Abstract:Non-enzymatic Screen-Printed Chemiresistive Interdigitated Electrodes (SPCIE) were designed and fabricated using a low-cost screen-printing method for detection of the glucose. The Interdigitated Electrodes (IDE) pattern was printed using conductive graphene ink on the glossy surface of the photo paper. The proposed glossy photo paper-based SPCIE are functionalized with Multi-walled Carbon Nanotubes-Zinc Oxide (MWCNTs-ZnO) nanofibers to create the chemiresistive matrix. Further, to bind these nanofibers with the graphene electrode surface, we have used the green synthesized silver nanoparticles (AgNPs) with Banana Flower Stem Fluid (BFSF) as a binder solution. AgNPs with BFSF form the Conductive Porous Natural Binder Layer (CPNBL). It does not allow to increase the resistivity of the deposited material on graphene electrodes and also keeps the nanofibers intact with paper-based SPCIE. The synthesized material of MWCNT-ZnO nanofibers and green synthesized AgNPs with BFSF as a binder were characterized by Ultraviolet-visible spectroscopy (UV-Vis), Scanning Electron Microscope (SEM), X-Ray Diffraction (XRD), and Fourier-Transform Infrared Spectroscopy (FTIR). The amperometric measurements were performed on the proposed SPCIE sensor to detect the glucose sample directly. The innovative paper-based SPCIE glucose sensor exhibits a linear corelation between current measurements and glucose concentration in the range between 45.22 μM – 20 mM, with a regression coefficient (R2) of 0.9902 and a lower Limit of Detection (LoD) of 45.22 μM (n=5). The sensitivity of the developed SPCIE sensor was 2178.57 μAmM-1cm-2, and the sensor's response time determined was approximately equal to 18 seconds. The proposed sensor was also tested for real blood serum sample, and Relative Standard Deviation (RSD) was found equal to 2.95%.

Facile chemiresistive biosensor functionalized with PANI/GOx and novel green synthesized silver nanoparticles for glucose sensing

3D Porous Structured Polyaniline/reduced Graphene Oxide/copper Oxide Decorated Electrode for High Performance Nonenzymatic Glucose Detection

Non-enzymatic glucose detection with Screen-Printed Chemiresistive sensor using green synthesised silver nanoparticle and multi-walled carbon nanotubes-zinc oxide nanofibers

Development of glucose biosensors based on nanostructured graphene-conducting polyaniline composite.

The Micro Network of Polyacrylonitrile (Pan)-Polyaniline (Pani)-Graphene (GRA) Hybrid Nanocomposites for Effective Electrochemical Detection of Glucose and Improved Stability

Improved Sensitivity and Selectivity Glucose Biosensor Based on PANI-GRA Nanocomposite Film Decorated with Pt Nanoparticles

Direct Decoration of Carbon Nanohorns with Binary Nickel-Cobalt Sulfide Nanosheets Towards Non-Enzymatic Glucose Sensing in Human Fluids

Dendrimer‐encapsulated Pt Nanoparticles/polyaniline Nanofibers for Glucose Detection

Fabrication of flexible glucose sensor based on heterostructure ZnO nanosheets decorated PU/Chitosan-PANI hybrid nanofiber

A nanocomposite prepared from magnetite nanoparticles, polyaniline and carboxy-modified graphene oxide for non-enzymatic sensing of glucose

Sensitive and Enzyme-Free Glucose Sensor Based on Copper Nanowires/Polyaniline/Reduced Graphene Oxide Nanocomposite Ink

Non-enzymatic electrochemical glucose sensors based on polyaniline/reduced-graphene-oxide nanocomposites functionalized with silver nanoparticles

Design of the polyacrylonitrile-reduced graphene oxide nanocomposite-based non-enzymatic electrochemical biosensor for glucose detection

Reduced Graphene Oxide and Polyaniline Nanofibers Nanocomposite for the Development of an Amperometric Glucose Biosensor

Non-Enzymatic Electrochemical Sensing of Glucose with a Carbon Black/Polyaniline/Silver Nanoparticle Composite

Chronoampermetric detection of enzymatic glucose sensor based on doped polyindole/MWCNT composites modified onto screen-printed carbon electrode as portable sensing device for diabetes

Optimization of graphene oxide/conducting polymer nanocomposites as electrodes for nonenzymatic glucose sensing. Part I: Preparation, characterization and surface morphology

Fabrication of a Graphene@Ni foam-supported silver nanoplates-PANI 3D architecture electrode for enzyme-free glucose sensing

Development of glucose biosensors based on plasma polymerization-assisted nanocomposites of polyaniline, tin oxide, and three-dimensional reduced graphene oxide

Development of Rapid Dispense-Printed Flexible Interdigitated Electrode Modified with rGO-TiO2 Nanohybrid for Glucose Detection

Copper Nanoparticle/Graphene Oxide/Single Wall Carbon Nanotube Hybrid Materials As Electrochemical Sensing Platform for Nonenzymatic Glucose Detection