Abstract:In hydraulic fracturing, fracturing fluids are used to create fractures in a hydrocarbon reservoir throughout transported proppant into the fractures. The application of many fields proves that conventional fracturing fluid has the disadvantages of residue(s), which causes serious clogging of the reservoir's formations and, thus, leads to reduce the permeability in these hydrocarbon reservoirs. The development of clean (and cost-effective) fracturing fluid is a main driver of the hydraulic fracturing process. Presently, viscoelastic surfactant (VES)-fluid is one of the most widely used fracturing fluids in the hydraulic fracturing development of unconventional reservoirs, due to its non-residue(s) characteristics. However, conventional single-chain VES-fluid has a low temperature and shear resistance. In this study, two modified VES-fluid are developed as new thickening fracturing fluids, which consist of more single-chain coupled by hydrotropes (i.e., ionic organic salts) through non-covalent interaction. This new development is achieved by the formulation of mixing long chain cationic surfactant cetyltrimethylammonium bromide (CTAB) with organic acids, which are citric acid (CA) and maleic acid (MA) at a molar ratio of (3:1) and (2:1), respectively. As an innovative approach CTAB and CA are combined to obtain a solution (i.e., CTAB-based VES-fluid) with optimal properties for fracturing and this behaviour of the CTAB-based VES-fluid is experimentally corroborated. A rheometer was used to evaluate the visco-elasticity and shear rate & temperature resistance, while sand-carrying suspension capability was investigated by measuring the settling velocity of the transported proppant in the fluid. Moreover, the gel breaking capability was investigated by determining the viscosity of broken VES-fluid after mixing with ethanol, and the degree of core damage (i.e., permeability performance) caused by VES-fluid was evaluated while using core-flooding test. The experimental results show that, at pH-value ( 6.17 ), 30 (mM) VES-fluid (i.e., CTAB-CA) possesses the highest visco-elasticity as the apparent viscosity at zero shear-rate reached nearly to 10 6 (mPa·s). Moreover, the apparent viscosity of the 30 (mM) CTAB-CA VES-fluid remains 60 (mPa·s) at (90 ∘ C) and 170 (s - 1 ) after shearing for 2-h, indicating that CTAB-CA fluid has excellent temperature and shear resistance. Furthermore, excellent sand suspension and gel breaking ability of 30 (mM) CTAB-CA VES-fluid at 90 ( ∘ C) was shown; as the sand suspension velocity is 1.67 (mm/s) and complete gel breaking was achieved within 2 h after mixing with the ethanol at the ratio of 10:1. The core flooding experiments indicate that the core damage rate caused by the CTAB-CA VES-fluid is ( 7.99 % ), which indicate that it does not cause much damage. Based on the experimental results, it is expected that CTAB-CA VES-fluid under high-temperature will make the proposed new VES-fluid an attractive thickening fracturing fluid.

Experimental study of rheology and filter loss performance of nano-ZnO-modified VES fracturing fluid

Experimental Study on the Stability of a Novel Nanocomposite-Enhanced Viscoelastic Surfactant Solution as a Fracturing Fluid under Unconventional Reservoir Stimulation

Rheological Properties and Formation Dynamic Filtration Damage Evaluation of a Novel Nanoparticle-Enhanced VES Fracturing System Constructed with Wormlike Micelles

Rheological Characteristics of Viscoelastic Surfactant Fluid Mixed with Silica Nanoparticles

A Novel ZnO Nanoparticles Enhanced Surfactant Based Viscoelastic Fluid Systems for Fracturing under High Temperature and High Shear Rate Conditions: Synthesis, Rheometric Analysis, and Fluid Model Derivation

Experimental Investigation and Performance Evaluation of Modified Viscoelastic Surfactant (VES) as a New Thickening Fracturing Fluid

Review on High-Temperature-Resistant Viscoelastic Surfactant Fracturing Fluids: State-of-the-Art and Perspectives

Experimental Evaluations of Nano High-Viscosity Friction Reducers to Improve Acid Fracturing Efficiency in Low-Permeability Carbonate Reservoirs

Performance evaluation of oil-displacement viscoelastic zwitterionic surfactant fracturing fluid

Study on Low Damage VES-M Clean Fracturing Fluid for Shallow Oil and Gas Reservoirs in E'nan Area

Preparation and performance evaluation of viscoelastic zwitterionic surfactant for cleaning fracturing fluids

High Performance Clean Fracturing Fluid Using a New Tri-Cationic Surfactant

Performance Evaluation and Formation Mechanism of Viscoelastic Surfactant Fracturing Fluids with Moderate Interfacial Activity Enhanced by Janus-SiO 2 Nanoparticles

Review on Enhancing Rheological Characteristics of Viscoelastic Surfactant Fracturing Fluids by Nanoparticles: Advances, Challenges, and Perspectives

Improvement of the Rheological Behavior of Viscoelastic Surfactant Fracturing Fluids by Metallic-Type Nanoparticles

Organic Acid-Enhanced Viscoelastic Surfactant and Its Application in Fracturing Fluids

Viscoelastic Surfactant Fracturing Fluids for Use in Coal Seams: Effects of Surfactant Composition and Formulation

Study on Nano-Materials Improving Fracturing Fluid Performance and Oil Displacement Mechanism

Performance evaluation and formation mechanism of Janus-SiO 2 nanoparticles assisted viscoelastic surfactant fracturing fluids

A Novel Nanotube/VES-Based High Temperature High Pressure Fracturing Fluid

Viscosity Reduction Mechanism in High Temperature of a Gemini Viscoelastic Surfactant (VES) Fracturing Fluid and Effect of Counter-Ion Salt (kcl) on Its Heat Resistance