Abstract:Summary Hydraulic fracturing is an effective stimulation method to establish high-conductivity channels in tight reservoirs, and the effectiveness of man-made fractures largely depends on the proppant-carrying capacity of the fracturing fluids used. As a novel completion fluid, silica gel-based fracturing fluids have shown desirable stimulation effect in application cases, but a comprehensive evaluation of their proppant settling and transport behaviors in the laboratory remains lacking. In this paper, a silica gel-based fracturing fluid was prepared first, and then the rheological properties, including shear thinning, recovery behavior, and viscoelasticity of the fluid system, were measured. Afterward, the settling velocity of single-particle proppant and the settling rate of multiparticle proppant under various experimental conditions were investigated in the static fluid system; in addition, the dynamic proppant-carrying performance was evaluated using a visualized rough fracture model to study different factors on the dune distribution inside the fractures. Lastly, the proppant-carrying mechanism of silica gel-based fracturing fluid was revealed in three aspects. The rheological test result showed that the shear viscosity of silica gel-based fracturing fluid increased as the SiO2 concentration increased. Furthermore, all tested fluid samples exhibited an elastic modulus that is consistently greater than the viscous modulus, indicating that the silica gel-based fracturing fluid system has a dominant elastic response behavior. In the single-particle static settling test, there was a significant increase in the settling velocities as the particle diameter increased and as the temperature increased. Meanwhile, the settling rate of multiparticles showed a decreasing trend with the increase in mesh size, while the proppant settling rate gradually increased as the proppant concentration rose. The results of dynamic proppant-carrying experiments demonstrate that a higher pumping rate leads to an extended migration distance for proppant, resulting in formed sand dunes with reduced height within fractures. Conversely, an increase in proppant concentration and a reduction in mesh size tend to form higher sand dunes. The proppant-carrying mechanisms of the silica gel-based fracturing fluid relate to the self-polymerization and syneresis of silica gel, the noticeable elasticity characteristics, and the structural encapsulation effect formed between silica gel and proppant. A better understanding of the proppant settling and transport behaviors of silica gel-based fracturing fluid can be helpful in optimizing the hydraulic fracturing design and promoting field application.

Study on Nano-Materials Improving Fracturing Fluid Performance and Oil Displacement Mechanism

Urchin-like SiO 2 Nanospheres for Enhancing the Performance of Clean Fracturing Fluids

Study on the Mechanism of Nanoemulsion Removal of Water Locking Damage and Compatibility of Working Fluids in Tight Sandstone Reservoirs

Development and Performance Evaluation of a Novel Silica Nanoparticle-Reinforced CO 2 -Sensitive Fracturing Fluid with High Temperature and Shear Resistance Ability

Novel hydraulic fracturing fluids with improved proppant carrying capacity and pH-adjustable proppant deposition behavior

Experimental Research on the Proppant Settling and Transport Characteristics of Silica Gel-Based Fracturing Fluid

Study on Gas Adsorption-Desorption and Diffusion Behaviour in Coal Pores Modified by Nano Fracturing Fluid

Experimental study of rheology and filter loss performance of nano-ZnO-modified VES fracturing fluid

Experimental Study on the Stability of a Novel Nanocomposite-Enhanced Viscoelastic Surfactant Solution as a Fracturing Fluid under Unconventional Reservoir Stimulation

The flooding mechanism and oil recovery of nanoemulsion on the fractured/non-fractured tight sandstone based on online LF-NMR experiments

Parameter optimization and field test of nano variable-viscosity slick water fracturing in Changqing shale reservoir

Synergistic Effect of Carbon Nanotubes, Zinc, and Copper Oxides on Rheological Properties of Fracturing Fluid: A Comparative Study

Synthesis of superamphiphobic nanofluid as a multi-functional additive in oil-based drilling fluid, especially the stabilization performance on the water/oil interface

Positive roles and synergistic mechanism of graphene oxide in improving fracturing fluid performances

Performance Evaluation and Formation Mechanism of Viscoelastic Surfactant Fracturing Fluids with Moderate Interfacial Activity Enhanced by Janus-SiO 2 Nanoparticles

Investigation on the microscopic damage mechanism of fracturing fluids to low-permeability sandstone oil reservoir by nuclear magnetic resonance

Nanoparticle-Assisted Surfactant/Polymer Formulations for Enhanced Oil Recovery in Sandstone Reservoirs: From Molecular Interaction to Field Application

Study on the main factors and mechanism of functional silica nanofluid spontaneous imbibition for enhanced oil recovery

Novel approach to improve shale stability using super-amphiphobic nanoscale materials in water-based drilling fluids and its field application

The enhancement of performance and imbibition effect of slickwater-based fracturing fluid by using MoS2 nanosheets

Synthesis and Characterization of Self-Dispersion Monodisperse Silica-Based Functional Nanoparticles for Enhanced Oil Recovery (EOR) in Low-Permeability Reservoirs