in Cu, which is consistent with the experimental results. The calculated elastic properties agree with the experimental cross-sectional hardness results, showing a smooth decreasing trend of the complex modulus and hardness on the micrometer length scale and explaining the improved structure performance. These results may provide crucial inspirations for future experimental work preparing high-performance nitrided layers.

Two-dimensional code marking and coloration mechanism on titanium alloy surfaces via laser gas nitriding

Laser Surface Nitriding of Ti–6Al–4V Alloy in Nitrogen–Argon Atmospheres

Laser nitriding of titanium surface and TOFMS (time of fight mass spectra) analysis

Microstructure evolution and mass transfer behavior during multi-pass laser surface nitriding process on titanium alloy

Research on Technology of Laser Gas Nitriding on TA2 Pure Titanium Surface

Surface nitridation of titanium using pulse laser gas alloying method and its microstructure analysis with XRD and SEM

Mechanisms in Surface Coloring of Titanium Alloy Induced by Picosecond Laser

Microstructure and Hardness of the Laser Surface Treated Titanium

Investigation of nitrogen ionization state and its effect on the nitride layer during fiber laser gas nitriding of Ti-6Al-4V alloy

Laser Surface Nitriding of Ti6al4v Alloy Coupled with an External Stress Field

Microstructure and Wear Resistance of One-Step In-Situ Synthesized TiN/Al Composite Coatings on Ti6Al4V Alloy by a Laser Nitriding Process

Investigation on Surface Nitridation of Titanium by Pulsed Laser

Elastic-plastic Mechanical Properties of Laser Nitriding Layer on Ti6Al4V Alloy Characterized by Nanoindentation and Nanoscratch

Enhancement of Wear and Corrosion Resistance of Ti6Al4V Alloy through Hollow Cathode Discharge-Assisted Plasma Nitriding

Controllable Dot-Matrix Marking on Titanium Alloy with Anti-Reflective Micro-Structures Using Defocused Femtosecond Laser

In Situ Synthesis of Titanium Nickel Intermetallic Compounds Layer and TiN Coating by Laser Cladding

Sequential Combination of Femtosecond Laser Ablation and Induced Micro/Nano Structures for Marking Units with High‐Recognition‐Rate

Laser Surface Alloying of Pure Titanium with TiN–B–Si–Ni Mixed Powders

Modification mechanism of Ti-6Al-4V alloy with pre-coated Ti-Cu-Al multilayer film treated by ion nitriding: Experiments and first-principles calculations

Microstructure and Properties of Ti6Al4V Surface Processed by Continuous Wave Laser in Different Atmospheres

Surface Modification of Ti-4al-2v Alloy by Nitrogen Implantation