Abstract:The proton-exchange membrane fuel cell (PEMFC) bipolar plate serpentine flow channel U-shaped region is prone to the accumulation effect, which poses serious difficulties for fuel cell water management. As a result, a deep understanding of water transport in the U-shaped region is essential to improve the fuel cell performance. Under this direction, in this work, the impact of the different microstructure parameters and initial conditions on water transport in the U-shaped region was compared with and without microstructure using the volume of the fluid method. On top of that, the velocity field distribution in the X-direction and the pressure drop distribution in the flow channel were also analyzed. From the acquired results, it was demonstrated that due to the secondary flow caused by the bending property of the microstructure, the droplet movement time in the U-shaped region was significantly shortened after the microstructure was added in the U-shaped region. The initial conditions strongly affected the droplet motion, and a larger contact angle enhanced the wall hydrophobicity to facilitate the droplet discharge. An increase in the droplet diameter led also to a rise in the windward area and shear force, which shortened droplet discharge time. Interestingly, if the waveform microstructure has too-large crests, gullies will be created that will impede the droplet motion and increase the amplitude of the droplet oscillation, resulting in excessive pressure drop in the flow channel. A too-large period led to increased droplet momentum loss, whereas a short period reduced the wall contact angle, which is not conducive to drainage. The microstructure spacing significantly affected the droplet motion, and the reduced spacing increased the airflow diffusion effect to accelerate the flow rate. The main focus of this work was led on the application of the microstructure in a U-shaped region of the serpentine flow channel, which is of great specific significance for droplet removal inside the flow channel.

Investigation of liquid retention behavior in the flow field plate of large-size proton exchange membrane fuel cells: Effects of sub-distribution zone

Effects of sub-distribution zone structure of bipolar plate on the mass transport of large-area proton exchange membrane fuel cells

Liquid Water Transport Characteristics and Droplet Dynamics of Proton Exchange Membrane Fuel Cells with 3D Wave Channel

Lattice Boltzmann Simulations of Liquid Droplets Development and Interaction in A Gas Channel of A Proton Exchange Membrane Fuel Cell

Effects of Microstructure on Water Removal in the U-Shaped Region of PEMFC Serpentine Flow Channel

Numerical Modeling of Liquid Water Transport Inside and Across Membrane in PEM Fuel Cells

Three-Dimensional Lattice Boltzmann Simulation of Liquid Water Transport in Porous Layer of PEMFC.

Experimental and Simulation Analysis of Liquid Capillary Fingering Process in the Gas Diffusion Layer

Design and Modelling of 3D Bionic Cathode Flow Field for Proton Exchange Membrane Fuel Cell

Numerical Simulation of Three-Dimensional Gas/liquid Two-Phase Flow in a Proton Exchange Membrane Fuel Cell

Investigation on performance of full-scale proton exchange membrane fuel cell: Porous foam flow field with integrated bipolar plate/gas diffusion layer

All-scale investigation of a commercial proton exchange membrane fuel cell with partially narrow channels

Synergistic mass transfer and performance stability of a proton exchange membrane fuel cell with traveling wave flow channels

Modeling Research of the Impact of Liquid Water in Channel on Gas and Water Transport in Proton Exchange Membrane Fuel Cell

Two-phase flow dynamics study in the trapezoidal gas channel of PEM fuel cell based on lattice Boltzmann model

Numerical simulation of two-phase flow in a multi-gas channel of a proton exchange membrane fuel cell

Liquid Water Transport and Distribution in the Gas Diffusion Layer of a Proton Exchange Membrane Fuel Cell Considering Interfacial Cracks

Performance enhancement in a proton exchange membrane fuel cell with a novel 3D flow field

Modeling and analysis of internal water transfer behavior of PEM fuel cell of large surface area

An experimental study on gas and liquid two-phase flow in orientated-type flow channels of proton exchange membrane fuel cells by using a side-view method

Characterizing the two-phase flow effect in gas channel of proton exchange membrane fuel cell with dimensionless number