Abstract:This paper develops a one-dimensional simulation model of a thermoelectric module aiming at its characteristic exploration and output performance prediction. Almost all related effects are considered including Seebeck, Peltier, Thomson effects, the spatial- and temperature-dependent thermoelectric material properties, as well as the other irreversible factors. In order to ensure its high accuracy and computational efficiency, the differential equations built for components of non-linear physical properties, and analytical equations for the others of constant properties are jointly solved by numerical methods and implemented in MATLAB integrated development environment. A small deviation of 1.44% exists between its calculated output power and that by a previously reported three-dimensional model under a specific wide load range (0-250 Omega), validating its accuracy of this model. Besides, it indicates that both the proportions of heat leakage through the occupied air zone and its maximum output power to the input total heat flow have the same order of magnitude. A rising proportion for the former has to be paid attention in case of a higher temperature difference applied. The assumption of regarding its electrical contact resistance as an identical external resistance connected with the load in series is computationally proved to generate a negligible discrepancy in terms of TEM characteristics and its output performance. Furthermore, with respect to the impacts of TEM geometry, the pre-set fixed substrate area weakens the equivalence of regarding a thermoelectric module with larger cross-section area of thermoelectric legs as multiple identical modules with smaller leg areas connected in parallel. It accounts for the better linearity of rising output power by a long leg than that by a short leg as the leg area increases. A long thermoelectric leg means an increased induced electrical potential and inner resistance as well, thus leading to a single peak of the output power as the leg length increases. Finally, a thermoelectric geometric optimization approach abased on the Hill-climbing algorithm is introduced and first applied for the maximum output. Its accuracy and efficiency are validated and analyzed detailedly by supplying different variables as initial search point. All the methods and conclusions in this paper can assist thermoelectric generators' performance estimation and guide the geometric optimizations regarding their large-scale applications in the future.

Optimal Design and Multi-Parameter Sensitivity Analysis of a Segmented Thermoelectric Generator

Thermal Analysis on a Segmented Thermoelectric Generator

Numerical Modeling and Optimization of the Segmented PbTe–BiTe-based Thermoelectric Leg

Optimization analysis of a segmented thermoelectric generator based on genetic algorithm

Advantage of a Thermoelectric Generator with Hybridization of Segmented Materials and Irregularly Variable Cross-Section Design

Geometrical Optimization of Segmented Thermoelectric Generators (TEGs) Based on Neural Network and Multi-Objective Genetic Algorithm

Multi-parameter optimization and uncertainty analysis of multi-stage thermoelectric generator with temperature-dependent materials

Performance Assessment of Engine Exhaust-Based Segmented Thermoelectric Generators by Length Ratio Optimization

Optimized High Performance Thermoelectric Generator with Combined Segmented and Asymmetrical Legs under Pulsed Heat Input Power

Optimization of Length Ratio in Segmented Thermoelectric Generators for Engine's Waste Heat Recovery

Performance analysis and design optimization of a compact thermoelectric generator with T-Shaped configuration

A Comprehensive Design Method for Segmented Thermoelectric Generator

Parametric study and design optimization of a thermoelectric generator system for waste heat recovery

Numerical analysis of thermoelectric power generation coupled with temperature-dependent material properties

MODELING AND OPTIMAL DESIGN FOR MICRO-THERMOELECTRIC GENERATOR

An Optimization Study of Structural Size of Parameterized Thermoelectric Generator Module on Performance

Comprehensive Modeling for Geometric Optimization of a Thermoelectric Generator Module

Effect of P-Leg material and resistance ratio on a segmented thermoelectric generator

Segmental material design in thermoelectric devices to boost heat-to-electricity performance

Transient Model and Parameters Matching of a Segmented Solar Thermoelectric System

Elucidating modeling aspects of thermoelectric generator