Abstract:Fiber reinforced polymer (FRP) composite structures are widely being used in aircraft wings, wind turbine blades, helicopter rotor blades and tail rotors. These structures are often exposed to external dynamic loads which shorten their lifetime. Carbon nanotubes (CNT) reinforced epoxy resin have distinctive characteristic in providing a significant increase in mechanical properties and stiffness of the FRP composite. The present study investigates the micro, macro and structural analysis of composites with and without reinforcement of multi walled carbon nanotubes (MWCNT). The carboxylic acid (COOH) functionalized MWCNT with more than 95% chemical purity having average dimensions of 17 nm outer diameter and 10 μm length were used to characterize their chemical properties and evaluate the mechanical and free and forced vibration response of composites with and without MWCNT reinforcement. Initially, the powder form of the MWCNT was taken for the identification of true density (ρ) using the gas displacement technique. The COOH-MWCNT were then randomly dispersed in low viscosity epoxy resin (LY556) through an organic solvent using the ultrasonic liquid processor. Test samples were fabricated by adding the hardener (HY951) at 10:1 ratio in the sonicated solution to obtain the Young's Modulus (E) of MWCNT using Nano Indentation. Following this, Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM), Fourier Transform Infrared spectroscopy (FT-IR), Thermo gravimetric analysis (TGA) were also used to quantify the dispersion, distribution, structural integrity, aspect ratio, functional group and purity level of nanotubes. Further, the impact hammer test based on ASTM E1876, tensile test based on ASTM D3039 and free and forced vibration analysis of the hybrid composite beams were carried out to identify the elastic properties, fundamental natural frequencies, damping ratio and transverse deflection of the hybrid structure. It was shown that the addition of 1 wt% of COOH-MWCNT in fiber reinforced composite beam increases the stiffness of the structure and consequently increases the natural frequencies and damping at each resonant response dominant peaks. The strong adhesion of bonding and proper dispersion of CNTs in the wide surface area of composite strengthen the polymer composites substantially than those of the Glass/epoxy composite structures without reinforcement of MWCNT.

Effect of SWCNT Deposition by Spraying Technique on Mechanical Properties and Electrical Conductivity of Peek Laminates

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Preparation and functional study of epoxy composites reinforced with ultra-low content single-walled carbon nanotubes

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Effects of the Electrophoretic Deposition of CNTs on the Mechanical Properties of Ti/CFRP Composite Laminates

Carbon fiber/epoxy composite property enhancement through incorporation of carbon nanotubes at the fiber-matrix interphase – Part II: Mechanical and electrical properties of carbon nanotube coated carbon fiber composites

Mechanical properties of a carbon fiber reinforced epoxy resin composite improved by integrating multi-walled carbon nanotubes and graphene nanoplatelets

Processing and Performance Improvements of Swnt Paper Reinforced Peek Nanocomposites

Mechanical enhancement effect of the interlayer hybrid CNT film/carbon fiber/epoxy composite

Effect of NH2-MWCNTs sprayed carbon fiber on the mechanical properties of carbon fiber reinforced polycarbonate composite for lightweight structural applications

The enhanced interlaminar toughness of carbon fiber reinforced poly(ether ether ketone) composites modified by carbon nanotubes

The Effect of Single Walled Carbon Nanotubes on Conductivity and Thermal Properties of Glass Fiber Reinforced Composites

Interlaminar Properties of Prepregs Reinforced with Multiwalled Carbon Nanotubes/Graphene Oxide

Study on Mechanical Properties of Carbon Nanotube Reinforced Composites

The effect of carbon nanotubes loading and processing parameters on the electrical, mechanical, and viscoelastic properties of epoxy-based composites

Material and Mechanical Characterization of Multi-Functional Carbon Nanotube Reinforced Hybrid Composite Materials

Effect of Carbon Nanotubes on the Mechanical Properties and Crystallization Behavior of Poly(ether Ether Ketone)

Enhanced Electrical Conductivity and Interlaminar Fracture Toughness of CF/EP Composites via Interleaving Conductive Thermoplastic Films

Carbon nanotube composites for thermal management

Preparation and Properties of Carbon Fiber/Carbon Nanotube Wet-Laid Composites

Impact Properties of Multi-Wall Carbon Nanotubes Modified Composites