Abstract:Carbon nanotube film (CNTF) interlayer toughened carbon fiber (CF) reinforced epoxy resin (EP) hybrid composites were fabricated via resin transfer molding (RTM) processing in this paper. Multi-walled carbon nanotubes were prepared by chemical vapour deposition, and carbon nanobute films were prepared through vacuum filtration. Model I interlaminar fracture toughness G(IC) of laminates and model II interlaminar fracture toughness G(IIC) of laminates are used to characterize the fracture toughness. of the RTM laminates. Furthermore, the toughening mechanism is discussed through microstructure of the fracture surface combining mechanical properties. The compact degree of the carbon nanotube films was influenced by the ratio of the multi-walled carbon nanotubes, which led to different impregnation of the carbon nanobute films to the epoxy resin. Experimental results indicated that the carbon nanotube films from carbon nanotubes of large aspect ratios exhibited better impregnation effect than those films from carbon nanotubes of small aspect ratios. The carbon nanotube films intercalated in the interlayer of the composites between the carbon fiber and the matrix resin as a whole laminated structure, and they still kept a continuous grid structure in the CNTF/CF/EP hybrid composites. As to the model I interlaminar fracture toughness G(IC) of laminates,the carbon nanotube films have no obvious improvement on the G(IC) value. However, the carbon nanotube films laid between the carbon fiber layers changed the failure mode of the CF/EP composites, leading to increased initial failure load and breaking load. As to model II interlaminar fracture toughness G(IIC) of laminates, experimental results exhibited that the reinforcing efficacy on the sliding mode shear failure was remarkably increased for the CNTF/CF/EP hybrid composites. Model II interlaminar fracture toughness G(IIC) of laminates has increased from 1292 J/m(2) of the CF/EP to 2869 J/m(2) of the CNTF/CF/EP hybrid composites. There is 120% amplification in G(IIC) testing value. Microstructures of the CF/EP composites and the CNTF/CF/EP hybrid composites were characterized through scanning electron microscope (SEM) for understanding the prominent improvement on the toughening properties. SEM pictures showed that there was strong shear history of the carbon nanotube films via the sliding mode failure. The carbon nanotubes absorbed a great deal of energy through shear sliding and hindered crack growth,leading to increase of the G(IIC) value outstandingly.

The enhanced interlaminar toughness of carbon fiber reinforced poly(ether ether ketone) composites modified by carbon nanotubes

Enhanced interlaminar fracture toughness of CF/PEEK laminates by interleaving CNT-decorated PEEK films

Cellulose Nanocrystal-Polyetherimide Hybrid Nanofibrous Interleaves for Enhanced Interlaminar Fracture Toughness of Carbon Fibre/epoxy Composites

Interlaminar properties of carbon nanotubes modified carbon fibre fabric reinforced polyimide composites

Improvement of Interlaminar Fracture Toughness in Carbon Fiber/epoxy Composites with Carbon Nanotubes/polysulfone Interleaves

Increasing the Toughness While Reducing the Viscosity of Carbon Nano-Tube/polyether Imide/polyether Ether Ketone Nanocomposites

Improving interfacial and mechanical properties of epoxy resin composites by chemical grafting modification of poly‐ether‐ether‐ketone microparticles with carbon nanotubes

mechanical properties of CNT / PEEK nanocomposites

Enhanced Interfacial and Mechanical Properties of Carbon Fiber/peek Composites by Hydroxylated PEEK and Carbon Nanotubes

Enhanced Electrical Conductivity and Interlaminar Fracture Toughness of CF/EP Composites via Interleaving Conductive Thermoplastic Films

Engineering the Mechanical Properties of CNT/PEEK Nanocomposites

Enhanced Interfacial Interactions by PEEK-grafting and Coupling of Acylated CNT for GF/PEEK Composites

Enhancing interlaminar fracture toughness of carbon fiber/epoxy composites toughened by polyethersulfone resin and hybrid carbon nanotubes/graphene oxide

Improving the Interlaminar Fracture Toughness of Carbon/epoxy Laminates by Directly Incorporating with Porous Carbon Nanotube Buckypaper

Composite Interlaminar Fracture Toughness Enhancement Using Electrospun PPO Fiber Veils Regulated by Functionalized CNTs

Increasing the interlaminar fracture toughness and thermal conductivity of carbon fiber/epoxy composites interleaved with carbon nanotube/polyimide composite films

Mode-II Fracture Toughness of Carbon Fiber Reinforced Polymer Composites Interleaved with Polyethersulfone (PES)/Carbon Nanotubes (CNTs)

Improved Interlaminar Crack Resistance of Glass Fiber/poly (phenylene Sulfide) Thermoplastic Composites Modified with Multiwalled Carbon Nanotubes

Improvement of interfacial properties of carbon fiber‐reinforced poly(phthalazinone ether ketone) composites by introducing carbon nanotube to the interphase

CARBON NANOTUBE FILM INTERLAYER TOUGHENED CARBON FIBER REINFORCED EPOXY RESIN HYBRID COMPOSITES

Interlaminar toughening in carbon fiber/epoxy composites interleaved with CNT-decorated polycaprolactone nanofibers