Abstract:The icing of overhead aluminum conductors is a serious threat to the safe operation of power systems. Various coatings for anti-icing have to face the challenge of durability. Superhydrophobic (SHP) coatings with self-healing properties are gradually showing good anti-icing durability. Herein, SHP self-healing surfaces with composite pore structures were successfully constructed on 1060 aluminum by two-step anodizing and infusion of triethoxy (1H,1H,2H, 2H-perfluoro-1-octyl)silane (POTS). A preparation process of composite pore structure consisting of upper layer of large pores and lower layer of small pores was designed and obtained via two-step anodizing. The impregnated POTS modified the composite pore structure to achieve superhydrophobicity while providing self-healing properties. The SHP surfaces with excellent performance were prepared by optimizing the appropriate current density and oxidation time. The contact and sliding angles were 166.5° and 0.5°, respectively. The frosting time was extended to 175 min, whereas the ice adhesion strength was lowered to 4.3 kPa. Additionally, the SHP surface with composite pore structure demonstrated superior durability and self-healing properties to single pore structure. The composite pore structure could maintain outstanding superhydrophobicity after 12 times of damage/self-healing compared to single pore structure (eight times). The SHP surface with composite pore structure successfully self-healed three times and withstood 135 icing/deicing cycles keeping the ice adhesion strength below 20 kPa, which is preferable to single pore structure (two times). The SHP self-healing aluminum surfaces developed in this work are highly promising for application and can promote the development of SHP coatings for anti-icing on power transmission lines.

Anti-Icing Mechanism for a Novel Slippery Aluminum Stranded Conductor

Experimental Studies of a Novel Anti-Icing Aluminum Conductor With Excellent Durability and Improved Electrical Performance

Fabrication of Slippery Surfaces on Aluminum Alloy and Its Anti-Icing Performance in Glaze Ice

Fabrication of Ultralow Ice-Adhesion Slippery Liquid Infused Porous Surfaces on Aluminum Alloy (7075-T651)

Fabrication of a Porous Slippery Icephobic Surface and Effect of Lubricant Viscosity on Anti-Icing Properties and Durability

A novel slippery liquid infused porous aluminum conductor with excellent corrosion resistance in simulated marine atmosphere

A novel durable anti-icing slippery surfaces with dendritic porous structure

Preparation and Performance Study of Low Surface Energy Anti-Icing Coating for Transmission Lines

Enhanced corrosion resistance of slippery liquid infused porous aluminum surfaces prepared by anodizing in simulated marine atmosphere

Slippery lubricant-infused porous surface based on porous aluminum oxide used for anti-fouling and passive defrosting performance

Effects of the Second Anodization Parameters on the Hydrophobicity and Anti-Icing Properties of Al Surface with Composite Nanopore Structure

Liquid-like slippery surface with passive-multi active strategy integration for anti-icing/de-icing

Durable slippery liquid-infused porous surfaces for effective corrosion protection of aluminum alloy in ethylene glycol-water solutions

Temperature self-regulating electrothermal pseudo-slippery surface for anti-icing

A composite pore-structured superhydrophobic aluminum surface for durable anti-icing

Mechanically robust cable superhydrophobic coating with passive anti-icing and rapid deicing performance

Robust Slippery Coating with Superior Corrosion Resistance and Anti-Icing Performance for AZ31B Mg Alloy Protection.

Study of Anti-Icing Performance of Insulator Strings Bottom-Coated with Semiconductive Silicone Rubber Coating

Durable anti-icing coating with stability based on self-regulating oil storage layer

Fabrication and Experimental Study of Micro/Sub-Micro Porous Copper Coating for Anti-Icing Application

Durability of a Lubricant-Infused Electrospray Silicon Rubber Surface As an Anti-Icing Coating