Abstract:Non-enzymatic Screen-Printed Chemiresistive Interdigitated Electrodes (SPCIE) were designed and fabricated using a low-cost screen-printing method for detection of the glucose. The Interdigitated Electrodes (IDE) pattern was printed using conductive graphene ink on the glossy surface of the photo paper. The proposed glossy photo paper-based SPCIE are functionalized with Multi-walled Carbon Nanotubes-Zinc Oxide (MWCNTs-ZnO) nanofibers to create the chemiresistive matrix. Further, to bind these nanofibers with the graphene electrode surface, we have used the green synthesized silver nanoparticles (AgNPs) with Banana Flower Stem Fluid (BFSF) as a binder solution. AgNPs with BFSF form the Conductive Porous Natural Binder Layer (CPNBL). It does not allow to increase the resistivity of the deposited material on graphene electrodes and also keeps the nanofibers intact with paper-based SPCIE. The synthesized material of MWCNT-ZnO nanofibers and green synthesized AgNPs with BFSF as a binder were characterized by Ultraviolet-visible spectroscopy (UV-Vis), Scanning Electron Microscope (SEM), X-Ray Diffraction (XRD), and Fourier-Transform Infrared Spectroscopy (FTIR). The amperometric measurements were performed on the proposed SPCIE sensor to detect the glucose sample directly. The innovative paper-based SPCIE glucose sensor exhibits a linear corelation between current measurements and glucose concentration in the range between 45.22 μM – 20 mM, with a regression coefficient (R2) of 0.9902 and a lower Limit of Detection (LoD) of 45.22 μM (n=5). The sensitivity of the developed SPCIE sensor was 2178.57 μAmM-1cm-2, and the sensor's response time determined was approximately equal to 18 seconds. The proposed sensor was also tested for real blood serum sample, and Relative Standard Deviation (RSD) was found equal to 2.95%.

Development of Rapid Dispense-Printed Flexible Interdigitated Electrode Modified with rGO-TiO2 Nanohybrid for Glucose Detection

Research on Direct Electron Transfer of Native Glucose Oxidase at PEDOT:PSS Hydrogels Modified Electrode

3D Porous Structured Polyaniline/reduced Graphene Oxide/copper Oxide Decorated Electrode for High Performance Nonenzymatic Glucose Detection

Direct Electrochemical Detection of Glucose on PEDOT Functionalized Screen-Printed Electrodes

Facile chemiresistive biosensor functionalized with PANI/GOx and novel green synthesized silver nanoparticles for glucose sensing

Construction of flexible enzymatic electrode based on gradient hollow fiber membrane and multi-wall carbon tubes meshes.

Blood glucose sensing by back gated transistor strips sensitized by CuO hollow spheres and rGO

A Glucose Biosensor Based on Direct Electron Transfer of Glucose Oxidase on PEDOT Modified Microelectrode

A disposable and sensitive non-enzymatic glucose sensor based on 3D graphene/Cu2O modified carbon paper electrode

Ultrasensitive Non-Enzymatic Glucose Sensors Based on Hybrid Reduced Graphene Oxide and Carbonized Silk Fabric Electrodes Decorated with Cu Nanoflowers

Disposable Non-Enzymatic Glucose Sensors Using Screen-Printed Nickel/Carbon Composites on Indium Tin Oxide Electrodes

Preparation and Characterization of Reduced Graphene Oxide/fe3o4 Nanocomposite by a Facile In-Situ Deposition Method for Glucose Biosensor Applications

Fabrication of MnOx/Ni(OH)2 Electro-Deposited Sulfonated Polyimides/graphene Nano-Sheets Membrane and Used for Electrochemical Sensing of Glucose

High-performance Non-Enzymatic Glucose-Sensing Electrode Fabricated by Α-Nickel Hydroxide-Reduced Graphene Oxide Nanocomposite on Nickel Foam Substrate

Non-enzymatic glucose detection with Screen-Printed Chemiresistive sensor using green synthesised silver nanoparticle and multi-walled carbon nanotubes-zinc oxide nanofibers

In-situ two-step electrodeposition of α-CD-rGO/Ni-MOF composite film for superior glucose sensing

Glucose Oxidase/Nano-ZnO/Thin Film Deposit FTO as an Innovative Clinical Transducer: A Sensitive Glucose Biosensor

Nickel Nanoparticles Modified Conducting Polymer Composite of Reduced Graphene Oxide Doped Poly(3,4-Ethylenedioxythiophene) for Enhanced Nonenzymatic Glucose Sensing

Facilely Prepared Co-based MOF Functionalized N, S-doped Reduced Graphene Oxide for Electrochemical Non-Enzymatic Glucose Sensing

Enhancing Glucose Biosensing with Graphene Oxide and Ferrocene-Modified Linear Poly(ethylenimine)

Fabrications of the Flexible Non-Enzymatic Glucose Sensors Using Au-CuO-rGO and Au-CuO-rGO-MWCNTs Nanocomposites as Carriers