Abstract:In hydraulic fracturing, fracturing fluids are used to create fractures in a hydrocarbon reservoir throughout transported proppant into the fractures. The application of many fields proves that conventional fracturing fluid has the disadvantages of residue(s), which causes serious clogging of the reservoir's formations and, thus, leads to reduce the permeability in these hydrocarbon reservoirs. The development of clean (and cost-effective) fracturing fluid is a main driver of the hydraulic fracturing process. Presently, viscoelastic surfactant (VES)-fluid is one of the most widely used fracturing fluids in the hydraulic fracturing development of unconventional reservoirs, due to its non-residue(s) characteristics. However, conventional single-chain VES-fluid has a low temperature and shear resistance. In this study, two modified VES-fluid are developed as new thickening fracturing fluids, which consist of more single-chain coupled by hydrotropes (i.e., ionic organic salts) through non-covalent interaction. This new development is achieved by the formulation of mixing long chain cationic surfactant cetyltrimethylammonium bromide (CTAB) with organic acids, which are citric acid (CA) and maleic acid (MA) at a molar ratio of (3:1) and (2:1), respectively. As an innovative approach CTAB and CA are combined to obtain a solution (i.e., CTAB-based VES-fluid) with optimal properties for fracturing and this behaviour of the CTAB-based VES-fluid is experimentally corroborated. A rheometer was used to evaluate the visco-elasticity and shear rate & temperature resistance, while sand-carrying suspension capability was investigated by measuring the settling velocity of the transported proppant in the fluid. Moreover, the gel breaking capability was investigated by determining the viscosity of broken VES-fluid after mixing with ethanol, and the degree of core damage (i.e., permeability performance) caused by VES-fluid was evaluated while using core-flooding test. The experimental results show that, at pH-value ( 6.17 ), 30 (mM) VES-fluid (i.e., CTAB-CA) possesses the highest visco-elasticity as the apparent viscosity at zero shear-rate reached nearly to 10 6 (mPa·s). Moreover, the apparent viscosity of the 30 (mM) CTAB-CA VES-fluid remains 60 (mPa·s) at (90 ∘ C) and 170 (s - 1 ) after shearing for 2-h, indicating that CTAB-CA fluid has excellent temperature and shear resistance. Furthermore, excellent sand suspension and gel breaking ability of 30 (mM) CTAB-CA VES-fluid at 90 ( ∘ C) was shown; as the sand suspension velocity is 1.67 (mm/s) and complete gel breaking was achieved within 2 h after mixing with the ethanol at the ratio of 10:1. The core flooding experiments indicate that the core damage rate caused by the CTAB-CA VES-fluid is ( 7.99 % ), which indicate that it does not cause much damage. Based on the experimental results, it is expected that CTAB-CA VES-fluid under high-temperature will make the proposed new VES-fluid an attractive thickening fracturing fluid.

Organic Acid-Enhanced Viscoelastic Surfactant and Its Application in Fracturing Fluids

A Novel CO2 and Pressure Responsive Viscoelastic Surfactant Fluid for Fracturing

Preparation and performance evaluation of viscoelastic zwitterionic surfactant for cleaning fracturing fluids

Experimental Investigation and Performance Evaluation of Modified Viscoelastic Surfactant (VES) as a New Thickening Fracturing Fluid

A smart recyclable VES fluid for high temperature and high pressure fracturing

Novel Trends in the Development of Surfactant-Based Hydraulic Fracturing Fluids: A Review

Research progress of viscoelastic surfactant solutions applied to hydraulic fracturing and matrix acidizing

Review on High-Temperature-Resistant Viscoelastic Surfactant Fracturing Fluids: State-of-the-Art and Perspectives

Performance Evaluation and Formation Mechanism of Viscoelastic Surfactant Fracturing Fluids with Moderate Interfacial Activity Enhanced by Janus-SiO 2 Nanoparticles

pH-responsive clean fracturing fluid based on pseudo-trimeric surfactants

Performance evaluation and formation mechanism of Janus-SiO 2 nanoparticles assisted viscoelastic surfactant fracturing fluids

Viscoelastic Surfactant Fracturing Fluids for Use in Coal Seams: Effects of Surfactant Composition and Formulation

Chemical and Rheological Principles of Viscoelastic Surfactant Fracturing Fluid

Performance evaluation of oil-displacement viscoelastic zwitterionic surfactant fracturing fluid

Experimental Study on the Stability of a Novel Nanocomposite-Enhanced Viscoelastic Surfactant Solution as a Fracturing Fluid under Unconventional Reservoir Stimulation

Novel hydraulic fracturing fluids with improved proppant carrying capacity and pH-adjustable proppant deposition behavior

Rheological Characteristics of Viscoelastic Surfactant Fluid Mixed with Silica Nanoparticles

pH-responsive viscoelastic supramolecular viscosifiers based on dynamic complexation of zwitterionic octadecylamidopropyl betaine and triamine for hydraulic fracturing applications

Synthesis and Characterization of Surfactant for Retarding Acid–Rock Reaction Rate in Acid Fracturing

Viscosity Reduction Mechanism in High Temperature of a Gemini Viscoelastic Surfactant (VES) Fracturing Fluid and Effect of Counter-Ion Salt (kcl) on Its Heat Resistance

Formation and Rheologic Behavior of Viscoelastic Micelle Fracturing Fluids