Abstract:Wind turbine blades are often covered with ice and snow, which inevitably reduces their power generation efficiency and lifetime. Recently, a superhydrophobic surface has attracted widespread attention due to its potential values in anti-icing/deicing. However, the superhydrophobic surface can easily transition from Cassie-Baxter to Wenzel at low temperature, limiting its wide applications. Herein, inspired by the excellent water resistance and cold tolerance of Trifolium repens L. endowed by its micronano structure and low surface energy, a fresh structure was prepared by combining femtosecond laser processing technology and a boiling water treatment method. The prepared icephobic surface aluminum alloy (ISAl) mainly consists of a periodic microcrater array, nonuniform microclusters, and irregular nanosheets. This three-scale structure greatly promotes the stability of the Cassie-Baxter state. The critical Laplace pressure of ISAl is up to 1437 Pa, and the apparent water contact angle (CA) is higher than 150° at 0 °C. Those two factors contribute to its excellent anti-icing and deicing performances. The results show that the static icing delay time reaches 2577 s, and the ice adhesion strength is only 1.60 kPa. Furthermore, the anti-icing and deicing abilities of the proposed ISAl were examined under the environment of low temperature and high relative humidity to demonstrate its effectiveness. The dynamic anti-icing time of ISAl in extreme environments is up to 5 h, and ice can quickly fall with a speed of 34 r/min when it is in a horizontal rotational motion. Finally, ISAl has excellent reusability and mechanical durability, with the ice adhesion strength still being less than 6 kPa and the CA greater than 150° after 15 cycles of icing-deicing tests. The proposed structure would offer a promising strategy for the efficient anti-icing and deicing of wind turbine blades.

Experimental Studies of a Novel Anti-Icing Aluminum Conductor With Excellent Durability and Improved Electrical Performance

Effects of the Second Anodization Parameters on the Hydrophobicity and Anti-Icing Properties of Al Surface with Composite Nanopore Structure

Anti-Icing Mechanism for a Novel Slippery Aluminum Stranded Conductor

A composite pore-structured superhydrophobic aluminum surface for durable anti-icing

A novel slippery liquid infused porous aluminum conductor with excellent corrosion resistance in simulated marine atmosphere

Research on Electrocaloric Effect and Ice-Water Switching Principle Based Anti-Icing Coating for Insulators of Overhead Transmission Lines and Its Performance

Assessing the Superhydrophobic Performance of Laser Micropatterned Aluminium Overhead Line Conductor Material

Preparation and Performance Study of Low Surface Energy Anti-Icing Coating for Transmission Lines

Mechanically robust cable superhydrophobic coating with passive anti-icing and rapid deicing performance

Construction technology and application effects of a novel anti-icing coating for insulator

Robust superhydrophobic aluminum alloy surfaces with anti-icing ability, thermostability, and mechanical durability

Study of Anti-Icing Performance of Insulator Strings Bottom-Coated with Semiconductive Silicone Rubber Coating

A Superhydrophobic Anti-Icing Surface with a Honeycomb Nanopore Structure

Trifolium repens L.-Like Periodic Micronano Structured Superhydrophobic Surface with Ultralow Ice Adhesion for Efficient Anti-Icing/Deicing

A superhydrophobic/photothermal synergistic anti-icing mesh with active/passive anti-icing function

Spraying Fabrication of Durable and Transparent Coatings for Anti-Icing Application: Dynamic Water Repellency, Icing Delay, and Ice Adhesion

Easily Applicable Superhydrophobic Composite Coating with Improved Corrosion Resistance and Delayed Icing Properties

Anti-icing Mechanism and Operation Performance Research of Insulator String by Using Semiconductive Coating Based on Switch-off Effect

In-situ fabrication of superhydrophobic surface on copper with excellent anti-icing and anti-corrosion properties

Durable and robust PVDF-HFP/SiO2/CNTs nanocomposites for anti-icing application: Water repellency, icing delay, and ice adhesion

A Review of Icing and Anti-Icing Technology for Transmission Lines