Abstract:The effects of ultrasonic treatment (UT) on the microstructure and mechanical properties of 10 wt% Mg2Si+1 wt% nano-sized SiC particles (SiCnp for short) hybrid reinforced Al-Cu alloy matrix composites were investigated for first time. The existence of Mg2Si phase solves the problem effectively that the particle content of SiCnp/Al-Cu composites cannot be high by the external addition of SiCnp and casting method. The results show that after UT, the big eutectic Mg2Si phase was remarkably refined, from coarse Chinese characters (about 50 mu m) to fine strips or dots (about 0.5-2 mu m). Meanwhile SiCnp agglomerations were also eliminated, and both Mg2Si phase and SiCnp were uniformly distributed in the composites. The interaction between Mg2Si and SiCnp was discussed to analyze this behavior that SiCnp could act as heterogeneous nucleus of Mg2Si phase, or be captured by the Mg2Si solid front during solidification, leading to the refinement of eutectic Mg2Si phase. It was also found that the effects of UT could be even improved by using squeeze casting (SC), instead of gravity casting (GC). The as-cast ultimate tensile strength (UTS) and elongation of hybrid Mg2Si + SiCnp/Al-Cu composites fabricated by combining UT and SC were enhanced to 336 MPa and 3.0%, which were increased by 31.3% and 130.8%, respectively, compared with the composites without UT. The UTS of the hybrid Mg2Si + SiCnp/Al-Cu composites was also 33.5% higher than that of the Al-Cu matrix alloy and 23.5% higher than that of 1 wt% SiCnp/Al-Cu composites prepared by the same process. (C) 2019 Elsevier B.V. All rights reserved.

Effects of nanoparticles on the solution treatment and mechanical properties of nano-SiCp/Al-Cu composites

Precipitation behavior and mechanical properties of Al-Zn-Mg-Cu matrix nanocomposites: Effects of SiC nanoparticles addition and heat treatment

Effects of TiC0.5N0.5 Nanoparticles on the Microstructure, Mechanical and Thermal Properties of TiC0.5N0.5/Al-Cu Nanocomposites

Effects of Nano-Sicp Content on Microstructure and Mechanical Properties of SiCp/A356 Composites Assisted with Ultrasonic Treatment

Effects of nano-TiCp on the microstructures and tensile properties of TiCp/Al–Cu composites

Nano-SiCP Particles Distribution and Mechanical Properties of Al-matrix Composites Prepared by Stir Casting and Ultrasonic Treatment

Variation of Microstructure and Mechanical Properties with Nano-Sicp Levels in the Nano-Sicp/alcumnti Composites

Microstructures and Tensile Properties of Al–Cu Matrix Composites Reinforced with Nano-Sized SiCp Fabricated by Semisolid Stirring Process

Effects of SiC Nanoparticle Content on the Microstructure and Tensile Mechanical Properties of Ultrafine Grained AA6063-SiCnp Nanocomposites Fabricated by Powder Metallurgy

Particle Distribution and Mechanical Properties of Nano-SiCP/Al-Cu Composites

Effects of Ultrasonic Vibration on Microstructure and Mechanical Properties of Nano-Sized SiC Particles Reinforced Al-5Cu Composites.

Effect of Nano-Sic Content on Mechanical Properties of Sic/2014al Composites Fabricated by Powder Metallurgy Combined with Hot Extrusion

Mechanical properties and microscopic analysis of SiCP/Al composites

Effects of Particle Content on Microstructure and Mechanical Properties of SiCp/A356 Composites

Variation of Microstructure and Mechanical Properties of Hybrid Particulates Reinforced Al-alloy Matrix Composites with Ultrasonic Treatment

Microstructures and Tensile Properties of Nano-Sized SiCp/Al-Cu Composites Fabricated by Semisolid Stirring Assisted with Hot Extrusion

Investigation of Microstructures and Mechanical Properties of SiC/AA2024 Nanocomposites Processed by Powder Metallurgy and T6 Heat Treatment

Atomic-level Study on Mechanical Properties and Strengthening Mechanisms of Al/SiC Nano-Composites

Investigation of microstructures and mechanical properties of ultrafine SiC reinforced pure Al matrix composites

Microstructures and mechanical properties of nano-sized SiC particle reinforced pure Al based composites

Effects of nanosized TiCp dispersion on the high-temperature tensile strength and ductility of in situ TiCp/Al-Cu-Mg-Si nanocomposites