Abstract:This study aims to investigate the tensile failure behaviours and corresponding fracture mechanisms of basalt fiber reinforced lightweight-aggregate concrete (BFLAC) at various temperatures via a comprehensive cryogenic tests and mesoscale simulations, with a special focus on the quantitative effects of cryogenic temperature and fiber volume fraction. Firstly, Macro- and micro-scale split-tensile tests of BFLAC with fiber volume fractions of 0.0-0.3 % at 20 similar to-90 degree celsius were conducted. Secondly, a two-steps sequentially thermo-mechanical coupled mesoscale analysis approach with explicit modelling of fibers and pore ice was developed to simulate the corresponding direct-tensile failures of BFLAC with more fiber volume fractions. The results show that as the temperature falls from 20 degree celsius to -90 degree celsius, the dominant action mechanism of basalt fibers changes from Mode-1 (pullout of fibers) to Mode-2 (rupture of fibers) due to the ice formation and the interactions between mesocomponents. Tensile strengths of BFLAC present a significant low-temperature enhancing effect, with a maximum increase of 90 % for direct-tensile strength while 104 % for split-tensile strength. Besides, as the temperature drops, although a larger proportion of fibers are in a low bridging stress state and a smaller proportion reach yield stress for rupture, the average fiber stress increases and the utilization degree of fibers with more stresses transferred improves, which results in that the fiber reinforcement effect is strengthened. Finally, based on experimental and numerical results, the quantitative relationships between split-tensile and directtensile strengths at different cryogenic temperatures were given. The present research results can better understand the cryogenic mechanical properties of BFLAC, which have important reference value for its extensive promotions and applications in engineering structures exposed to extreme low-temperature environments.

Mechanical and fracture properties of alkali-activated concrete exposed to cryogenic temperature

An experimental investigation and fractal modeling on the effective thermal conductivity of novel autoclaved aerated concrete (AAC)-based composites with silica aerogels (SA)

Behaviour of alkali-activated concrete at elevated temperatures: A critical review

Mechanical and micro‐characterization of alkali‐activated concrete under high‐temperature exposure

Experimental and numerical investigation on thermal properties of alkali-activated concrete at elevated temperatures

Experimental investigation on the deterioration of the physical and mechanical properties of autoclaved aerated concrete at elevated temperatures

Mechanical Properties of High Early Strength Class C Fly Ash-Based Alkali Activated Concrete

Effects of Low Temperatures and Cryogenic Freeze-Thaw Cycles on Concrete Mechanical Properties: A Literature Review

Experimental investigation on electrical response and mechanical performance of cementitious materials at low temperatures

Experimental Study on Mechanical Properties of Concrete Under Cryogenic-normal Temperatures Cycles

Experimental study on compressive strength of concrete with different water content experiencing cryogenic freeze-thaw cycles from room temperature to-190 ℃

Mechanism Analysis on Tensile Fracture Properties of Heterogeneous BFLAC at Cryogenic Temperature: Experimental Investigation and Mesoscale Simulation

The use of AE technique for identifying ductility degradation against cryogenic on flexural performance of UHPC at various temperature conditions

Experimental study on compressive strength of concrete exposed to cryogenic temperature

EXPERIMENTAL RESEARCH ON DEFORMATION BEHAVIOR OF CONCRETE WITH DIFFERENT WATER CONTENTS AFTER CRYOGENIC FREEZE-THAW CYCLES FROM ROOM TEMPERATURE TO -190 ℃

The cryogenic mechanical properties of translucent alumina

Thermal-dependent brittleness effect of ultra-high performance concrete exposed to cryogenic flexural loads by acoustic emission evaluation

Effect of Pore Structure on Thermal Conductivity and Mechanical Properties of Autoclaved Aerated Concrete

Mechanical properties and dynamic constitutive relation of lightweight shale ceramsite concrete

Mechanical Performances and Frost Resistance of Alkali-Activated Coal Gangue Cementitious Materials

Study on the Fracture Mechanical Properties of High Performance Concrete (HPC) with Rapid Cooling after High Temperature